10. Calculation results display (Result Viewer)
10.2 Calculation results display function
In the simulation execution window select the simulation model for which the results are to be shown, select “Tool” from the menu → “Calculation results display”. The simulation results display window will launch (refer to Fig. 10.1).
Fig. 10.1 Simulation results display window start-up
When it is launched, the ground plan of the basin in the basic window of the calculation results display will be displayed. In this ground plan, the basin used for the calculations and the river course conditions can be displayed. It is also possible to display such things as the hydrograph for a specified site and the fluctuation of the water level for river course cross-section.
【Ground Plan】
【Tank Outline Map】 【Hydrograph】
Fig. 10.2 Display window start-up for tank outline map and hydrograph from ground plan
【River Course Cross-section Water Level】
(1) Ground plan function
The ground plan shows the things selected from the “Essential information” and “Simulation model”
menus located to the left of the screen.
“Essential information” is the basin elevation data that used calculations, as well as the calculation conditions for things such as the parameters. “Simulation model” can display the calculation results for rainfall distribution and tank water level/river course flow volume, and it is possible for the simulation model to add several simulations.
An image of the “Essential information” is shown below.
Pseudo river course basin elevation data Drainage course/ river basin elevation data
※ The pseudo river course cannot be shown as a separate element ※ The drainage course cannot be shown as a separate element
Elevation data Geological classification
Fig. 10.3(1) “Essential Information” display image
Land use Cell type
Tributary basin River course parameters
Aquifer parameters Surface parameters
Fig. 10.3(2) “Essential Information” display image
Dam
Fig. 10.3(3) “Essential Information” display image
Simulation model calculation results will all be saved in text format in the folder below and will be plotted and shown in the ground plan. Figure-10.4 shows the folder in which the results are stored, and an image of the calculation results display is shown in Figure-10.5.
Fig. 10.4 Rainfall and calculation results save location
\IFAS\PROJECTS\PROJECT NAME\SIMU\MODEL NAME\OUT GTANK： Aquifer tank water level
GWIN： Aquifer outflow RTANK： River course tank water level RVIN： River course outflow
RVKOUT： KW River course outflow sample data RVOUT： River course outflow sample data SF2GW： Vertical percolation quantity SFIN： Surface outflow STANK： Surface tank water level
\IFAS\PROJECTS\PROJECTNAME\SIMU\MODELNAME\RAIN RAIN： Amount of rainfall
Rainfall distribution Surface tank water level
Aquifer tank water level Surface tank volume of flow
Aquifer tank volume of flow River course tank volume of flow
Fig. 10.5(1) “Simulation model” display image
Vertical percolation quantity
Fig. 10.5(2) “Simulation model” display image (2) Display configuration
To change the display configuration, launch the Colour Bar from “Essential display” located in the menu and the display change will be performed.
Fig. 10.6 Changing the display configuration
②
①
③
④
⑤
⑥
⑦
⑧
① When the “Condition Clolr” button is clicked the “Color Bar” window will be displayed. Here, the configuration outlined in the explanatory notes for the “Essential information” can be used.
② When a palette section is clicked, the “Color configuration” window will be displayed, and it can be changed to any color.
③ Click a numerical value section to be changed and the value can be changed.
④ If the color or value is changed, click “Set” and the settings will be changed.
⑤ Using “Decimal point”, configuration of the number of digits after the decimal point at a set point can be performed.
⑥ By selecting or deselecting “Grid Line”, the grid lines can be set to display or hide.
⑦ In “Soil/Geology”, explanatory notes for “CGWM” and “UNEP” can be viewed.
⑧ The basic operation of the “Plane display” is the same as the “Basic display” and can perform the display configuration for rainfall distribution and calculation results。
(3) Area zoom/Entire display
Ground plan magnification using “Area Zoom”, and display of the entire ground plan using “Full Scale”, is possible.
Fig. 10.7 Area zoom image (4) Deselecting
In the ground plan, several grids displaying the hydrograph and river course cross section can be selected. To cancel these designated grids, click “Release” (express each grid selection as 9.2.3). In addition, for those deselected, the grids selected in the beginning will remain that way.
Deselection
The grids selected in the beginning will remain
Area selection Zoom In
(5) 3D
When the “3D” button is clicked, it is possible to view the ground plan changed into a three-dimensional state（Only the altitude）.
Fig. 10.8 3D Image
① Up Moves the figure upwards ② Zoom in Magnification Dn Moves the figure downwards Zoom out Reduction Lt Moves the figure left
Rt Moves the figure right
③ Upper Changes the figure's display angle in an upward direction Lower Changes the figure's display angle in a downward direction Left Changes the figure's display angle towards the left
Right Changes the figure's display angle towards the right。
(6) Time control
When “Time Control” is clicked, the time controller will be displayed and the calculation results can be viewed as an animation. Furthermore, for the hydrograph and tank outline map to be displayed on-screen, run them together with the ground plan animation.
Fig. 10.10 Time control image
① ② ③
Animation
(7) Searching for a site
When the “Search Location” button is clicked, the “Search Location” window is displayed and when any latitude or longitude is entered, the prescribed grid above the ground plan can be retrieved.
Fig.10.11 Site search image
① In “Taeget Area”, the value range information for the project currently displayed will be displayed.
② In “Search Location”, enter the site information (latitude/longitude) searched for (for default, the lower left latitude and longitude will be configured).
③ In “Search Location”, enter any value and click “OK”. The cell corresponding to the entered latitude and longitude will be displayed in black (when the “Close” button is clicked, it will return to the state prior to searching).
(8) Simulation summary display
When the simulation model is right clicked, the simulation calculation conditions/used data can be confirmed.
Fig. 10.12 Simulation summary display
②
① ③
Right-click
(9) Flood control display using a dam
From “Essential Information” select “Dam”, and right click the dam site above the ground plan. The
“Dam Control Conditions”, “Result view(time table)”, and “Dam Hydrograph” menus will be displayed.
When each menu is selected, the following type of figures will be displayed.