19.4 Fourier and Cyclic Reduction Methods 857 Sample page from NUMERICAL RECIPESIN C: THE ART OF SCIENTIFIC COMPUTING (ISBN 0-521-43108-5) Copyright (C) 1988-1992 by Cambridge University Press.Programs Copyright (C) 1988-1992 by Numerical Recipes Software. Permission is granted for internet users to make one paper copy for their own personal use. Further reproduction, or any copying of machine- readable files (including this one) to any servercomputer, is strictly prohibited. To order Numerical Recipes books,diskettes, or CDROMs visit website http://www.nr.com or call 1-800-872-7423 (North America only),or send email to trade@cup.cam.ac.uk (outside North America). For example, a combined advective-diffusion equation, such as ∂u ∂t = −v ∂u ∂x + D ∂ 2 u ∂x 2 (19.3.21) might profitably use an explicit scheme for the advective term combined with a Crank-Nicholson or other implicit scheme for the diffusion term. The alternating-direction implicit (ADI) method, equation (19.3.16), is an example of operator splitting with a slightly different twist. Let us reinterpret (19.3.19) to have a different meaning: Let U 1 now denote an updating method that includes algebraically all the pieces of the total operator L, but which is desirably stable only for the L 1 piece; likewise U 2 , U m . Then a method of getting from u n to u n+1 is u n+1/m = U 1 (u n , ∆t/m) u n+2/m = U 2 (u n+1/m , ∆t/m) ··· u n+1 = U m (u n+(m−1)/m , ∆t/m) (19.3.22) The timestep for each fractional step in(19.3.22) is nowonly 1/m of thefulltimestep, because each partial operation acts with all the terms of the original operator. Equation(19.3.22) is usually,thoughnotalways, stable as a differencingscheme for the operator L. In fact, as a rule of thumb, it is often sufficient to have stable U i ’s only for the operator pieces having the highest number of spatial derivatives — the other U i ’s can be unstable — to make the overall scheme stable! It is at this point that we turn our attention from initial value problems to boundary value problems. These will occupy us for the remainder of the chapter. CITED REFERENCES AND FURTHER READING: Ames, W.F. 1977, Numerical Methods for Partial Differential Equations , 2nd ed. (New York: Academic Press). 19.4 Fourier and Cyclic Reduction Methods for Boundary Value Problems As discussed in §19.0, most boundary value problems (elliptic equations, for example) reduce to solving large sparse linear systems of the form A · u = b (19.4.1) either once, for boundary value equations that are linear, or iteratively,for boundary value equations that are nonlinear. 858 Chapter 19. Partial Differential Equations Sample page from NUMERICAL RECIPESIN C: THE ART OF SCIENTIFIC COMPUTING (ISBN 0-521-43108-5) Copyright (C) 1988-1992 by Cambridge University Press.Programs Copyright (C) 1988-1992 by Numerical Recipes Software. Permission is granted for internet users to make one paper copy for their own personal use. Further reproduction, or any copying of machine- readable files (including this one) to any servercomputer, is strictly prohibited. To order Numerical Recipes books,diskettes, or CDROMs visit website http://www.nr.com or call 1-800-872-7423 (North America only),or send email to trade@cup.cam.ac.uk (outside North America). Two important techniques lead to “rapid” solution of equation (19.4.1) when the sparse matrix is of certain frequently occurring forms. The Fourier transform method is directly applicable when the equations have coefficients that are constant in space. The cyclic reduction method is somewhat more general; its applicability is related to the question of whether the equations are separable (in the sense of “separation of variables”). Both methods require the boundaries to coincide with the coordinate lines. Finally, for some problems, there is a powerful combination of these two methods called FACR (Fourier Analysis and Cyclic Reduction).We now consider each method in turn, using equation (19.0.3), with finite-difference representation (19.0.6), as a model example. Generally speaking, the methods in this section are faster, when they apply, than the simpler relaxation methods discussed in §19.5; but they are not necessarily faster than the more complicated multigrid methods discussed in §19.6. Fourier Transform Method The discrete inverse Fourier transform in both x and y is u jl = 1 JL J−1 m=0 L−1 n=0 u mn e −2πijm/J e −2πiln/L (19.4.2) This can be computed using the FFT independently in each dimension, or else all at once via the routine fourn of §12.4 or the routine rlft3 of §12.5. Similarly, ρ jl = 1 JL J−1 m=0 L−1 n=0 ρ mn e −2πijm/J e −2πiln/L (19.4.3) If we substitute expressions (19.4.2) and (19.4.3) in our model problem (19.0.6), we find u mn e 2πim/J + e −2πim/J + e 2πin/L + e −2πin/L − 4 = ρ mn ∆ 2 (19.4.4) or u mn = ρ mn ∆ 2 2 cos 2πm J +cos 2πn L − 2 (19.4.5) Thus the strategy for solving equation (19.0.6) by FFT techniques is: • Compute ρ mn as the Fourier transform ρ mn = J−1 j=0 L−1 l=0 ρ jl e 2πimj/J e 2πinl/L (19.4.6) • Compute u mn from equation (19.4.5). 19.4 Fourier and Cyclic Reduction Methods 859 Sample page from NUMERICAL RECIPESIN C: THE ART OF SCIENTIFIC COMPUTING (ISBN 0-521-43108-5) Copyright (C) 1988-1992 by Cambridge University Press.Programs Copyright (C) 1988-1992 by Numerical Recipes Software. Permission is granted for internet users to make one paper copy for their own personal use. Further reproduction, or any copying of machine- readable files (including this one) to any servercomputer, is strictly prohibited. To order Numerical Recipes books,diskettes, or CDROMs visit website http://www.nr.com or call 1-800-872-7423 (North America only),or send email to trade@cup.cam.ac.uk (outside North America). • Compute u jl by the inverse Fourier transform (19.4.2). The above procedure is valid for periodic boundary conditions. In other words, the solution satisfies u jl = u j+J,l = u j,l+L (19.4.7) NextconsideraDirichlet boundaryconditionu =0on the rectangular boundary. Instead of the expansion (19.4.2), we now need an expansion in sine waves: u jl = 2 J 2 L J−1 m=1 L−1 n=1 u mn sin πjm J sin πln L (19.4.8) This satisfies the boundary conditions that u =0at j =0,J and at l =0,L.Ifwe substitute this expansion and the analogous one for ρ jl into equation (19.0.6), we find that the solution procedure parallels that for periodic boundary conditions: • Compute ρ mn by the sine transform ρ mn = J−1 j=1 L−1 l=1 ρ jl sin πjm J sin πln L (19.4.9) (A fast sine transform algorithm was given in §12.3.) • Compute u mn from the expression analogous to (19.4.5), u mn = ∆ 2 ρ mn 2 cos πm J +cos πn L − 2 (19.4.10) • Compute u jl by the inverse sine transform (19.4.8). If we have inhomogeneous boundary conditions, for example u =0on all boundaries except u = f(y) on the boundary x = J∆, we have to add to the above solution a solution u H of the homogeneous equation ∂ 2 u ∂x 2 + ∂ 2 u ∂y 2 =0 (19.4.11) that satisfies the required boundary conditions. In the continuum case, this would be an expression of the form u H = n A n sinh nπx J∆ sin nπy L∆ (19.4.12) where A n would be found by requiring that u = f(y) at x = J∆. In the discrete case, we have u H jl = 2 L L−1 n=1 A n sinh πnj J sin πnl L (19.4.13) 860 Chapter 19. Partial Differential Equations Sample page from NUMERICAL RECIPESIN C: THE ART OF SCIENTIFIC COMPUTING (ISBN 0-521-43108-5) Copyright (C) 1988-1992 by Cambridge University Press.Programs Copyright (C) 1988-1992 by Numerical Recipes Software. Permission is granted for internet users to make one paper copy for their own personal use. Further reproduction, or any copying of machine- readable files (including this one) to any servercomputer, is strictly prohibited. To order Numerical Recipes books,diskettes, or CDROMs visit website http://www.nr.com or call 1-800-872-7423 (North America only),or send email to trade@cup.cam.ac.uk (outside North America). If f(y = l∆) ≡ f l ,thenwegetA n from the inverse formula A n = 1 sinh πn L−1 l=1 f l sin πnl L (19.4.14) The complete solution to the problem is u = u jl + u H jl (19.4.15) By adding appropriate terms of the form (19.4.12), we can handle inhomogeneous terms on any boundary surface. A much simpler procedure for handling inhomogeneous terms is to note that whenever boundary terms appear on the left-hand side of (19.0.6), they can be taken over to the right-hand side since they are known. The effective source term is therefore ρ jl plus a contribution from the boundary terms. To implement this idea formally, write the solution as u = u + u B (19.4.16) where u =0on the boundary, while u B vanishes everywhere except on the boundary. There it takes on the given boundary value. In the above example, the only nonzero values of u B would be u B J,l = f l (19.4.17) The model equation (19.0.3) becomes ∇ 2 u = −∇ 2 u B + ρ (19.4.18) or, in finite-difference form, u j+1,l + u j−1,l + u j,l+1 + u j,l−1 − 4u j,l = − (u B j+1,l + u B j−1,l + u B j,l+1 + u B j,l−1 − 4u B j,l )+∆ 2 ρ j,l (19.4.19) All the u B terms in equation (19.4.19) vanish except when the equation is evaluated at j = J − 1,where u J,l + u J −2,l + u J−1,l+1 + u J−1,l−1 − 4u J−1,l = −f l +∆ 2 ρ J−1,l (19.4.20) Thus the problem is now equivalent to the case of zero boundary conditions, except that one row of the source term is modified by the replacement ∆ 2 ρ J−1,l → ∆ 2 ρ J−1,l − f l (19.4.21) The case of Neumann boundary conditions ∇u =0is handled by the cosine expansion (12.3.17): u jl = 2 J 2 L J m=0 L n=0 u mn cos πjm J cos πln L (19.4.22) 19.4 Fourier and Cyclic Reduction Methods 861 Sample page from NUMERICAL RECIPESIN C: THE ART OF SCIENTIFIC COMPUTING (ISBN 0-521-43108-5) Copyright (C) 1988-1992 by Cambridge University Press.Programs Copyright (C) 1988-1992 by Numerical Recipes Software. Permission is granted for internet users to make one paper copy for their own personal use. Further reproduction, or any copying of machine- readable files (including this one) to any servercomputer, is strictly prohibited. To order Numerical Recipes books,diskettes, or CDROMs visit website http://www.nr.com or call 1-800-872-7423 (North America only),or send email to trade@cup.cam.ac.uk (outside North America). Here the double prime notation means that the terms for m =0and m = J should be multiplied by 1 2 , and similarly for n =0and n = L. Inhomogeneous terms ∇u = g can be again included by adding a suitable solution of the homogeneous equation, or more simply by taking boundary terms over to the right-hand side. For example, the condition ∂u ∂x = g(y) at x =0 (19.4.23) becomes u 1,l − u −1,l 2∆ = g l (19.4.24) where g l ≡ g(y = l∆). Once again we write the solution in the form (19.4.16), where now ∇u =0on the boundary. This time ∇u B takes on the prescribed value on the boundary, but u B vanishes everywhere except just outside the boundary. Thus equation (19.4.24) gives u B −1,l = −2∆g l (19.4.25) All the u B terms in equation (19.4.19) vanish except when j =0: u 1,l + u −1,l + u 0,l+1 + u 0,l−1 − 4u 0,l =2∆g l +∆ 2 ρ 0,l (19.4.26) Thus u is the solution of a zero-gradient problem, with the source term modified by the replacement ∆ 2 ρ 0,l → ∆ 2 ρ 0,l +2∆g l (19.4.27) Sometimes Neumann boundary conditions are handled by using a staggered grid, with the u’s defined midway between zone boundaries so that first derivatives are centered on the mesh points. You can solve such problems using similar techniques to those described above if you use the alternative form of the cosine transform, equation (12.3.23). Cyclic Reduction Evidently the FFT method works only when the original PDE has constant coefficients, and boundaries that coincide with the coordinate lines. An alternative algorithm, which can be used on somewhat more general equations, is called cyclic reduction (CR). We illustrate cyclic reduction on the equation ∂ 2 u ∂x 2 + ∂ 2 u ∂y 2 + b(y) ∂u ∂y + c(y)u = g(x, y)(19.4.28) This form arises very often in practice from the Helmholtz or Poisson equations in polar, cylindrical, or spherical coordinate systems. More general separable equations are treated in [1] . 862 Chapter 19. Partial Differential Equations Sample page from NUMERICAL RECIPESIN C: THE ART OF SCIENTIFIC COMPUTING (ISBN 0-521-43108-5) Copyright (C) 1988-1992 by Cambridge University Press.Programs Copyright (C) 1988-1992 by Numerical Recipes Software. Permission is granted for internet users to make one paper copy for their own personal use. Further reproduction, or any copying of machine- readable files (including this one) to any servercomputer, is strictly prohibited. To order Numerical Recipes books,diskettes, or CDROMs visit website http://www.nr.com or call 1-800-872-7423 (North America only),or send email to trade@cup.cam.ac.uk (outside North America). The finite-difference form of equation (19.4.28) can be written as a set of vector equations u j−1 + T · u j + u j+1 = g j ∆ 2 (19.4.29) Here the indexj comes fromdifferencing in the x-direction,whilethe y-differencing (denoted by the index l previously) has been left in vector form. The matrix T has the form T = B − 21 (19.4.30) where the21 comes fromthe x-differencingand the matrixB fromthe y-differencing. The matrix B, and hence T, is tridiagonal with variable coefficients. The CR method is derived by writing down three successive equations like (19.4.29): u j−2 + T · u j−1 + u j = g j−1 ∆ 2 u j−1 + T · u j + u j+1 = g j ∆ 2 u j + T · u j+1 + u j+2 = g j+1 ∆ 2 (19.4.31) Matrix-multiplyingthe middle equation by −T and then adding the three equations, we get u j−2 + T (1) · u j + u j+2 = g (1) j ∆ 2 (19.4.32) This is an equation of the same form as (19.4.29), with T (1) =21−T 2 g (1) j =∆ 2 (g j−1 −T·g j +g j+1 ) (19.4.33) After one level of CR, we have reduced the number of equations by a factor of two. Since the resulting equations are of the same form as the original equation, we can repeat the process. Taking the number of mesh points to be a power of 2 for simplicity, we finally end up with a single equation for the central line of variables: T (f) · u J/2 =∆ 2 g (f) J/2 − u 0 − u J (19.4.34) Here we have moved u 0 and u J to the right-hand side because they are known boundary values. Equation (19.4.34) can be solved for u J/2 by the standard tridiagonal algorithm. The two equations at level f − 1 involve u J/4 and u 3J/4 .The equation for u J/4 involves u 0 and u J/2 , both of which are known, and hence can be solved by the usual tridiagonal routine. A similar result holds true at every stage, so we end up solving J − 1 tridiagonal systems. In practice, equations (19.4.33) should be rewritten to avoid numerical instabil- ity. For these and other practical details, refer to [2] . 19.5 Relaxation Methods for Boundary Value Problems 863 Sample page from NUMERICAL RECIPESIN C: THE ART OF SCIENTIFIC COMPUTING (ISBN 0-521-43108-5) Copyright (C) 1988-1992 by Cambridge University Press.Programs Copyright (C) 1988-1992 by Numerical Recipes Software. Permission is granted for internet users to make one paper copy for their own personal use. Further reproduction, or any copying of machine- readable files (including this one) to any servercomputer, is strictly prohibited. To order Numerical Recipes books,diskettes, or CDROMs visit website http://www.nr.com or call 1-800-872-7423 (North America only),or send email to trade@cup.cam.ac.uk (outside North America). FACR Method The best way to solve equations of the form (19.4.28), including the constant coefficientproblem(19.0.3),isacombinationofFourieranalysisandcyclicreduction, the FACR method [3-6] .Ifattherth stage of CR we Fourier analyze the equations of the form (19.4.32) along y, that is, with respect to the suppressed vector index, we will have a tridiagonal system in the x-direction for each y-Fourier mode: u k j−2 r + λ (r) k u k j + u k j+2 r =∆ 2 g (r)k j (19.4.35) Here λ (r) k is the eigenvalue of T (r) corresponding to the kth Fourier mode. For the equation (19.0.3), equation (19.4.5) shows that λ (r) k will involve terms like cos(2πk/L) − 2 raised to a power. Solve the tridiagonal systems for u k j at the levels j =2 r ,2×2 r ,4×2 r , , J − 2 r . Fourier synthesize to get the y-values on these x-lines. Then fill in the intermediate x-lines as in the original CR algorithm. The trick is to choose the number of levels of CR so as to minimize the total number of arithmetic operations. One can show that for a typical case of a 128×128 mesh, the optimal level is r =2; asymptotically, r → log 2 (log 2 J). A rough estimate of running times for these algorithms for equation (19.0.3) is as follows: The FFT method (in both x and y) and the CR method are roughly comparable. FACR with r =0(that is, FFT in one dimension and solve the tridiagonal equations by the usual algorithm in the other dimension) gives about a factor of two gain in speed. The optimal FACR with r =2gives another factor of two gain in speed. CITED REFERENCES AND FURTHER READING: Swartzrauber, P.N. 1977, SIAM Review , vol. 19, pp. 490–501. [1] Buzbee, B.L, Golub, G.H., and Nielson, C.W. 1970, SIAM Journal on Numerical Analysis ,vol.7, pp. 627–656; see also op. cit. vol. 11, pp. 753–763. [2] Hockney, R.W. 1965, Journal of the Association for Computing Machinery , vol. 12, pp. 95–113. [3] Hockney, R.W. 1970, in Methods of Computational Physics , vol. 9 (New York: Academic Press), pp. 135–211. [4] Hockney, R.W., and Eastwood, J.W. 1981, Computer Simulation Using Particles (New York: McGraw-Hill), Chapter 6. [5] Temperton, C. 1980, Journal of Computational Physics , vol. 34, pp. 314–329. [6] 19.5 Relaxation Methods for Boundary Value Problems As we mentioned in §19.0, relaxation methods involve splitting the sparse matrix that arises from finite differencing and then iterating untila solution is found. There is another way of thinking about relaxation methods that is somewhat more physical. Suppose we wish to solve the elliptic equation Lu = ρ (19.5.1) . are linear, or iteratively,for boundary value equations that are nonlinear. 858 Chapter 19. Partial Differential Equations Sample page from NUMERICAL RECIPES IN C: THE ART OF SCIENTIFIC COMPUTING. separable (in the sense of “separation of variables”). Both methods require the boundaries to coincide with the coordinate lines. Finally, for some problems, there is a powerful combination of. have u H jl = 2 L L−1 n=1 A n sinh πnj J sin πnl L (19.4.13) 860 Chapter 19. Partial Differential Equations Sample page from NUMERICAL RECIPES IN C: THE ART OF SCIENTIFIC COMPUTING (ISBN 0-521-43108-5) Copyright