Ô tô Camry 3.5Q - Phần 1 Phần 1 (Tài liệu bằng tiếng anh) gồm: - Kết cấu thân xe - Kết cấu phần điện - CHASSIS - Kích thước xe - Động cơ xe
BODY – BODY STRUCTUREBO02KBO19Y: Anti-corrosion Sheet SteelBO-11JRUST-RESISTANT BODY1. GeneralRust-resistant performance is enhanced extensively through the use of anti-corrosion sheet steel, as well asby an anti-corrosion treatment that includes the application of anti-rust wax, sealer and anti-chipping paintto easily corroded parts such as the hood and doors.2. Anti-corrosion Sheet SteelAnti-corrosion sheet steel is used as shown in the following illustration." Chinese, Taiwanese, Vietnamese, Philippine, Thai, Indonesian and Malaysian Models A BODY – BODY STRUCTURE02KBO03Y: Anti-corrosion Sheet SteelBO-12" Australian and G.C.C. Countries Models A3. Wax and SealerWax is applied to edge of the hood, door lower portion, door hinge and fuel filler lid hinge to improverust-resistant performance. Sealer is applied to hemmed portions of the hood, door panels and luggage door. BODY – BODY STRUCTUREBO02KBO15Y: Edge Seal: Acrylic Acid Resin Coating: Acrylic Acid Resin Coating (Only for Australian models except S and V grade models)View from Bottom Side: Acrylic Acid Resin Coating (Only for Australian models with 2AZ-FE engines)02KBO11YAARocker MoldingA – A Cross SectionBO-134. Under CoatAcrylic acid resin is applied to under side of the body, inside the rear wheel housing and other parts that aresusceptible to stone chipping damage, thus improving the rust-resistant performance of these areas.5. Anti-chipping ApplicationLarge rocker moldings are fitted to the lower side of the vehicle, which is liable to suffer from stone-chippingin order to ensure chip resistance. . STRUCTUREBO02KBO19Y: Anti-corrosion Sheet SteelBO -1 1 JRUST-RESISTANT BODY1. GeneralRust-resistant performance is enhanced extensively through the use of anti-corrosion. Resin Coating (Only for Australian models with 2AZ-FE engines)02KBO11YAARocker MoldingA – A Cross SectionBO- 13 4 . Under CoatAcrylic acid resin is applied to