... designed to control a brush-less DC motor. However, by constructing a feedback loop that can detect the outputs of an induction motor, we can use this motor controller to control an induction ... for a three -phase inductionmotor drive. This induction motor drive is proposed to be incorporated into a “hybrid car” or an “electric car”. 1.2. Available resources • Motor controller ... compatible voltage supply for the motor controller that will be used for this thesis. • Induction motor. Three -phase, 0.5kW, 4-pole machine. This inductionmotor is only used for the prototype...
... SINGLE- PHASEINDUCTION MACHINES 367 Figure 9.8-5. Free-acceleration characteristics of a capacitor-start single- phaseinduction motor. Figure 9.8-4. Average steady-state torque versus speed ... starting to be used in some of these appli-cations, the single- phaseinductionmotor remains in wide use. As we have mentioned, the single- phaseinduction machine cannot develop a start-ing torque. ... two- phase induction machine to be out of phase. To accomplish this the impedances of the stator windings are made unequal. For example, the split -phase machine is a two -phase induction motor...
... closed loop control of a drive system consisting of matrix converterand induction machine. Slip control and field oriented control are the basic methods applied for closed loop control [4]. ... of modern direct controlmethods to thesystem with matrix converter and induction machine.In this paper, the most important direct control methods for matrix converter and induction machine ... basics of Direct Torque Control, Direct Current Control and Sliding Mode Control of matrix converters. I. INTRODUCTIONIn recent years many research results on control methods for matrix converters...
... Craig DC Motor / Tachometer Closed-Loop SpeedControl System 11 The DC motor/ tachometer system has a single input and a single output. The input is the voltage applied across the two motor terminals. ... well-behaved speed- torque characteristics, and adaptability to various types of control methods. DC motors are classified as either integral-horsepower motors (≥ 1 hp) or fractional-horsepower motors ... root-locus domain. Mechatronics Kevin Craig DC Motor / Tachometer Closed-Loop SpeedControl System 24 Mechatronics DC Motor / Tachometer Closed-Loop SpeedControl System 1. Introduction This...
... algorithm inthe MATLAB Neural Network Toolbox. The performance of anopen-loop volts/Hz speed- controlled inductionmotor drive hasbeen evaluated with the ANN-based modulator and comparedwith that ... Silva, and M. P. Kazmierkowski,“A neural network based space vector PWM controller for voltage-fedinverter inductionmotor drive,” IEEE Trans. Ind. Applicat., vol. 36, pp.1628–1636, Nov./Dec. ... 2000.[3] J. O. P. Pinto, B. K. Bose, and L. E. B. da Silva, “A stator flux orientedvector-controlledinduction motor drive with space vector PWM and fluxvector synthesis by neural networks,” IEEE...
... D. Lorenz, Control topologyoptions for single- phase UPS inverters,” IEEE Trans. Ind. Appl., vol. 33,no. 2, pp. 493–501, Mar./Apr. 1997.[16] P. Mattavelli, “An improved deadbeat control for ... Mar. 19–23, 2006, pp. 348–354.[9] C H. Lai and Y Y. Tzou, “DSP-embedded UPS controller for high-performance single- phase on-line UPS systems,” in Proc. 28th IEEEAnnu. Conf. Ind. Electron. Soc., ... 28–38, Spring 2007.[7] P. K. Jain, J. R. Espinoza, and H. Jin, “Performance of a single- stage UPSsystem for single- phase trapezoidal-shaped AC-voltage supplies,” IEEETrans. Power Electron., vol....
... Overview of Gas Springs2 . 21369 . 2007 . 1 Speed Control TM« SPC Gas Springs, cushioned 2486.12.FIBRO SPC Gas Springs Speed Control TM« are designed to reduce or eliminate the ... caused by the increased return travel speed in high speed presses (link drive presses).SPC Gas Springs feature an integral return travel delay which reduces the speed of the gas spring to 0.4 m/s ... 2 . 21370 . 2007 . 1 3 Speed Control TM« SPC Gas Springs, 2486.12. cushionedsubject to alterationsForce in daN at Piston...
... AC INDUCTION MOTORSGenerally, induction motors are categorized based onthe number of stator windings. They are:• Single- phaseinduction motor • Three -phase inductionmotor Single- PhaseInduction ... a single- phase power supply. In all single- phase induction motors, the rotor is the squirrel cage type.The single- phaseinductionmotor is not self-starting.When the motor is connected to a single- phase ... Inc.FIGURE 9: TORQUE -SPEED CURVES OF DIFFERENT TYPES OF SINGLE- PHASE INDUCTION MOTORSTHREE -PHASE AC INDUCTION MOTOR Three -phase AC induction motors are widely used inindustrial and commercial...
... constant-slip control is a torque input control, a speedcontrol is necessary for speed regulation. For the study shown in Figure 13.3-4, the torque command is calcu-lated in accordance with the speedcontrol ... zero speed, when, approximately 250 ms into the study, the mechanical speed command is stepped Figure 13.6-2. Torque control loop.504 INDUCTIONMOTOR DRIVEStaken. Another method of controlling ... described.13.2. VOLTS-PER-HERTZ CONTROL Perhaps the simplest and least expensive inductionmotor drive strategy is constant volt-per-hertz control. This is a speedcontrol strategy that is based...
... 50 mH. The motor is supplied from a singlephase fully controlled converter operating from a 230 V, 50 Hz, singlephase supply with a firing angle of α = 30°. At what speed the motor will supply ... a singlephase fully controlled converter the _________ of an uncontrolled converters are replaced by ____________. ii) In a fully controlled converter the load voltage is controlled by controlling ... speed of the motor and the speed of the motor at the boundary between continuous and discontinuous modes when α = 25°. Answer: At no load the average motor torque and hence the average motor...
... Version 2 EE IIT, Kharagpur 13 The split supply full wave singlephase rectifier offers as good performance as possible from a single phase rectifier in terms of the output voltage form factor ... word(s). i) The output voltage form factor of a singlephase full wave rectifier is ___________. ii) The output voltage of a singlephase full wave rectifier supplying an inductive load ... and Analysis of singlephase uncontrolled rectifiers Instructional Objectives On completion the student will be able to • Classify the rectifiers based on their number of phases and the...
... the step height equal to 25 nm. At a constant speed of 30 µm/s (a), with a dynamic control (b), and with a dynamic control and at a variable speed (c). Figure 2. Comparative line traces for ... Kτ. As a result, the speed of a closed-loop control system (that is, without loss of surface) is determined by the time constant 0 0iG Kτ. Feedback speed, the speed of the actuator, ... dynamic controller on ‘parachuting’ regions. Furthermore, we propose to use variable scan speed on ‘upward step’ regions, with the speed determined by the error signal of the closed-loop control. ...