Investigation of si anode for LI ion batteries

... debilitating volume expansion during lithiation 2.6 Silicon Anode Silicon was electrochemically investigated to explore the possibility of using Si as an anode replacement for Li- metal (due to Li- metal’s ... the formation of Li2 2Si5 alloy) during lithiation prevents good cycling performance of Si anodes To mitigate the problem associated with volume expansion of the Si anode on lithiation, many approaches ... Conversion Reaction Binary metal oxides store Li via a conversion reaction with the formation and decomposition of Li2 O as shown in Eq (2.4) [74], lithiation  MO  2Li   2e  Li2 O...

Báo cáo hóa học: " Hollow Nanostructured Anode Materials for Li-Ion Batteries" pdf

... performance The present article provides a simple overview on the hollow nanostructured anode materials for Li-ion batteries, including carbon materials, metals, metal oxides, and their hybrid materials ... synthesis and application of hollow nanostructured anode materials used in Li-ion batteries based on carbon materials, metals, metal oxides, and their hybrid materials Hollow nanomaterials play a great ... for practical application of Si as the anode for Li-ion batteries To overcome this drawback, two strategies have been proposed: using composite materials and forming nanostructured Si-based materials...

Báo cáo toán học: " Electrochemical performance of NixCo1-xMoO4 (0 [less than or equal to] x [less than or equal to] 1) nanowire anodes for lithium-ion batteries" pptx

... Electrochemical performance of NixCo1−xMoO4 (0 ≤ x ≤ 1) nanowire anodes for lithium-ion batteries Kyung-Soo Park1, Seung-Deok Seo1, Hyun-Woo Shim1, and Dong-Wan Kim*1 Department of Materials ... fabrication of NixCo1−xMoO4 (0 ≤ x ≤ 1) nanowire electrodes by a hydrothermal method, followed by thermal post-annealing We also demonstrate the superior electrochemical performance of NixCo1−xMoO4 nanowires ... images of NixCo1−xMoO4 (0 ≤ x ≤ 1) nanowires obtained by post-annealing the NixCo1−xMoO4·nH2O nanowire precursors at 500°C for h All postannealed samples maintained their pristine nanowire morphologies...

Báo cáo hóa học: " Synthesis and characterization of integrated layered nanocomposites for lithium ion batteries" ppt

... doi:10.1186/1556-276X-7-60 Cite this article as: Gim et al.: Synthesis and characterization of integrated layered nanocomposites for lithium ion batteries Nanoscale Research Letters 2012 7:60 ... range of stoichiometric compositions Therefore, the present work reports on the synthesis and systematic investigations on the structure, morphology, and electrochemical performances of an integrated ... results and wrote the paper JS, HP, JWK, and KK participated in the characterization of samples and carried out experiments VM contributed to the technical discussions All the authors have read and...

Báo cáo hóa học: " Copper nanofiber-networked cobalt oxide composites for high performance Li-ion batteries" potx

... candidate for use in the electrodes of high- performance Li-ion batteries Abbreviations CuNFs@CoOx: copper nanofiber-networked cobalt oxide; CuNFs: copper nanofibers; CoOxTF: cobalt oxide thin-film; ... doi:10.1186/1556-276X-6-292 Cite this article as: Nam et al.: Copper nanofiber-networked cobalt oxide composites for high performance Li-ion batteries Nanoscale Research Letters 2011 6:292 Submit ... Investigation of cobalt oxides as anode materials for Li-ion batteries J Power Sources 2002, 109:142 19 Do J-S, Weng C-H: Electrochemical and charge/discharge properties of the synthesized cobalt oxide...

báo cáo hóa học:" Synthesis and characterization of integrated layered nanocomposites for lithium ion batteries" pdf

Carbon and tin based nanostructured anode materials for lithium ion batteries

... Thesis Spine CARBON AND TIN BASED NANOSTRUCTURED ANODE MATERIALS FOR LITHIUM ION BATTERIES DENG DA 2009 CARBON AND TIN BASED NANOSTRUCTURED ANODE MATERIALS FOR LITHIUM ION BATTERIES DENG DA ... Lithium Ion Batteries 2.1.2 Developments of Lithium Ion Batteries .11 2.2 Nanostructured Anode Materials 14 2.2.1 Carbonaceous Materials 14 2.2.2 Sn -Based Nanostructured Materials ... PUBLICATIONS .152 V SUMMARY This thesis study is focused on the synthesis of new carbon- and tin- based nanostructured materials for the anode of lithium ion batteries A number of 1D, 3D and...

báo cáo hóa học: " The investigation of frequency response for the magnetic nanoparticulate assembly induced by time-varied magnetic field" ppt

... with the frequency increasing, the magnetic relaxation time of cluster is more and more Page of above the period of external field (The relaxation time is constant while the period of field is the ... respect to the field period was shown in Figure Conclusions In summary, we demonstrated the frequency response of g-Fe2O3 colloidal assembly induced by time-varied magnetic field The higher frequency ... favors the formation of fibrous assemblies The assembly mechanism lies in the difference between the magnetic relaxation time and the Figure Schematic illustration of assembly mechanism based on the...

báo cáo khoa học: " Enhanced relapse prevention for bipolar disorder: a qualitative investigation of value perceived for service users and care coordinators" pdf

... discontinuities of medical and psychological care, inadequate and inappropriate care in crises, and exclusion of carers and families from management decisions [30] ERP provides continuity of care, defines ... Health Behaviour and Health Education: Theory, Research and Practice San Francisco: Wiley and Sons; 2002 May C: A rational model for assessing and evaluating complex interventions in health care ... themes impact on one another and are interrelated Elaborated understanding of Bipolar Disorder This theme refers to the information, understanding, perception, and awareness SUs and CCs have about...

Mathematical modeling of transport phenomena in lithium ion batteries

... taken into account 1.2 MATHEMATICAL MODELING OF LITHIUM- ION BATTERIES 1.2 Mathematical modeling of lithium- ion batteries Mathematical modeling and computational analysis are extensively employed in ... transition metal employed for the positive electrode (1.3) 1.1 OVERVIEW OF LITHIUM- ION BATTERIES Figure 1.2: Schematic of a lithium- ion battery operation principle 1.1 OVERVIEW OF LITHIUM- ION BATTERIES ... OVERVIEW OF LITHIUM- ION BATTERIES 1.1.1 Structure and operation principles of a lithium- ion battery cell A basic lithium- ion battery cell consists of several functional layers: a current collector of...

183
1,652
0

High performance nanostructured phospho olivine cathodes for lithium ion batteries

... in the performance improvement of phospho- olivine cathodes It aims to combine composition and structural modifications rationally to fabricate phospho- olivine cathodes with high energy, high rate ... (nanocrystallite aggregation, encapsulation of phosphoolivine in a porous carbon network) were used complementarily to increase the electrochemical performance of phospho- olivines in high rate and extended ... 40 ° for h; (b) addition of H3PO4 to C 2+ 3+ the (Mn , Fe ) solution under sonication, followed by more h of sonication; (c) addition of H3PO4 to the (Mn2+, Fe3+) solution under sonication for...

Studies on nanostructured metal oxides as prospective anodes for lithium ion batteries

... results in the formation of a non-uniform, lithium alkyl carbonate passivation film on the anode surface, which is a lithium- ion conductor but an electronic insulator Although Liions can pass through ... electronic conductivity (...

Studies on metal oxides and cobalt nitride as prospective anodes for lithium ion batteries

... presents studies on mixed metal oxides and cobalt nitride as prospective anode materials for LIBs based on the Li- recyclability by electrochemical processes such as ‘conversion’ reaction involving ... VI.4.Conclusions 251 References 253 Conclusions and Suggestions for Future Work 256 x Summary Lithium ion batteries (LIBs) are the promising dc- energy source for portable electronic devices such as ... nano-size metals or formation/ decomposition of Limetal alloy Chapter I describes the LIBs, principle of operation, development of LIBs, applications, world market and need for R&D and selection criterion...

Studies on metal oxides as anodes for lithium ion batteries

... Oxide Anodes based on Displacive Redox Reaction 1.9.3.1 Binary transition metal oxides 1.9.3.2 Ternary and complex transition metal oxides 1.9.4 Oxide Anodes based on Reversible Li -metal- oxide Bronze ... 154 Conclusions 156 References 158 Chapter Mixed transition metal oxides as anodes for Li -ion batteries 5.1 Abstract 162 5.2 Introduction 163 5.3 Experimental 165 5.4 Results and Discussion 166 ... presents studies on mixed metal oxides as prospective anodes for LIB based on the principle of Lirecyclability by electrochemical processes such as Li -metal alloy formationdecomposition or displacive...

investigation of effective media for in vitro propagation of stevia rebaudiana bertoni

... alternative way for rapid and mass production of stevia Objective This research, Investigation of effective media for in vitro propagation of Stevia rebaudiana Bertoni , was aimed to find out a complete ... research Investigation of effective media for in vitro propagation of Stevia rebaudiana Bertoni was carried out and successfully obtained the complete process for plant tissue culture of Stevia ... people In this research, in vitro propagation of stevia, was carried out in experiments (callusing, shooting, rooting, and acclimatization) The results supported that MS medium (including vitamins)...

Xem thêm