IEC TS 60870 5 604 Edition 2 0 201 6 06 TECHNICAL SPECIFICATION Telecontrol equipment and systems – Part 5 604 Conformance test cases for the IEC 60870 5 1 04 companion standard IE C T S 6 0 8 7 0 5 6[.]
I EC TS 60870-5-604 ® Edition 2.0 201 6-06 TE CH N I CAL SPE CI FI CATI ON colour i n si de Tel econ trol eq u i pm en t an d system s – IEC TS 60870-5-604:201 6-06(en) Part 5-604: Co n form an ce test cases fo r th e I EC 60870-5-1 04 com pan i on stan d ard TH I S P U B L I C ATI O N I S C O P YR I G H T P R O TE C TE D C o p yri g h t © I E C , G e n e va , Sw i t z e rl a n d All rights reserved Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either IEC or IEC's member National Committee in the country of the requester If you have any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or your local IEC member National Committee for further information IEC Central Office 3, rue de Varembé CH-1 21 Geneva 20 Switzerland Tel.: +41 22 91 02 1 Fax: +41 22 91 03 00 info@iec.ch www.iec.ch Abo u t th e I E C The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes International Standards for all electrical, electronic and related technologies Ab o u t I E C p u b l i c a t i o n s The technical content of IEC publications is kept under constant review by the IEC Please make sure that you have the latest edition, a corrigenda or an amendment might have been published I EC C atal og u e - webstore i ec ch /catal o g u e E l ectro ped i a - www el ectro ped i a org The stand-alone application for consulting the entire bibliographical information on IEC International Standards, Technical Specifications, Technical Reports and other documents Available for PC, Mac OS, Android Tablets and iPad The world's leading online dictionary of electronic and electrical terms containing 20 000 terms and definitions in English and French, with equivalent terms in additional languages Also known as the International Electrotechnical Vocabulary (IEV) online I EC pu bl i cati on s search - www i ec ch /search pu b I E C G l o ssary - s td i ec ch /g l ossary The advanced search enables to find IEC publications by a variety of criteria (reference number, text, technical committee,…) It also gives information on projects, replaced and withdrawn publications 65 000 electrotechnical terminology entries in English and French extracted from the Terms and Definitions clause of IEC publications issued since 2002 Some entries have been collected from earlier publications of IEC TC 37, 77, 86 and CISPR I EC J u st Pu bl i s h ed - webstore i ec ch /j u stp u bl i s h ed Stay up to date on all new IEC publications Just Published details all new publications released Available online and also once a month by email I E C Cu s to m er S ervi ce Cen tre - webstore i ec ch /csc If you wish to give us your feedback on this publication or need further assistance, please contact the Customer Service Centre: csc@iec.ch I EC TS 60870-5-604 ® Edition 2.0 201 6-06 TECH N I CAL SPE CI FI CATI ON colour i n si de Tel eco n trol eq u i pm en t an d system s – Part 5-604: Con form an ce test cases for th e I E C 60870-5-1 04 com pan i on stan d ard INTERNATIONAL ELECTROTECHNICAL COMMISSION ICS 33.200 ISBN 978-2-8322-3425-9 Warn i n g ! M ake su re th at you obtai n ed th i s pu bl i cati on from an au th ori zed d i stri bu tor ® Registered trademark of the International Electrotechnical Commission –2– I EC TS 60870-5-604:201 © I EC 201 CONTENTS FOREWORD I N TRODU CTI ON Scope N ormati ve references Terms an d defin i tions Abbreviated terms Con formance testi ng for I EC 60870-5-1 04 Overvi ew and leg en d Con fig u rati on parameters I EC 60870-5-1 04 Veri fication of I EC 60870-5-1 04 comm un ication Con formance test procedu res 51 5 Test resul ts ch art 88 Test resul ts of com man d transm ission 95 General 95 Test resu l ts of sin gl e com mand transm ission 96 Test resu l ts of dou bl e com mand transm ission 99 Test resu l ts of reg u lati ng step com mand transmission 02 Test resu l ts of setpoin t comm and transm ission 05 Fi gu re – Test procedure Table – Ru n the Con formance Test Procedu res for each of the followin g supported fi g uration parameter valu es Table – Tests on transport provi der level (1 of 5) 1 Table – Tests on data u ni t iden ti fi er Table – Verification of ASDU s for process in formation in monitor (n ormal) direction (1 of 8) Table – Verification of ASDU s for process information in trol (n ormal) directi on (1 of 8) 35 Table – Verification of ASDU s for system i nform ation in moni tor (normal) directi on 43 Table – Verification of ASDU s for system i nform ation in control (normal) directi on (1 of 3) 43 Table – Verification of ASDU s for parameters in control (normal) direction (1 of 2) 46 Table – Verification of ASDU s for fi le transfer (in monitor (normal) and trol directi on) (1 of 4) 48 Table – Data u n it identifier form ance test procedu res (1 of 2) 52 Table 1 – I n form ati on object address formance test procedu res 53 Table – Station i ni tial isati on fu nction formance test procedu res (1 of 3) 54 Table – Redu n dan t link formance test procedu res (1 of 3) 57 Table – Cyclic data transm ission fu ncti on conformance test procedu res 60 Table – Data acqu isiti on throug h read fu nction formance test procedu res 61 Table – Acqu isi tion of events fu nction conformance test procedu res 62 Table – General in terrog ation function form ance test procedu res (1 of 5) 63 Table – Clock synchron isation function formance test procedu res 68 I EC TS 60870-5-604:201 © I EC 201 –3– Table – Comm and transm ission fu ncti on formance test procedu res (1 of 9) 69 Table 20 – Transm ission of in tegrated totals (telecou n ting ) fu nction form ance test procedures (1 of 4) 77 Table 21 – Param eter loading functi on formance test procedu res 81 Table 22 – Test procedure fu nction formance test procedu res 82 Table 23 – Fil e transfer procedu re fu nction conformance test procedu res (1 of 3) 83 Table 24 – Additional formance test procedu res 86 Table 25 – N egative form ance test procedu res 87 Table 26 – PI XI T rel ated formance test procedu res 88 Table 27 – Test resu l ts ch art (1 of 7) 89 Table 28 – Test resu l ts of sing le comm and transm ission (1 of 3) 96 Table 29 – Test resu l ts of dou ble command transm ission (1 of 3) 99 Table 30 – Test resu l ts of regu latin g step com man d transm ission (1 of 3) 02 Table 31 – Test resu l ts of setpoint com mand transm ission (1 of 2) 05 –4– I EC TS 60870-5-604:201 © I EC 201 I NTERNATI ONAL ELECTROTECHN I CAL COMMI SSI ON TELECONTROL EQUIPMENT AND SYSTEMS – Part 5-604: Conformance test cases for the IEC 60870-5-1 04 companion standard FOREWORD ) Th e I n tern ati on al El ectrotech n i cal Com m i ssi on (I EC) i s a worl d wi d e org an i zati on for stan d ard i zati on com pri si n g al l n ati on al el ectrotech n i cal com m i ttees (I EC N ati on al Com m i ttees) Th e obj ect of I E C i s to prom ote i n tern ati on al co-operati on on al l q u esti on s cern i n g stan dard i zati on i n th e el ectri cal an d el ectron i c fi el ds To th i s en d an d i n ad di ti on to oth er acti vi ti es, I EC pu bl i sh es I n tern ati on al Stan d ards, Tech n i cal Speci fi cati on s, Tech n i cal Reports, Pu bl i cl y Avai l abl e Speci fi cati on s (PAS) an d G u i d es (h ereafter referred to as “I EC Pu bl i cati on (s) ”) Th ei r preparati on i s en tru sted to tech n i cal com m i ttees; an y I EC N ati on al Com m i ttee i n terested i n th e su bj ect d eal t wi th m ay parti ci pate i n th i s preparatory work I n tern ati on al , g overn m en tal an d n on g overn m en tal org an i zati on s l i si n g wi th th e I EC al so parti ci pate i n th i s preparati on I EC col l aborates cl osel y wi th th e I n tern ati on al Org an i zati on for Stan d ard i zati on (I SO) i n accordan ce wi th d i ti on s d eterm i n ed by ag reem en t between th e two org an i zati on s 2) Th e form al d eci si on s or ag reem en ts of I EC on tech n i cal m atters express, as n earl y as possi bl e, an i n tern ati on al sen su s of opi n i on on th e rel evan t su bj ects si n ce each tech n i cal com m i ttee h as represen tati on from al l i n terested I EC N ati on al Com m i ttees 3) I EC Pu bl i cati on s h ave th e form of recom m en d ati on s for i n tern ati on al u se an d are accepted by I EC N ati on al Com m i ttees i n th at sen se Wh i l e al l reason abl e efforts are m ad e to en su re th at th e tech n i cal ten t of I EC Pu bl i cati on s i s accu rate, I EC can n ot be h el d respon si bl e for th e way i n wh i ch th ey are u sed or for an y m i si n terpretati on by an y en d u ser 4) I n ord er to prom ote i n tern ati on al u n i form i ty, I EC N ati on al Com m i ttees u n d ertake to appl y I EC Pu bl i cati on s tran sparen tl y to th e m axi m u m exten t possi bl e i n th ei r n ati on al an d reg i on al pu bl i cati on s An y d i verg en ce between an y I EC Pu bl i cati on an d th e correspon d i n g n ati on al or reg i on al pu bl i cati on sh al l be cl earl y i n di cated i n th e l atter 5) I EC i tsel f d oes n ot provi d e an y attestati on of form i ty I n d epen d en t certi fi cati on bodi es provi d e form i ty assessm en t servi ces an d , i n som e areas, access to I EC m arks of form i ty I EC i s n ot respon si bl e for an y servi ces carri ed ou t by i n d epen d en t certi fi cati on bodi es 6) Al l u sers sh ou l d en su re th at th ey h ave th e l atest edi ti on of th i s pu bl i cati on 7) N o l i abi l i ty sh al l attach to I E C or i ts di rectors, em pl oyees, servan ts or ag en ts i n cl u di n g i n d i vi du al experts an d m em bers of i ts tech n i cal com m i ttees an d I EC N ati on al Com m i ttees for an y person al i n j u ry, property d am ag e or oth er d am ag e of an y n atu re wh atsoever, wh eth er di rect or i n d i rect, or for costs (i n cl u d i n g l eg al fees) an d expen ses ari si n g ou t of th e pu bl i cati on , u se of, or rel i an ce u pon , th i s I EC Pu bl i cati on or an y oth er I EC Pu bl i cati on s 8) Atten ti on i s d rawn to th e N orm ati ve referen ces ci ted i n th i s pu bl i cati on U se of th e referen ced pu bl i cati on s i s i n di spen sabl e for th e correct appl i cati on of th i s pu bl i cati on 9) Atten ti on i s d rawn to th e possi bi l i ty th at som e of th e el em en ts of th i s I EC Pu bl i cati on m ay be th e su bj ect of paten t ri g h ts I EC sh al l n ot be h el d respon si bl e for i d en ti fyi n g an y or al l su ch paten t ri g h ts The m ain task of I EC tech n ical comm i ttees is to prepare I n ternational Stan dards I n exception al circu mstances, a technical com mittee m ay propose the publ ication of a technical specification wh en • • th e requ ired su pport can not be obtain ed for the publ ication of an I nternation al Standard, despite repeated efforts, or th e subject is sti l l u nder techn ical developm en t or where, for an y other reason, there is the fu tu re bu t no im mediate possibi li ty of an ag reement on an I n ternation al Stan dard Tech nical speci fications are su bject to review wi th in three years of pu bl ication to decide wh ether they can be transform ed in to I n tern ational Standards I EC 60870-5-604, wh ich is a technical speci fication , h as been prepared by I EC techn ical comm i ttee 57: Power systems m anag em en t and associ ated in form ation exch ang e I EC TS 60870-5-604:201 © I EC 201 –5– Th is second edition cancels and replaces th e first edi tion pu blished i n 2007 This edi ti on consti tu tes a technical revisi on Th is edi tion i ncludes the fol lowin g sig ni fican t tech nical chang es with respect to the previou s edi tion : a) Resolu ti on of ambig u i ties between I EC 60870-5-1 04:2006 and I EC TS 60870-5-604:201 (together with I EC 60870-5-1 04/AMD1 ) ; b) Refin em en t of some test cases to enh ance operability between tested devi ces; c) Additional test cases (main l y neg ative test cases) added The text of th is techn ical specification is based on the followin g docu ments: En q u i ry d raft Report on voti n g 57/1 61 4/DTS 57/1 683/RVC Fu ll in formati on on the votin g for th e approval of th is tech nical specification can be fou nd in th e report on voting indicated in th e above table Th is pu blication has been drafted in accordance wi th the I SO/I EC Directi ves, Part A list of all parts of I EC 60870 series, pu blished u nder the gen eral titl e Telecontrol equipment and systems, can be fou n d on the I EC websi te The com mi ttee h as decided that th e ten ts of th is pu blicati on wi l l remain unchan ged u ntil th e stabil ity date in dicated on th e I EC websi te u nder "h ttp://webstore iec ch " in the data related to the speci fic pu blication At th is date, the publ ication will be • transformed i n to an I n tern ati onal stan dard, • recon firmed, • wi thdrawn , • replaced by a revised edi ti on, or • amended A bi lingu al versi on of th is pu blication m ay be issu ed at a later date IMPORTANT – The 'colour inside' log o on the cover page of this publication indicates that it contains colours which are considered to be useful for the correct understanding of its contents Users should therefore print this document using a colour printer –6– I EC TS 60870-5-604:201 © I EC 201 I NTRODUCTI ON Th is part of I EC 60870, which is a technical speci ficati on , describes test cases for formance testing of tel econtrol equ ipment or systems usin g the I EC 60870-5-1 04 companion standard and I EC 60870-5-6, Guidelines for conformance testing for the IEC 60870-5 companion standards I EC TS 60870-5-604:201 © I EC 201 –7– TELECONTROL EQUIPMENT AND SYSTEMS – Part 5-604: Conformance test cases for the IEC 60870-5-1 04 companion standard Scope Th is part of I EC 60870, which is a technical speci ficati on , describes test cases for formance testi ng of telecon trol equ ipmen t, Su bstation Au tomation Systems (SAS) an d telecon trol systems, inclu din g front-end fu nctions of SCADA, u sin g th e I EC 60870-5-1 04 compan ion standard and I EC 60870-5-6, Guidelines for conformance testing for the IEC 60870-5 companion standards The u se of this part of I EC 60870 facili tates in teroperabil ity by provi ding a standard m eth od of testin g protocol i mplementations, bu t i t does not g u aran tee i n teroperability of devices I t is expected th at u sin g this specification du ring testin g will m in im ize th e ri sk of non in teroperability The g oal of th is part of I EC 60870 is to en able un ambi gu ous an d standardised evalu ation of I EC 60870-5 com pan ion standard protocol i mplemen tations Th e g u idelines and diti ons for th e testing en vironment are described in I EC 60870-5-6 Th e detai led test cases per companion standard, taini ng among others m an datory an d opti onal m andatory test cases per Basic Appl ication Fu nction , ASDU and transm ission procedu re, wi ll become avail able as a techn ical specification Other fu nctionali ty may n eed addi tion al test cases bu t this is ou tside th e scope of this part of I EC 60870 For proper testing , it is recom mended to define these addi tional test cases Th is docu men t is such a Tech nical Speci fication for the m en tioned compan ion standard Th is part of I EC 60870 deals mai nl y wi th com mu n ication conformance testing ; therefore other requ iremen ts, such as safety or EM C are n ot covered These requ irem ents are covered by other stan dards (i f appl icabl e) and the proof of compl iance for these topics is done according to these stan dards Normative references The following docu men ts, in wh ole or in part, are n orm ati vel y referenced in this docu m en t and are indispensabl e for i ts application For dated references, on ly the edition cited appli es For u ndated references, th e latest edition of th e referenced docu men t (inclu din g an y amendm ents) appl ies I EC 60870-5-4:1 993, Telecontrol equipment and systems – Part 5: Transmission protocols – Section 4: Definition and coding of application information elements I EC 60870-5-5:1 995, Telecontrol equipment and systems – Part 5: Transmission protocols – Section 5: Basic application functions _ Th e base stan d ard al ways takes preced en ce I n case of am bi g u i ty between th i s tech n i cal speci fi cati on an d th e base stan dards (I EC 60870-5-1 to I EC 60870-5-5, I EC 60870-5-1 04) , th i s part of I EC 60870 n eeds to be cl ari fi ed or am en d ed Wh en testi n g , n eg ati ve beh avi ou r i s n ot descri bed i n th e base stan d ard , th e beh avi ou r d escri bed i n th i s d ocu m en t prevai l s an d sh ou l d be observed Th e form an ce statem en t prod u ced after testi n g i n d i cates an y l ack of form an ce to ei th er th e test pl an or th e base stan dard –8– I EC TS 60870-5-604:201 © I EC 201 I EC 60870-5-6:2006, Telecontrol equipment and systems – Part 5-6: Guidelines for conformance testing for the IEC 60870-5 companion standards I EC 60870-5-1 01 :2003, Telecontrol equipment and systems – Part 5-101 : Transmission protocols – Companion standard for basic telecontrol tasks I EC 60870-5-1 04:2006, Telecontrol equipment and systems – Part 5-104: Transmission protocols – Network access for IEC 60870-5-101 using standard transport profiles I ETF RFC2200, Internet Official Protocol Standards Terms and definitions For th e pu rposes of th is docu men t, th e terms and defini ti ons g i ven i n I EC 60870-5-6 appl y Abbreviated terms For th e pu rposes of th is docu men t, th e abbreviati ons g iven in I EC 60870-5-6 apply Conformance testing for IEC 60870-5-1 04 5.1 Overview and legend An overview of tests is gi ven in Tables to 26 Procedu ral and fu ncti onal testin g shall always start with th e Station I ni tialisati on fu nction and proceeds wi th the next Basic Appl ication Fu nctions Th e procedure in each test case shall be followed, which means that th e DU T is abl e to fu ncti on as described in th e speci fic test case The test procedu res in Tables th rou gh 1 shal l be carried ou t wi th no errors detected du ri ng testing of al l the Basic Application Fu nctions in Tables throug h 26 Th ese tests are preferabl y au tom atical ly performed by th e used test pl atform I n addi tion to the perform ance criteria l isted in th e test procedu res, lists th e protocol specifications that shall be verifi ed au tom aticall y by the testin g software or verifi ed m an uall y by revi ew of the test history log after execu tion of the test procedures The verificati on shall resu l t in no errors detected du ri ng the com pl ete test procedu re Th is test plan h as a direct reference to th e PI CS and possibl y a PI XI T With ou t a reference to a PI CS or PI XI T this test plan is obsolete Test case nu mbering syntax is su bclause n u mber + tabl e nu m ber + test case nu mber Test cases are mandatory dependi ng on the description in the colu mn ‘Requ ired’ The fol lowing si tu ations are possibl e: M = M an datory test case reg ardless if enabled in th e PI CS/PI XI T, not only i n one situation bu t du ring execu tion of al l th e tests as in the PI CS and/or PI XI T PI CS, x x = M an datory test case i f th e fu nctional i ty is en abled i n the PI CS (by marking the applicable ch eck box) , with a reference to the section nu mber of the PI CS (x x) ; N OTE PI CS x al ways refers to 60870-5-1 04: 2006, Cl au se PI XI T = Man datory test case i f th e function al ity is enabl ed/described in the PI XI T Veri fication of th ese test cases by the u ser/owner of th e PI XI T is requ ired before th e test is started (6 of 7) Cl ock syn ch ron i sati on fu n cti on Com m an d tran sm i ssi on fu n cti on 5.4.1 9.50 5.4.1 9.60 Tran sm i ssi on of i n teg rated total s (tel ecou n ti n g ) fu n cti on Param eter l oadi n g fu n cti on 5.4.1 9.75 5.4.1 9.80 5.4.1 9.85 5.4.1 9.86 5.4.1 9.90 5.4.20.1 5.4.20.1 5.4.20.20 5.4.20.30 5.4.20.40 5.4.21 5.4.21 5.4.21 5.4.21 20 I EC TS 60870-5-604:201 © I EC 201 5.4.1 9.70 Cl ock synch roni sati on –sequ enti al procedu re Cl ock synch roni sati on – Chang e th e cl ock Cl ock synch roni sati on – Broadcast Compati bi l i ty Wi th Oth er Test Cases Sel ect and Execu te Sel ect and Deacti vati on Di rect Execu te Sel ect with Neg ati ve Confi rmati on by Con trol l ed stati on (Abort) Sel ect with Neg ati ve Execu te Confi rmati on by Control l ed stati on i f Execute i s recei ved after confi g u red delay i n th e control l i ng stati on Di rect Execu te wi th Neg ati ve Confi rmati on by Control l ed stati on Command transmi ssi on wi th network del ay su pervi si on – seq uenti al procedu re: Command recei ved WITHIN confi g u red del ay Command transmi ssi on wi th network del ay su pervi si on – seq uenti al procedu re: Command recei ved AFTER confi g u red del ay Command transmi ssi on – Command recei ved wi th ti me tag i n th e fu ture Test for al l supported ASDU ’ s Command transmi ssi on – Commands wi th or wi th ou t ti me tag Command transmi ssi on – Command recei ved du ri ng GI Compati bi l i ty Wi th Oth er Test Cases Mode A – Local freeze with spontaneous transmi ssi on Mode B – Local freeze with Counter I nterrog ati on Mode C – Remote i ni ti ated freeze wi th Cou nter Interrog ati on Mode D – Remote i ni ti ated freeze wi th spontaneous transmi ssi on Compati bi l i ty Wi th Oth er Test Cases Load and acti vate parameter Load and acti vate parameter with Neg ati ve Confi rmati on by Control l ed stati on Parameter activati on Compati bi l i ty Wi th Oth er Test Cases – 94 – 5.4.1 8.1 5.4.1 8.1 5.4.1 8.1 5.4.1 8.20 5.4.1 9.1 5.4.1 9.1 5.4.1 9.20 5.4.1 9.30 5.4.1 9.40 th e Test Proced u re PASSED for th at fi g u rati on val u e Test Proced u re fai l ed for at l east on e of th e Test Cases th at fi g u rati on val u e i s n ot su pported by th e d evi ce th e Test Proced u re was n ot perform ed (Th ere sh ou l d be n o em pty boxes wh en testi n g i s com pl ete) Reversed Di recti on i n di cates i n di cates i n di cates i n di cates Di recti on N orm al Di recti on √ FAI L N A Em pty Stati on Type Con trol l ed stati on test (Sl ave) Record th e conformance test procedu re resu l t for each of th e su pported confi g u rati on parameter val ues on th e ri g ht Con trol l i n g stati on test (M aster) Table 27 (7 of 7) Test proced u re fu n cti on Fi l e tran sfer procedu re fu n cti on N eg ati ve Con form an ce Test Proced u res PI XI T rel ated Con form an ce Test Proced u res 5.6 5.6.1 5.4.22.1 5.4.22.1 5.4.23.1 5.4.23.1 5.4.23.1 5.4.23.20 5.4.24.1 5.4.24.1 5.4.24.20 5.4.24.30 5.4.1 5.1 5.4.25.50 Test procedure – sequ ential procedu re Compati bi l i ty Wi th Oth er Test Cases Fi l e transfer procedure (moni tor di recti on) – seq uenti al procedure Fi l e transfer procedu re (control di recti on) – sequ enti al procedu re Fi l e transfer procedu re – Qu ery l og Compati bi l i ty Wi th Oth er Test Cases Ou t of servi ce behavi our Mi scell aneou s Ti me i n val i d Compati bi l i ty Wi th Oth er Test Cases Neg ati ve tests Compati bi l i ty Wi th Oth er Test Cases 5.4.26.1 5.4.26.50 5.4.26.1 00 Fu ncti on: Fu ncti on: Fu ncti on: Test results of command transmission General Tables 28 to 31 provi de an example of the detailed resu lts requ i red by the test procedu res specified in Table Reversed Di recti on th e Test Proced u re PASSED for th at fi g u rati on val u e Test Proced u re fai l ed for at l east on e of th e Test Cases th at fi g u rati on val u e i s n ot su pported by th e d evi ce th e Test Proced u re was n ot perform ed (Th ere sh ou l d be n o em pty boxes wh en testi n g i s com pl ete) – 95 – Ad d i ti on al Con form an ce Test Proced u res i n di cates i n di cates i n di cates i n di cates Di recti on N orm al Di recti on √ FAI L N A Em pty Stati on Type Con trol l i n g stati on test (M aster) Con trol l ed stati on test (Sl ave) Record th e conformance test procedu re resu l t for each of th e su pported confi g u rati on parameter val ues on th e ri g ht I EC TS 60870-5-604:201 © I EC 201 Table 27 5.6.2 Test results of single command transmission Table 28 – Test results of single command transmission (1 of 3) ACTCON pos=Positi ve Activati on Confi rm ati on Test resu l ts of th e Si n g l e com m an d (SCO) √ i n di cates th e Test Procedure PASSED for th at confi gu rati on val u e ACTCON n eg =N eg ative Acti vati on Confi rm ati on FAI L i n di cates Test Procedu re fai l ed for at l east on e of th e Test Cases DEACTCON pos=Deacti vation Con fi rm ation posi tive N A i n di cates th at fi g u rati on val u e is n ot su pported by th e devi ce ACTTERM=Acti vati on Term i n ati on Em pty i n di cates th e Test Procedure was n ot perform ed (Th ere sh ou l d be n o em pty boxes wh en testi n g i s com pl ete) I f ACTTERM is stated i n row ‘m essag e from th e RTU ’, ACTCON pos wi th S/E=0 execu te h as been recei ved before Detai l ed i nform ati on on encl osu res per Com m an d type I n th e case of a S+E com man d al so ACTCON pos wi th S/E=1 sel ect h as been recei ved before th e ACT wi th S/E=0! Th e datal i n k servi ces are n ot sh own i n th e detai l s, on l y th e com m an d ASDU s N OTE Th i s tabl e sh ows th e on l y correct beh avi ou r Oth er beh avi ou r m ean s th e test fai l ed ! Each I OA coul d be confi g u red S/E or on ly E S+E on /off = Sel ect an d Execu te com m an d on /off E on/off = Di rect Execu te com m an d on/off ASDU type = 45 S+E on S+E off S+D on S+D off E on Eoff ACTTERM pos ACTTERM pos DEACTCON pos DE ACTCON pos ACTTERM pos ACTTERM pos E E S or E S or E E E Yes, H M I Yes, H M I No No Yes, H M I Yes, H M I I f avai l abl e I f avai l abl e No No I f avai l abl e I f avai l abl e PI CS, 9 PI CS, 9 PI CS, 9 PI CS, 9 PI CS, 9 PI CS, 9 – 96 – S+D = Sel ect an d Deactivate comm an d on /off QU =0 (n o ad d d ef ) Sh own beh avi ou r after Sel ect/E xecu te Statu s ch an g e RTU Statu s ch an g e process Req u i red Resu l t Log fi l e avai l abl e (Y/N ) ? I EC TS 60870-5-604:201 © I EC 201 M essag e from RTU ASDU type = 45 (2 of 3) S+E off S+D on S+D off Eon Eoff ACTTERM pos ACTTERM pos DE ACTCON pos DEACTCON pos ACTTERM pos ACTTERM pos E E S or E S or E E Yes, H M I Yes, H M I No No Yes, H M I Yes, H M I I f avai l abl e I f avai l abl e No No I f avai l abl e I f avai l abl e PI CS, 9 PI CS, 9 PI CS, 9 PI CS, 9 PI CS, 9 PI CS, 9 S+E on S+E off S+D on S+D off Eon Eoff ACTTERM pos ACTTERM pos DE ACTCON pos DEACTCON pos ACTTERM pos ACTTERM pos E E S or E S or E E E Yes, H M I Yes, H M I No No Yes, H M I Yes, H M I I f avai l abl e I f avai l abl e No No I f avai l abl e I f avai l abl e PI CS, 9 PI CS, 9 PI CS, 9 PI CS, 9 PI CS, 9 PI CS, 9 QU =1 (sh ort pu l se) M essag e from RTU Sh own beh avi ou r after Sel ect/Execu te Statu s ch an g e RTU Statu s ch an g e Process Req u i red E Resu l t Log fi l e avai l abl e (Y/N ) ? ASDU type = 45 QU =2 (l on g pu l se) M essag e from RTU Sh own beh avi ou r after Sel ect/Execu te Statu s ch an g e RTU Statu s ch an g e process Req u i red Resu l t Log fi l e avai l abl e (Y/N ) ? – 97 – S+E on I EC TS 60870-5-604:201 © I EC 201 Table 28 Table 28 ASDU type = 45 (3 of 3) S+E on S+E off S+D on S+D off E on Eoff ACTTERM pos ACTTERM pos DEACTCON pos DEACTCON pos ACTTERM pos ACTTERM pos E E S or E S or E E E Yes, H M I Yes, H M I No No Yes, H M I Yes, H M I I f avai l abl e I f avai l abl e No No I f avai l abl e I f avai l abl e PI CS, 9 PI CS, 9 PI CS, 9 PI CS, 9 PI CS, 9 PI CS, 9 QU =3 (persi sten t) M essag e from RTU Sh own beh avi ou r after Sel ect/Execu te Statu s ch an g e RTU Statu s ch an g e process Req u i red Resu l t Log fi l e avai l abl e (Y/N ) ? – 98 – G en eral rem arks I EC TS 60870-5-604:201 © I EC 201 Test results of double command transmission Table 29 – Test results of double command transmission (1 of 3) ACTCON pos=Posi ti ve Acti vati on Con fi rm ati on Test resu l ts of th e Dou bl e com m an d (DCO) √ i n di cates th e Test Proced u re PASSED for th at fi g u rati on val u e ACTCON n eg =N eg ati ve Acti vati on Con fi rm ati on FAI L i n di cates Test Proced u re fai l ed for at l east on e of th e Test Cases DEACTCON pos=Deacti vati on Con fi rm ati on posi ti ve N A i n di cates th at fi g u rati on val u e i s n ot su pported by th e d evi ce ACTTERM =Acti vati on Term i n ati on Em pty i n di cates th e Test Proced u re was n ot perform ed (Th ere sh ou l d be n o em pty boxes wh en testi n g i s com pl ete) I f ACTTERM i s stated i n row ‘m essag e from th e RTU ’ , ACTCON pos wi th S/E=0 execu te h as been recei ved before Detai l ed i n form ati on on en cl osu res per Com m an d type I n th e case of a S+E com m an d al so ACTCON pos wi th S/E=1 sel ect h as been recei ved before th e ACT wi th S/E=0 ! Th e d atal i n k servi ces are n ot sh own i n th e d etai l s, on l y th e com m an d ASDU s N OTE Th i s tabl e sh ows th e on l y correct beh avi ou r Oth er beh avi ou r m ean s th e test fai l ed ! Each I OA cou l d be fi g u red S/E or on l y E S+E on /off = Sel ect an d Execu te com m an d on /off I EC TS 60870-5-604:201 © I EC 201 5.6.3 S+D = Sel ect an d Deacti vate com m an d on /off ASDU type = 46 S+E on S+E off S+D on S+D off Eon Eoff ACTTERM pos ACTTERM pos DE ACTCON pos DEACTCON pos ACTTERM pos ACTTERM pos E E S or E S or E E E Yes, H M I Yes, H M I No No Yes, H M I Yes, H M I I f avai l abl e I f avai l abl e No No I f avai l abl e I f avai l abl e PI CS, 9 PI CS, 9 PI CS, 9 PI CS, 9 PI CS, 9 PI CS, 9 QU =0 (n o ad d d ef ) M essag e from RTU Sh own beh avi ou r after Sel ect/Execu te Statu s ch an g e RTU Statu s ch an g e process Req u i red Resu l t Log fi l e avai l abl e (Y/N ) ? – 99 – E on /off = Di rect Execu te com m an d on /off Table 29 ASDU type = 46 (2 of 3) S+E on S+E off S+D on S+D off Eon Eoff ACTTERM pos ACTTERM pos DEACTCON pos DEACTCON pos ACTTERM pos ACTTERM pos E E S or E S or E E E Yes, H M I Yes, H M I No No Yes, H M I Yes, H M I I f avai l abl e I f avai l abl e No No I f avai l abl e I f avai l abl e PI CS, 9 PI CS, 9 PI CS, 9 PI CS, 9 PI CS, 9 PI CS, 9 S+E on S+E off S+D on S+D off Eon Eoff ACTTERM pos ACTTERM pos DEACTCON pos DEACTCON pos ACTTERM pos ACTTERM pos E E S or E S or E E E Yes, H M I Yes, H M I No No Yes, H M I Yes, H M I I f avai l abl e I f avai l abl e No No I f avai l abl e I f avai l abl e PI CS, 9 PI CS, 9 PI CS, 9 PI CS, 9 PI CS, 9 PI CS, 9 QU=1 (short pulse) M essag e from RTU Sh own beh avi ou r after Sel ect/Execu te Statu s ch an g e RTU Statu s ch an g e process Req u i red Result Log fi l e avai l abl e (Y/N ) ? QU=2 (long pulse) M essag e from RTU Statu s ch an g e RTU Statu s ch an g e process Req u i red Resu l t Log fi l e avai l abl e (Y/N ) ? I EC TS 60870-5-604:201 © I EC 201 Sh own beh avi ou r after Sel ect/Execu te – 00 – ASDU type = 46 ASDU type = 46 (3 of 3) S+E on S+E off S+D on S+D off E on Eoff ACTTERM pos ACTTERM pos DEACTCON pos DEACTCON pos ACTTERM pos ACTTERM pos E E S or E S or E E E Yes, H M I Yes, H M I No No Yes, H M I Yes, H M I I f avai l abl e I f avai l abl e No No I f avai l abl e I f avai l abl e PI CS, 9 PI CS, 9 PI CS, 9 PI CS, 9 PI CS, 9 PI CS, 9 QU =3 (persi sten t) M essag e from RTU Sh own beh avi ou r after Sel ect/Execu te Statu s ch an g e RTU Statu s ch an g e process Req u i red Resu l t Log fi l e avai l abl e (Y/N ) ? – 01 – G en eral rem arks: I EC TS 60870-5-604:201 © I EC 201 Table 29 5.6.4 Test results of regulating step command transmission Table 30 – Test results of regulating step command transmission (1 of 3) ACTCON pos=Posi ti ve Acti vati on Con fi rm ati on Test resu l ts of th e Reg u l ati n g step com m an d (RCO) √ i n di cates th e Test Proced u re PASSED for th at fi g u rati on val u e ACTCON n eg =N eg ati ve Acti vati on Con fi rm ati on FAI L i n di cates Test Proced u re fai l ed for at l east on e of th e Test Cases DEACTCON pos=Deacti vati on Con fi rm ati on posi ti ve N A i n di cates th at fi g u rati on val u e i s n ot su pported by th e d evi ce ACTTERM =Acti vati on Term i n ati on Em pty i n di cates th e Test Proced u re was n ot perform ed (Th ere sh ou l d be n o em pty boxes wh en testi n g i s com pl ete) I f ACTTERM i s stated i n row ‘ m essag e from th e RTU ’ , ACTCON pos wi th S/E=0 execu te h as been recei ved before Detai l ed i n form ati on on en cl osu res per Com m an d type I n th e case of a S+E com m an d al so ACTCON pos wi th S/E=1 sel ect h as been recei ved before th e ACT wi th S/E=0! Th e d atal i n k servi ces are n ot sh own i n th e d etai l s, on l y th e com m an d ASDU s N OTE Th i s tabl e sh ows th e on l y correct beh avi ou r Oth er beh avi ou r m ean s th e test fai l ed ! Each I OA cou l d be fi g u red S/E or on l y E S+E on /off = Sel ect an d Execu te com m an d on /off S+D = Sel ect an d Deacti vate com m an d on /off ASDU type = 47 S+E d own S+D u p S+D down E up E d own ACTTERM pos ACTTERM pos DE ACTCON pos DEACTCON pos ACTTERM pos ACTTERM pos E E S or E S or E E E Yes, H M I Yes, H M I No No Yes, H M I Yes, H M I I f avai l abl e I f avai l abl e No No I f avai l abl e I f avai l abl e PI CS, 9 PI CS, 9 PI CS, 9 PI CS, 9 PI CS, 9 PI CS, 9 QU =0 (n o ad d d ef ) M essag e from RTU Sh own beh avi ou r after Sel ect/Execu te Statu s ch an g e RTU Statu s ch an g e process Req u i red Resu l t Log fi l e avai l abl e (Y/N ) ? I EC TS 60870-5-604:201 © I EC 201 S+E u p – 02 – E on /off = Di rect Execu te com m an d on /off ASDU type = 47 (2 of 3) S+E d own S+D u p S+D d own E up E d own ACTTERM pos ACTTERM pos DEACTCON pos DEACTCON pos ACTTERM pos ACTTERM pos E E S or E S or E E E Yes, H M I Yes, H M I No No Yes, H M I Yes, H M I I f avai l abl e I f avai l abl e No No I f avai l abl e I f avai l abl e PI CS, 9 PI CS, 9 PI CS, 9 PI CS, 9 PI CS, 9 PI CS, 9 S+E on S+E off S+D on S+D off Eon Eoff M essag e from RTU ACTTERM pos ACTTERM pos DEACTCON pos DEACTCON pos ACTTERM pos ACTTERM pos Shown behaviour after Select / Execute E E S or E S or E E E Statu s ch an g e RTU Yes, H M I Yes, H M I No No Yes, H M I Yes, H M I I f avai l abl e I f avai l abl e No No I f avai l abl e I f avai l abl e PI CS, 9 PI CS, 9 PI CS, 9 PI CS, 9 PI CS, 9 PI CS, 9 QU=1 (short pulse) M essag e from RTU Sh own beh avi ou r after Sel ect/Execu te Statu s ch an g e RTU Status change process Req u i red Resu l t Log fi l e avai l abl e (Y/N ) ? ASDU type = 47 QU =2 (l on g pu l se) Statu s ch an g e process Req u i red Resu l t Log fi l e avai l abl e (Y/N ) ? – 03 – S+E u p I EC TS 60870-5-604:201 © I EC 201 Table 30 Table 30 ASDU type = 47 (3 of 3) S+E on S+E off S+D on S+D off Eon Eoff ACTTERM pos ACTTE RM pos DEACTCON pos DEACTCON pos ACTTERM pos ACTTERM pos E E S or E S or E E E Yes, H M I Yes, H M I No No Yes, H M I Yes, H M I I f avai l abl e I f avai l abl e No No I f avai l abl e I f avai l abl e PI CS, 9 PI CS, 9 PI CS, 9 PI CS, 9 PI CS, 9 PI CS, 9 QU =3 (persi sten t) M essag e from RTU Sh own beh avi ou r after Sel ect/Execu te Statu s ch an g e RTU Statu s ch an g e process Req u i red Resu l t Log fi l e avai l abl e (Y/N ) ? – 04 – G en eral rem arks I EC TS 60870-5-604:201 © I EC 201 Test results of setpoint com mand transm ission Table 31 – Test resu lts of setpoint command transmissi on (1 of 2) Test resu l ts of the Setpoi nt com m and (N VA) ACTCON pos=Posi ti ve Acti vati on Con fi rm ati on √ i nd i cates th e Test Procedu re PASSED for that fi gu rati on val ue ACTCON n eg=N eg ati ve Acti vati on Confi rm ati on FAI L i n d i cates Test Proced u re fai l ed for at l east on e of th e Test Cases DEACTCON pos=Deacti vati on Confi rm ati on posi ti ve N A i nd i cates th at fi g urati on val ue i s not su pported by th e d evi ce ACTTERM =Acti vati on Term i nati on Em pty i n di cates th e Test Proced u re was not perform ed (Th ere sh oul d be n o em pty boxes wh en testi n g i s com pl ete) I f ACTTERM i s stated i n row ‘ m essag e from th e RTU ’ , ACTCON pos wi th S/E=0 execu te h as been recei ved before Detai l ed i n form ati on on encl osures per Com m an d type I n th e case of a S+E com m and al so ACTCON pos wi th S/E=1 sel ect has been recei ved before th e ACT wi th S/E=0! The d atal i nk servi ces are n ot sh own i n th e detai l s, on l y the comm and ASDU s Each I OA coul d be confi g u red S/E or on l y E They sh ou l d n ot be abl e to su pport both at a ti m e N OTE Th i s tabl e sh ows th e on l y correct beh avi ou r Other behavi ou r m eans the test fai l ed! I EC TS 60870-5-604: 201 © I EC 201 5.6.5 S+E on /off = Sel ect an d E xecu te comm an d on /off E on /off = Di rect E xecu te comm an d on /off ASDU type = 48 S+E S+D E ACTCON pos / ACTTERM pos DEACTCON pos ACTCON pos / ACTTERM pos E S or E E Yes, H MI No Yes, H MI I f avai l abl e No I f avai l abl e PI CS, 9 PI CS, 9 PI CS, 9 QL=0 Messag e from RTU After S or E Status ch an g e RTU Status ch an g e process Req ui red Resu lt Log fi l es avai l abl e (Y/N )? General rem arks _ I f the PI CS states ACTTERM i s used, ACTTERM i s appl i cabl e, i f not ACTCON i s appl i cabl e – 05 – S+D = Sel ect and Deacti vate com m and on /off Table 31 ASDU type = 49 (2 of 2) S+E S+D E ACTCON pos / ACTTERM pos DEACTCON pos ACTCON pos / ACTTERM pos QL=0 Messag e from RTU After S or E Status ch an g e RTU Status ch an g e process Req ui red E S or E E Yes, H M I No Yes, H M I I f avai l abl e No I f avai l abl e PI CS, 9 PI CS, 9 PI CS, 9 S+E S+D E ACTCON pos / ACTTERM pos DEACTCON pos ACTCON pos / ACTTERM pos E S or E E Yes, H M I No Yes, H M I Resu lt Log fi l es avai l abl e (Y/N )? General rem arks ASDU type = 50 M essag e from RTU After S or E Status ch an g e RTU Status ch an g e process I f avai l abl e No I f avai l abl e PI CS, 9 PI CS, 9 PI CS, 9 Resu lt Log fi l es avai l abl e (Y/N )? General rem arks _ _ I f the PI CS states ACTTERM i s used ACTTERM i s appl i cabl e, i f n ot ACTCON i s appl i cabl e I EC TS 60870-5-604: 201 © I EC 201 Req ui red – 06 – QL=0 INTERNATIONAL ELECTROTECHNICAL COMMISSION 3, rue de Varembé PO Box 31 CH-1 21 Geneva 20 Switzerland Tel: + 41 22 91 02 1 Fax: + 41 22 91 03 00 info@iec.ch www.iec.ch