ASTM D975 Standard Specification for Diesel Fuel Oils

ASTM D975 Standard Specification for Diesel Fuel OilsASTM D975 Standard Specification for Diesel Fuel OilsASTM D975 Standard Specification for Diesel Fuel OilsASTM D975 Standard Specification for Diesel Fuel OilsASTM D975 Standard Specification for Diesel Fuel OilsASTM D975 Standard Specification for Diesel Fuel OilsASTM D975 Standard Specification for Diesel Fuel OilsASTM D975 Standard Specification for Diesel Fuel OilsASTM D975 Standard Specification for Diesel Fuel OilsASTM D975 Standard Specification for Diesel Fuel OilsASTM D975 Standard Specification for Diesel Fuel OilsASTM D975 Standard Specification for Diesel Fuel OilsASTM D975 Standard Specification for Diesel Fuel OilsASTM D975 Standard Specification for Diesel Fuel OilsASTM D975 Standard Specification for Diesel Fuel OilsASTM D975 Standard Specification for Diesel Fuel OilsASTM D975 Standard Specification for Diesel Fuel OilsASTM D975 Standard Specification for Diesel Fuel OilsASTM D975 Standard Specification for Diesel Fuel OilsASTM D975 Standard Specification for Diesel Fuel Oils

By Authority Of THE UNITED STATES OF AMERICA Legally Binding Document By the Authority Vested By Part 5 of the United States Code § 552(a) and Part 1 of the Code of Regulations § 51 the attached document has been duly INCORPORATED BY REFERENCE and shall be considered legally binding upon all citizens and residents of the United States of America. HEED THIS NOTICE : Criminal penalties may apply for noncompliance. Official Incorporator: T HE EXECUTIVE DIRECTOR OFFICE OF THE FEDERAL REGISTER WASHINGTON, D.C. Document Name: CFR Section(s): Standards Body: e ASTM D975: Standard Specification for Diesel Fuel Oils 40 CFR 1065.701 American Society for Testing and Materials [...]... area of diesel fuel lubricity is ongoing by several organizations, such as the International Organization for Standardization (ISO), the ASTM Diesel Fuel Lubricity Task Force, and the Coordinating Research Council (CRC) Diesel Performance Group These groups include representatives from the fuel injection equipment manufacturers, fuel producers, and additive suppliers The charge of the ASTM task force... low lubricity fuels 8 Mitchell, K., "Diesel Fuel Lubricity-Ba:ie Fuel Effects," SAB Technical Paper 2001-01-1928,2001 II Westbrook, S R., "Survey of Low Sulfur Diesel Fuels and Aviation Keroseoes from U.S Military Installatioos," SAE Technical Paper 952369, 1995 10 Nikanjam, M., "ISO Diesel Fuel Lubricity Round Robin Program," SAE Technical Paper 952372, 1995 1I Nikanjam, M., "Diesel Fuel Lubricity:... - 07 d!illf1 perrect, 2) Both methods in their current form do not apply to all fuel- additive combinations, and 3) The reproducibility values for both test methods are large In order to protect diesel fuel injection equipment, an HFRR WeaI Scar Diameter (WSD) of 520 microns has been placed in Specification D 975.' X4.3.3 Most experts agree that fuels having a SLBOCLE lubricity value below 2000 g might... X5.1.2.5 Fuel system design (Recycle rate, filter location, filter capacity, filter porosity, and so forth.) XS.12.6 Fuel viscosity at low temperatures XS.1.2.7 Equipment add-ons (Engine heaters, radiator covers, fuel line and fuel filter heaters and so forth.) X5.1.2.8 Types of operation (Extensive idling, engine shutdown, or unusual operation) X5.1.2.9 Low temperature flow iroprover additives in fuel. .. the fuel fails to come over in the allotted 60 s The lowest passing temperature is defined as the LTFT for that fuel In 1981, a CRe program was conducted to evaluate the efficacy of cloud point, CFPP, pour point, and LTFT for protecting the diesel vehicle population in North America and to determine what benefit flow-improvers could provide The field test consisted of 3 non-flow improved diesel fuels,... views known to the ASTM Committee on Standards, at the address shown below This standard is copyrighted by ASTM International, 100 Barr Harbor Drive, PO Box c700, West Conshohocken, PA 19428-2959, United States Individual reprints (single or multiple copies) of this standard may be obtained by contacting ASTM at the above address or at 610-832-9585 (phone), 610-832-9555 (tax), or service @astm. org (e-mail);... vehicle low temperature operability limits for diesel fuel No independent data has been published in recent years to determine test applicability for today's fuels and vehicles predicts the performance of all fuels in all vehicles (5) CFPP was a better predictor than pour point, but both methods over-predicted, minimum operating temperarures in many vehicles For this reason, these tests were judged XS.2 Maps... degrees of predictive capability, and offered distinctively different advantages Both predicted the performance of the base fuels well, but LTFf more accurately predicted the performance of the flow-improved fuels On the other hand, cloud point came closest to a fall-safe predictor of vehicle performance for all vehicles 16 11 SAE 962197, SAE 982576, SAE 2000-01-2883 0975-07 ND MT ·27C ·24C SD -24C 'IVY... such rights, are entirely their own responsibilily This standard is subject to revision at any time by 'the responsible technical committee and must be reviewed evel}' five years and if not revised, either reapproved orwilhdrawn Your comments are invited either for revision of this standard or for additional standards and should be addressed to ASTM International Headquarters Your comments will receive... flow improved diesel fuels, 4 light-duty passenger cars and 3 heavy-duty trucks The field trial resulted in two documents 14, 15 that provide insight into correlating laboratory tests to North 12 "Low Temperature Operability of Diesels A Report by CEC Investigation Group IGF-3," CEC P-171~82 13 "SFPP-A New Laboratory Test for Assessment of Low Temperature Operability of Modern Diesel Fuels," CECI93IEF . Petroleum Products ) For referenced ASTM standards, visit the ASTM website, www .astm. org, or contact ASTM Customer Service at service @astm. org. For Annual Book of ASTM Standards volume information,. of ASTM Committee D02 on Petroleum Products and Lubricants and is the direct responsibility of Subcommittee D02.EO.02 on Diesel Fuel Oils. Current edition approved Feb. 1, 2007. . OF THE FEDERAL REGISTER WASHINGTON, D.C. Document Name: CFR Section(s): Standards Body: e ASTM D975: Standard Specification for Diesel Fuel Oils 40 CFR 1065.701 American Society for Testing