February 2012 IEC 60344 (Third edition – 2007) Calculation of d c resistance of plain and coated copper conductors of low frequency cables and wires – Application guide C O R R I G E N D U M 1 Table 2[.]
Calculation of d.c resistance of plain and coated copper conductors of low-frequency cables and wires – Application guide CORRIGENDUM Table – Twisting lay factor Replace the existing headings Nominal diameter of solid conductors d mm Nominal section of stranded conductors S mm by the following: Nominal diameter of solid conductors Nominal cross-section of stranded conductors mm mm d S Table – Cabling lay factor Replace the existing headings Nominal diameter of solid conductors d mm Nominal section of stranded conductors S mm by the following: Nominal diameter of solid conductors Nominal cross-section of stranded conductors mm mm d Table (continued) – Stranded conductor Replace the existing heading Nominal conductor section area (number of strands × nominal diameter of strand in mm) by the following: Nominal conductor cross-section (number of strands × nominal diameter of strand in mm) mm2 February 2012 S Copyrighted material licensed to BR Demo by Thomson Reuters (Scientific), Inc., subscriptions.techstreet.com, downloaded on Nov-28-2014 by James Madison No further reproduction or distribution is permitted Uncontrolled when printe IEC 60344 (Third edition – 2007)