1. Trang chủ
  2. » Luận Văn - Báo Cáo

A proposal for designing a FTTH triplexer using a ring resonator integrated with a directional coupl...

1 1 0

Đang tải... (xem toàn văn)

THÔNG TIN TÀI LIỆU

Nội dung

A PROPOSAL FOR DESIGNING A FTTH TRIPLEXER USING A RING RESONATOR INTEGRATED WITH A DIRECTIONAL COUPLER BASED ON SILICON WAVEGUIDES MỘT ĐỀ XUẤT THIẾT KẾ BỘ GHÉP KÊNH BA BƯỚC SÓNG CHO FTTH SỬ DỤNG ỐNG D[.]

A PROPOSAL FOR DESIGNING A FTTH TRIPLEXER USING A RING RESONATOR INTEGRATED WITH A DIRECTIONAL COUPLER BASED ON SILICON WAVEGUIDES MỘT ĐỀ XUẤT THIẾT KẾ BỘ GHÉP KÊNH BA BƯỚC SÓNG CHO FTTH SỬ DỤNG ỐNG DẪN SÓNG CỘNG HƯỞNG VÀ MỘT BỘ GHÉP ĐỊNH HƯỚNG Author: Phan Tran Dang Khoa Danang University of Science and Technology, The University of Danang; ptdkhoa@dut.udn.vn Abstract: A novel ultracompact FTTH triplexer has been designed by utilizing a ring resonator and a directional coupler based on submicron silicon on insulator (silica) waveguides First, the ring resonator waveguide was designed to separate the wavelength 1490 nm by resonating and allowing two wavelength of 1310 nm and 1550 nm to pass through A directional coupler was utilized for separating the wavelengths of 1310 nm and 1550 nm into two distinguish outputs The total length of the present triplexer was short - only about 81 µm Numerical simulations were implemented with a three-dimensional Beam Propagation Method (BPM) and a Finite Differential Time Domain (FDTD) for designing and optimizing the operation of the whole triplexer Results showed good optical performances and the proposed triplexer was suitable for FTTH applications Key words: Triplexer; Ring resonator; Directional coupler; Silicon on insulator (SOI); Waveguide Tóm tắt: Một thiết bị ghép kênh ba bước sóng cho ứng dụng cáp quang đến tận nhà - FTTH thiết kế cách sử dụng cộng hưởng ghép định hướng dựa ống dẫn sóng silic (Si) thủy tinh silic (SiO2) Đầu tiên, ống dẫn sóng cộng hưởng dạng vòng tròn thiết kế để tách biệt bước sóng 1490 nm cộng hưởng cho phép hai bước sóng 1310 nm 1550 nm truyền qua Bộ ghép định hướng sau sử dụng để tách riêng hai bước sóng 1310 nm 1550 nm hai cổng riêng biệt Tổng chiều dài cấu kiện ngắn khoảng 81 µm Mô số dựa sử dụng hai phương pháp BPM FDTD cho thiết kế tối ưu hóa hoạt động tồn triplexer Các kết mơ cho thấy hiệu quang học tốt thiết bị triplexer đề xuất phù hợp cho ứng dụng cáp quang đến tận nhà FTTH Từ khóa: Bộ ghép ba bước sóng Triplexer; Bộ cộng hưởng vòng; Bộ ghép định hướng; Silicon thủy tinh silic; Ống dẫn sóng

Ngày đăng: 20/04/2023, 19:04

TÀI LIỆU CÙNG NGƯỜI DÙNG

TÀI LIỆU LIÊN QUAN