nt view Right side view Sensitivity adjuster * 48 Left side view Left side view 37.5 Operation indicator (orange) dia M18 × 26.4 P=1 Receiver Stability indicator (green) Mounting Holes 18.5+0.5 dia Emitter Optical axis Rear view Optical axis Receiver Terminal No Specification +V L/on · D/on selectable 0V Output Front view Optical axis Emitter 5.2 * Suitable models E3FB-T@21-D E3FB-R@22 E3FB-D@2@ E3FB-V@21 E3FB-B@22 Suitable models E3FB-R@21 E3FB-D@2@ E3FB-L@2@ E3FB-V@21 E3FB-B@22 Rear view M12 × P=1 23 29.9 Optical axis Suitable models E3FB-T@21 E3FB-R@22 E3FB-B@21 E3RB series Pre-wired Models E3RB-T@11 E3RB-R@11 E3RB-D@1@ Operation indicator (orange) dia M18 × 26.4 P=1 Receiver Suitable models E3FB-T@11 E3FB-R@12 E3FB-B@11 E3FB series M12 Connector Models E3FB-T@21 E3FB-R@2@ E3FB-D@2@ E3FB-L@2@ E3FB-V@21 E3FB-B@2@ Sensitivity adjuster * 44 37.5 Left side view M18 × 26.4 P=1 14.1 dia 5.2 13 Mounting Holes 35.9 42.8 50.4 56.9 18.5+0.5 dia dia Stability indicator (green) Suitable models E3RB-T@11 E3RB series M12 Connector Models E3RB-T@21 E3RB-R@21 E3RB-D@2@ Suitable models E3RB-R@11 E3RB-D@1@ Rear view Vinyl insulated round cable dia cores (conductor cross sectional area:0.128 mm2 (AWG26) /insulation outside diameter:0.85 dia.) standard length m Rear view Optical axis Receiver 5.2 Sensitivity adjuster Operation indicator (orange) Front view Optical axis Emitter M18 × 26.4 P=1 14.1 dia 5.2 13 Mounting Holes 35.9 42.8 50.4 18.5+0.5 dia 60.9 dia Stability indicator (green) M12 × P=1 Suitable models E3RB-T@21 Suitable models E3RB-R@21 E3RB-D@2@ Sensitivity adjuster Operation indicator (orange) Bottom view Terminal No Specification +V L/on · D/on selectable 0V Output 17 E3FA/E3RA/E3FB/E3RB Attached nut 24 dia Three, 24 M18 Material:POM(for E3FA/E3RA) Nickel-brass(for E3FB/E3RB) P=1 Accessories (Order Separately) Reflectors E39-R1S E39-RP1 34 Two, 3.5 dia 8.5 44 40.3 7.5 0.2 59.9 80 52 72 63.6 Reflector 2.7 1.6 Material, reflective surface: acrylic Rear surface: ABS Mounting brackets E39-L183 Two, 3.5 dia Mounting brackets E39-L182 42 4.3 Two, R15 22 Two, 30° Two, 4.3 37 14.5 12.5 15 1.5 (R16.5) 27 dia 90° 18.2 dia 15.1 36.5 20 18 16.7 dia Terms and Conditions Agreement Read and understand this catalog Please read and understand this catalog before purchasing the products Please consult your OMRON representative if you have any questions or comments Warranties (a) Exclusive Warranty Omron’s exclusive warranty is that the Products will be free from defects in materials and workmanship for a period of twelve months from the date of sale by Omron (or such other period expressed in writing by Omron) Omron disclaims all other warranties, express or implied (b) Limitations OMRON MAKES NO WARRANTY OR REPRESENTATION, EXPRESS OR IMPLIED, ABOUT NON-INFRINGEMENT, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OF THE PRODUCTS BUYER ACKNOWLEDGES THAT IT ALONE HAS DETERMINED THAT THE PRODUCTS WILL SUITABLY MEET THE REQUIREMENTS OF THEIR INTENDED USE Omron further disclaims all warranties and responsibility of any type for claims or expenses based on infringement by the Products or otherwise of any intellectual property right (c) Buyer Remedy Omron’s sole obligation hereunder shall be, at Omron’s election, to (i) replace (in the form originally shipped with Buyer responsible for labor charges for removal or replacement thereof) the non-complying Product, (ii) repair the non-complying Product, or (iii) repay or credit Buyer an amount equal to the purchase price of the non-complying Product; provided that in no event shall Omron be responsible for warranty, repair, indemnity or any other claims or expenses regarding the Products unless Omron’s analysis confirms that the Products were properly handled, stored, installed and maintained and not subject to contamination, abuse, misuse or inappropriate modification Return of any Products by Buyer must be approved in writing by Omron before shipment Omron Companies shall not be liable for the suitability or unsuitability or the results from the use of Products in combination with any electrical or electronic components, circuits, system assemblies or any other materials or substances or environments Any advice, recommendations or information given orally or in writing, are not to be construed as an amendment or addition to the above warranty See http://www.omron.com/global/ or contact your Omron representative for published information Limitation on Liability; Etc OMRON COMPANIES SHALL NOT BE LIABLE FOR SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, LOSS OF PROFITS OR PRODUCTION OR COMMERCIAL LOSS IN ANY WAY CONNECTED WITH THE PRODUCTS, WHETHER SUCH CLAIM IS BASED IN CONTRACT, WARRANTY, NEGLIGENCE OR STRICT LIABILITY Further, in no event shall liability of Omron Companies exceed the individual price of the Product on which liability is asserted Suitability of Use Omron Companies shall not be responsible for conformity with any standards, codes or regulations which apply to the combination of the Product in the Buyer’s application or use of the Product At Buyer’s request, Omron will provide applicable third party certification documents identifying ratings and limitations of use which apply to the Product This information by itself is not sufficient for a complete determination of the suitability of the Product in combination with the end product, machine, system, or other application or use Buyer shall be solely responsible for determining appropriateness of the particular Product with respect to Buyer’s application, product or system Buyer shall take application responsibility in all cases NEVER USE THE PRODUCT FOR AN APPLICATION INVOLVING SERIOUS RISK TO LIFE OR PROPERTY OR IN LARGE QUANTITIES WITHOUT ENSURING THAT THE SYSTEM AS A WHOLE HAS BEEN DESIGNED TO ADDRESS THE RISKS, AND THAT THE OMRON PRODUCT(S) IS PROPERLY RATED AND INSTALLED FOR THE INTENDED USE WITHIN THE OVERALL EQUIPMENT OR SYSTEM Programmable Products Omron Companies shall not be responsible for the user’s programming of a programmable Product, or any consequence thereof Performance Data Data presented in Omron Company websites, catalogs and other materials is provided as a guide for the user in determining suitability and does not constitute a warranty It may represent the result of Omron’s test conditions, and the user must correlate it to actual application requirements Actual performance is subject to the Omron’s Warranty and Limitations of Liability Change in Specifications Product specifications and accessories may be changed at any time based on improvements and other reasons It is our practice to change part numbers when published ratings or features are changed, or when significant construction changes are made However, some specifications of the Product may be changed without any notice When in doubt, special part numbers may be assigned to fix or establish key specifications for your application Please consult with your Omron’s representative at any time to confirm actual specifications of purchased Product Errors and Omissions Information presented by Omron Companies has been checked and is believed to be accurate; however, no responsibility is assumed for clerical, typographical or proofreading errors or omissions ALL DIMENSIONS SHOWN ARE IN MILLIMETERS To convert millimeters into inches, multiply by 0.03937 To convert grams into ounces, multiply by 0.03527 OMRON Corporation Industrial Automation Company Authorized Distributor: Tokyo, JAPAN Contact: www.ia.omron.com Regional Headquarters OMRON EUROPE B.V Sensor Business Unit Carl-Benz-Str 4, D-71154 Nufringen, Germany Tel: (49) 7032-811-0/Fax: (49) 7032-811-199 OMRON ELECTRONICS LLC One Commerce Drive Schaumburg, IL 60173-5302 U.S.A Tel: (1) 847-843-7900/Fax: (1) 847-843-7787 OMRON ASIA PACIFIC PTE LTD No 438A Alexandra Road # 05-05/08 (Lobby 2), Alexandra Technopark, Singapore 119967 Tel: (65) 6835-3011/Fax: (65) 6835-2711 OMRON (CHINA) CO., LTD Room 2211, Bank of China Tower, 200 Yin Cheng Zhong Road, PuDong New Area, Shanghai, 200120, China Tel: (86) 21-5037-2222/Fax: (86) 21-5037-2200 © OMRON Corporation 2012 All Rights Reserved In the interest of product improvement, specifications are subject to change without notice CSM_1_11_0514 Printed in Japan Cat No E424-E1-03 1013(1112) ... D- 711 54 Nufringen, Germany Tel: (49) 7032- 811 -0/Fax: (49) 7032- 811 -19 9 OMRON ELECTRONICS LLC One Commerce Drive Schaumburg, IL 6 017 3-5302 U.S.A Tel: (1) 847-843-7900/Fax: (1) 847-843-7787 OMRON. .. Singapore 11 9967 Tel: (65) 6835-3 011 /Fax: (65) 6835-2 711 OMRON (CHINA) CO., LTD Room 2 211 , Bank of China Tower, 200 Yin Cheng Zhong Road, PuDong New Area, Shanghai, 20 012 0, China Tel: (86) 21- 5037-2222/Fax:.. .E3FA/ E3RA/ E3FB/ E3RB Attached nut 24 dia Three, 24 M18 Material:POM(for E3FA/ E3RA) Nickel-brass(for E3FB/ E3RB) P =1 Accessories (Order Separately) Reflectors E39-R1S E39-RP1 34 Two, 3.5