Buch e indb 1 Wine Potentiometric Analysis Collection WINE PAC 6 6043 003 Methods for the titrimetric / potentiometric analysis of wine [ Dear Users, You have purchased a Metrohm titrator which, with[.]
Wine Potentiometric Analysis Collection WINE PAC 6.6043.003 Methods for the titrimetric / potentiometric analysis of wine [ Dear Users, You have purchased a Metrohm titrator which, with its collection of methods, is specially custom-made to meet your particular requirements Metrohm always tries to provide the customer with as wide a range of application support as possible so that the day-to-day analytical work is made easier In the Application File you will find the descriptions of the corresponding analytical methods, together with all the necessary remarks and explanations and – very important for you – printouts of the instrument parameters and examples of curves All these methods are loaded on the Method Memory Card You only need to «feed» the titrator with the card, load the required method into the working memory and off you go!!! You are the specialists in wine production and have to ensure the outstanding quality of this wonderful drink when it is sold to your customers Although we at Metrohm not understand much about your profession, we have been ion analysis specialists for many years The combination of these two elements – and we are convinced of this – will produce optimal results For Titrando users: A conversion program ensures that you can adopt the Titrino parameters in your Titrando without any problems This conversion program is contained in the PC Control program We wish you pleasure and success in your work, Your Metrohm 8.110.1793 A few additional hints The methods presented here have been drawn up by taking the relevant methods of the individual countries into consideration (see literature references) These are methods from the EU, Australia, Israel, Switzerland, South Africa, South America and the USA All methods have been worked out so that you can use them as so-called SOPs (Standard Operating Procedures) in your laboratory Of course, almost all these methods can be further automated In the appendix you will find a relevant example For details please contact your local Metrohm distributor, who can also be found on the Internet under: www.metrohm.com Distributors The supplied method memory card can be used with the following Titrinos: 798, 799, 785 and 751 (from program version 20) With VESUV 3.0 Light, which is also supplied (VESUV = Verification Support for Validation), either you or your Metrohm agency can also transfer the parameter sets to the following Titrinos: 716, 736, 794 or 751 (