Thông tin tài liệu
PG-Flex
micro-DLC System
ADC's PG-Flex micro-DLC provides feeder
(F1), distribution (F2) or drop "pair relief" in
areas of the network suffering from copper
pair shortages. It enables Local Exchange
Carriers (LECs) to quickly and cost-effective-
ly meet held order demands for POTS or
ISDN services in these areas. PG-Flex is a far
superior alternative to expensive and time
consuming alternatives of cable rearrange-
ments, laying more cable or installing a large
capacity Digital Loop Carrier (DLC) system.
The PG-Flex micro-DLC is a highly versatile
platform supporting both indoor and out-
door pair relief applications. Remote termi-
nals (RTs), which are deployed in 24-channel
increments, are available in 24, 48 and 96-
channel configurations. Outside plant hard-
ened enclosures include 24/48-channel ver-
sions with complete lightning protection for
installation at crossboxes or existing
DLC/SLC cabinets. Indoor RTs, available in
24/48/96-channel versions, provide a cost-
effective alternative to standard D4 channel
banks. All PG-Flex remotes are line-powered
reducing the need for costly batteries and
UPS systems.
Features:
• Line powered and environmentally
hardened remote terminals
• Requires no local power or
battery supplies
• Traditional HDSL transmission architecture
• 24-channel system architecture
• Extended temperature rating
• Supports POTS and ISDN services
• Supports MLT testing (TR-909)
• Indoor and outdoor specific remotes
• TR-57 (VF) switch interface
• Supports crisis/temporary service needs
1/02 • 100040PR
PG-Flex Subscriber Carrier System
Application
www.adc.com • +1-952-938-8080
2
Figure 1. Basic PG-Flex Configuration
CO
Residential or
Business Customers
Crossbox
PG-Flex RT
Up to 24 Lines
PG-Flex COT
HDSL
Figure 2. Feeder Relief at the Crossbox
CO
Business
Strip Mall
HDSL
HDSL
PG-Flex COT
PG-Flex RT
PG-Flex RT
Figure 3. Relief to end-customer location
1/02 • 100040PR
PG-Flex Subscriber Carrier System
Description
www.adc.com • +1-952-938-8080
3
General Specifications
COT and RT equipment are designed to operate over an extended temperature range. RTs meet the environmental
conditions found in the outside plant. The following specifications apply to all PG-Flex hardware:
Temperature: -40º to +65º C (-40º to +150º F)
Relative Humidity: 5% to 95% (non-condensing)
Altitude: -200 to 13,000 ft (-60 to 4,000 m)
COT Equipment Specifications
COT Shelves Dimensions (HxWxD): FCS-718: 8.75 x 19.0 x 11.75 in (22.2 x 48.3 x 29.9 cm)
FCS-719: 8.75 x 23.0 x 11.75 in (22.2 x 58.4 x 29.9 cm)
Weight: FCS-718: 15.5 lbs (7.0 kg) FCS-719: 20.2 lbs (9.2 kg)
Mounting: EIA hole spacing on universal mounting flanges
Finish: zinc plated and aluminum irridited
Terminations: Subscriber Lines: 25-pair Amphenol or wire wrap
HDSL Lines: wire wrap
Alarm Relays: wire wrap
CO Battery: screw terminal
Metallic Bypass: wire wrap
PGTC Interface: 25-pair Amphenol
System Power Input Voltage: Fused -42 to -56 VDC
Requirements Input Power: 145 watts (maximum)
Line Output Voltage: ±130 VDC (maximum)
Line Output Power: 100 watts (maximum)
POTS Channel Interface Analog Impedance: 900 W
(FLC-703 L4) DC Off-Hook Resistance: 960 W
Ringer Equivalence: 0.9 REN at 20 Hz
Ring Detection at COT: 65 to 104 Vrms @20 to 60 Hz, superimposed on a DC
component of -36 to -56 VDC
ISDN Channel Interface “U” Interface: per ANSI T1.601-1992
RT Equipment Specifications
Ring Output Voltage (At Station): >40 Vrms AC at full load
Generator Output Voltage DC Pedestal: -75 VDC to -40 VDC
Frequency: 20, 25, 30 Hz (±1 Hz) (programmable at system setup and fixed for the entire system)
Crest Factor: 1.2 to 1.6
Output Load: 15 REN maximum per system
RT Power Input Voltage: ±130 VDC to ±70 VDC
Supply Input Power: <40 watts
POTS Analog Impedance: 600 W
DC Loop Current: >23 mA into off-hook DC resistance
Ringer Output Drive: 5 REN maximum per port
RT DC Supervisory Range: 960 W (Max. cable loop resistance, minus 430 W for handset, is 530 W)
RT Idle State Loop Voltage (On-Hook): >40 VDC (Note: ring is negative with respect to Tip)
RT Loop Closure Detection (Off-Hook): RT recognizes resistance between tip and ring £960 W as loop closure
RT On-Hook Detection: The RT recognizes a resistance ³10 kW as an on-hook condition
ISDN “U” Interface: per ANSI T1.601-1992
Wire Gauge
26 AWG
0.4 mm
24 AWG
0.5 mm
22 AWG
0.6 mm
19 AWG
0.9 mm
PG-Flex Distance Table
24-Channel HDSL
9.0 kft
2.7 km
12.3 kft
3.7 km
16.1 kft
4.9 km
22.8 kft
7.0 km
Subscriber Drop
6.3 kft
1.9 km
10.2 kft
3.1 km
16.3 kft
4.9 km
29.4 kft
7.5 km
Web Site: www.adc.com
From North America, Call Toll Free: 1-800-366-3891 • Outside of North America: +1-952-938-8080 Fax: +1-952-946-3292
For a complete listing of ADC's global sales office locations, please refer to our web site.
ADC Telecommunications, Inc., P.O. Box 1101, Minneapolis, Minnesota USA 55440-1101
Specifications published here are current as of the date of publication of this document. Because we are continuously improving our
products, ADC reserves the right to change specifications without prior notice. At any time, you may verify product specifications by
contacting our headquarters office in Minneapolis. ADC Telecommunications, Inc. views its patent portfolio as an important corporate
asset and vigorously enforces its patents. Products or features contained herein may be covered by one or more U.S. or foreign patents.
100040PR 1/02 Revised ©2002 ADC Telecommunications, Inc. All Rights Reserved An Equal Opportunity Employer
RT Equipment Catalog Number Description
Line Units FRL-742 L3C 24-channel RTLU (POTS, LS/GS, ISDN, PGTC)
Channel Units FRC-753 L4C 8-channel LS/GS RTCU (µ-Law, PGTC)
FRC-756 L1A 4-channel ISDN RTCU (PGTC)
FRE-765 FRE-860
FRE-865 FRE-867 FRE-868 FRE-869
Remote Terminals
L4A L1 L1 L1B L1 L1B L1 L2 L3 L4 L1 L2
Mounting: Indoor
••••••
Outdoor
••••••
Wall
• •••••••••
Pole
•••••
Pedestal
•
Rack
•
Subscriber 24 (1 System)
•••• • •
Lines: 48 (2 Systems)
••• •
96 (4 Systems)
••
Subscriber 35’ Gel-filled Stub
••
Terminations 35’ Non-filled Stub
••
Amphenol (male)
••••••
Gel-filled IDC
•
Marconi A-Line
•
HDSL, Bypass, 35’ Gel-filled Stub
••
Auxiliary Power 35’ Non-filled Stub
••
Terminations Amphenol (male)
••
Marconi A-Line
•
AMP Quiet Front
•
Screw Terminal
••••
Subscriber 5-Pin Sockets
•••••
Protection Included in IDC
•
None
••••••
HDSL, Bypass, 5-Pin Sockets
••••• ••
Auxiliary Power AMP Quiet Front
•
Protection None
•• ••
Dimensions Height (in/cm)
19.25/48.9 23.6/59.9 23.6/59.9 23.6/59.9 23.6/60.2 23.6/60.2 22.7/57.8 22.7/57.6 22.7/57.8 22.7/57.6 22.7/57.7 22.7/57.7
Width (in/cm)
14.25/36.2 8.7/22.1 8.7/22.1 8.7/22.1 17.25/43.7 17.25/43.7 11.3/28.6 6.0/15.2 11.3/28.6 6.0/15.2 23.0/58.4 23.0/58.4
Depth (in/cm)
5.93/15.0 6.8/17.3 6.8/17.2 6.8/17.2 6.8/17.2 6.8/17.2 7.25/18.4 7.25/18.4 7.27/18.4 7.25/18.4 7.25/18.4 7.25/18.4
Weight Pounds 26.3 30.0 34.0 34.0 56.0 56.0 25.0 15.0 25.0 15.0 46.0 46.0
Kilograms 11.9 13.6 15.4 15.4 25.4 25.4 11.3 6.8 11.3 6.8 20.9 20.9
RT Configurations
COT Equipment Catalog Number Description
Common Equipment FCS-718 L2B 19" COT shelf (wire wrap, split power, heat deflector)
FCS-718 L4B 19" COT shelf (amphenol, split power, heat deflector)
FCS-719 L2B 23" COT shelf (wire wrap, split power, heat deflector)
FCS-719 L4B 23" COT shelf (amphenol, split power, heat deflector)
FAU-728 L1B alarm unit
FAU-728 L2 alarm unit (composite clock)
FPI-729 L1 PGTC interface unit (composite clock)
Line Units FLL-712 L3C 24-channel COLU (POTS, LS/GS, ISDN, PGTC)
Channel Units FLC-703 L4B 8-channel LS/GS COCU (µ-Law, PGTC)
FLC-706 L1A 4-channel ISDN COCU (PGTC)
Doublers HDU-404 L2 24-channel doubler
HDU-407 L2 24-channel doubler
HDU-409 L2 24-channel doubler
Ordering Information
The table below identifies the different features and capabilities of the PG-Flex Remote Terminals.
. PG-Flex
micro-DLC System
ADC's PG-Flex micro-DLC provides feeder
(F1), distribution (F2) or drop. (±1 Hz) (programmable at system setup and fixed for the entire system)
Crest Factor: 1.2 to 1.6
Output Load: 15 REN maximum per system
RT Power Input Voltage:
Ngày đăng: 17/01/2014, 09:20
Xem thêm: Tài liệu micro-DLC System ppt