Sau khi hồn tất việc lắp ráp các thiết ḅ phần cứng cho máy ta tiến hành thực hiện cho máy tính hoạt động.
1- Đưa đĩa mềm khởi động MS-DOS trong đĩa phải cĩ các tập tin FDISK , FORMAT vào ổ A
- Khởi động máy (nhấn nút Power)
- Ấn <Del> vào CMOS. Chọn mục IDE HDD AUTO DECTECTION
Nhấn Enter để vào màn h́nh IDE HDD AUTO DECTECTION . Máy tính seơ tự động dị t́m các thơng số của ổ đĩa.\ Gỏ "Y" để lưu lại \Thốt ra khỏi chương tŕnh CMOS Setup.
2.- Tại dấu nhắc A: goơ Fdisk \ Enter.
A. MENU CHÍNH của TR̀NH FDISK:
- Ngay sau khi chương tŕnh FDISK thi hành, màn h́nh FDISK yêu cầu người sử dụng cĩ chọn hoă trợ các ổ đĩa đối với FAT 32 hay khơng nếu ta cĩ 1 dĩa cứng lớn hơn 512 MB. - Sau khi chọn xong Menu chính của màn h́nh Fdisk như sau:
FDISK Option Current Fixed Disk Drive: 1
Choose one of the following:
1- Creat Dos partition Tạo phân khu DOS
2- Set Active Partition Xác lập phân khu hoạt động
3- Delete Partition or Logical DOS Drive Xĩa phân khu hoặc các ổ Logic 4- Display Partition information Cho hiển tḥ thơng tin t́nh trạng đĩa
5- Select Next Fixed Disk Drive Chọn ổ cứng để Fdisk (nếu ta gắn 2 ổ cứng) Enter choice : [ 1 ] (goơ vào 1-2-3-4 để chọn các chức năng)
Press ESC to exit FDISK (nhấn ECS để thốt khỏi Fdisk) I.- TẠO PHÂN KHU DOS :
Creat Dos partition Current Fixed Disk Drive: 1
1- Creat Primary DOS Partition Tạo phân khu DOS đầu tiên 2- Creat Extended DOS Partition Tạo phân khu DOS mở rộng
3- Creat Logical DOS Drive(s) in the Extended DOS Partition Tạo đĩa DOS lý luận trong khu DOS mở rộng.
Enter choice : [1 ]
Press ESC to return to Fdisk Option Aán <Esc> để thốt khỏi tŕnh FDISK TẠO KHU DOS ĐẦU TIÊN:
Ta nhập số 1 (tại Enter choice : [1]). Trên màn h́nh xuất hiện: Create DOS Partition or Logical DOS Drive Current Fixed Disk Drive:1
Choose one of the following: 1. Create Primary DOS Partition 2. Create Extended DOS Partition
3. Create Logical DOS Drive(s) in the Extended DOS Partition Enter choice: [1 ]
Press ESC to return to FDISK Option
Để thực hiện việc tạo phân khu đầu tiên của ổ đĩa. Ta theo tŕnh tự từ 1 - 3. Khi ta ấn số [1]. Máy seơ hiện:
Create Primary DOS Partition Current Fixed Disk Drive:1
Do you wish to use the maximum available size for a Primary DOS Partition and make the Partition active (Y/N)………? [Y]
Press ESC to return to FDISK Option
Tại đây, nếu ta nhấn "Y" th tồn bộ dung lượng đĩa cứng sé ơ tạo thành một đĩa C và chỉ một, khơng thể chia thêm ổ nào khác được nươa. Để cĩ thể chia thành nhiều ổ, ta phải nhấn "N". Màn h́nh seơ hiện:
Create Primary DOS Partition Current Fixed Disk Drive:1
Total this space is 1219 Mbytes (1Mbytes= 1048567 bytes) Maximum Space availabla for Partition is 1219 Mbytes (100%) Enter Partition size in Mbytes or percent of this space (%) to Create a Primary DOS Partition……… : [1219] No Partition define
Press ESC to return to FDISK Option
Nhập vào ơ dung lượng cho phần Primary (seơ là ổ C:) ví dụ: 500. Và <Enter>.
Hiện ra thơng báo: Primary DOS Partition create: Primary DOS Partition đaơ được tạo. Create Primary DOS Partition
Current Fixed Disk Drive:1
Partition Status Type Volume Label Mbytes Sytem Usage
C: 1 PRI DOS 500 UNKNOW
N 41%
Primary DOS Partition create Press ESC to continue
Nhấn ESC về Menu chính nhưng lúc này cĩ thêm một cảnh báo cho biết đĩa C: (Primary DOS Partition) chưa được Set Active. Haơy khoan chú ý đến cảnh báo đĩ.
FDisk Option Current Fixed Disk Drive:1
Choose one of the following:
1. Creat Dos partition or Logical DOS Drive 2. Set Active Partition
3. Delete Partition or Logical DOS Drive 4.Display Partition information
Enter choice : [1 ]
Warning: No Pratition are set active - disk 1 is not startable unless a Partition is set active.
Từ Menu chính, ta tiếp tục nhấn [1], và <Enter>
Lúc naơy, tại đây ta đaơ đi bước 1 (Create Primary DOS Partition), bây giờ ta vào bước 2 (Creat Extended DOS Partition): nhấn [2], và <Enter>.
Create Extended DOS Partition Current Fixed Disk Drive:1
Partition Status Type Volume Label
Mbytes Sytem Usage
C: 1 PRI
DOS
500 UNKNOWN N
41% Total this space is 1219 Mbytes (1Mbytes= 1048567 bytes)
Maximum Space availabla for Partition is 719 Mbytes (100%) Enter Partition size in Mbytes or percent of this space (%) to Create an Extended DOS Partition……… : [719] Press ESC to return to FDISK option
Tại đây ta <Enter> để lấy hết dung lượng. Màn h́nh seơ ra thơng báo: "Extended DOS Partition create" - Extended DOS Partition đaơ được tạo.
Create Extended DOS Partition Current Fixed Disk Drive:1
Partition Status Type Volume
Label Mbytes Sytem Usage
C: 1 PRI DOS 500 UNKNOWN 41% 2 EXT DOS 719 UNKNOW N 59% Extended DOS Partition create
Press ESC to continue Nhấn ESC
Create Logical DOS Drive(s) in the Extended DOS Partition No Logical drive define
Total Extended DOS Partition size is 719 Mbytes (1Mbytes= 1048567 bytes) Maximum Space availabla for Logical drive is 719 Mbytes (100%)
Press ESC to return to FDISK Option
Tại đây, ta <Enter> seơ ra ổ D:, và màn h́nh như sau:
Create Logical DOS Drive(s) in the Extended DOS Partition Drv Volume Label Mbytes Sytem Usag
e
D 719 UNKNOWN 100%
All Availabale space in the Extended DOS Partition Is assigned to Logical drives
Press ESC to continue
Nhấn ESC trở về Menu chính
Đến đây là kết thúc việc tạo Partititon.
B. SET ACTIVE cho PHÂN KHU CHÍNH:
Lúc này ta vaăn cịn thấy lời cảnh báo "Warning! No Paretition are set active - disk 1 is not startable uinless a Partition is set active" trên màn h́nh v́ sau khi tạo xong các
Partition ta phải tiến hành set active cho Primary Partition. Tại Menu chính ta nhấn [2], và <Enter>; màn h́nh hiện ra:
SET ACTIVE Partition Current Fixed Disk Drive:1
Partition Status Type Volume Label
Mbytes Sytem Usage
C: 1 PRI DOS 500 UNKNOW N 41% 2 EXT DOS 719 UNKNOWN 59%
Total disk space is 1219 Mbytes (1 Mbytes = 1048567 bytes) Enter the number of Partititon you want to make active…………: [ _ ] Press ESC to return to FDISK Option
Goơ số 1 ngay ṿ trí con trỏ, và <Enter>,ta seơ thấy chươ "A" hiện ra dưới cột Status của ổ C:
SET ACTIVE Partition Current Fixed Disk Drive:1
Partition Status Type Volume Label
Mbytes Sytem Usag e C: 1 A PRI
DOS 500 UNKNOWN 41%
2 EXT
DOS 719 UNKNOWN 59%
Total disk space is 1219 Mbytes (1 Mbytes = 1048567 bytes) Enter the number of Partititon you want to make active…………: [ _ ] Press ESC to return to FDISK Option
Nhấn ESC để trở về Menu chính, nhưng lúc này ta khơng cịn thấy lời cảnh cáo nươa. Đến đây là kết thúc quá tŕnh FDISK. Trước khi thốt ra cần kiểm tra lại bằng cách vào mục [4] trong Menu chính.