1. Trang chủ
  2. » Kỹ Thuật - Công Nghệ

Iec 61029 2 8 1995 amd1 1999

4 3 0

Đang tải... (xem toàn văn)

THÔNG TIN TÀI LIỆU

Thông tin cơ bản

Định dạng
Số trang 4
Dung lượng 81,75 KB

Nội dung

INTERNATIONAL STANDARD IEC 61029 2 8 1995 AMENDMENT 1 1999 02 Amendment 1 Safety of transportable motor operated electric tools – Part 2 8 Particular requirements for single spindle vertical moulders[.]

INTERNATIONAL STANDARD IEC 61029-2-8 1995 AMENDMENT 1999-02 LICENSED TO MECON Limited - RANCHI/BANGALORE FOR INTERNAL USE AT THIS LOCATION ONLY, SUPPLIED BY BOOK SUPPLY BUREAU Amendment Safety of transportable motor-operated electric tools – Part 2-8: Particular requirements for single spindle vertical moulders Amendement Sécurité des machines-outils électriques semi-fixes – Partie 2-8: Règles particulières pour les toupies monobroches verticales  IEC 1999  Copyright - all rights reserved International Electrotechnical Commission 3, rue de Varembé Geneva, Switzerland Telefax: +41 22 919 0300 e-mail: inmail@iec.ch IEC web site http://www.iec.ch Commission Electrotechnique Internationale International Electrotechnical Commission PRICE CODE C For price, see current catalogue LICENSED TO MECON Limited - RANCHI/BANGALORE FOR INTERNAL USE AT THIS LOCATION ONLY, SUPPLIED BY BOOK SUPPLY BUREAU –3– 61029-2-8 Amend  IEC:1999 FOREWORD This amendment has been prepared by subcommittee 61F: Safety of hand-held motor-operated electric tools, of IEC technical committee 61: Safety of household and similar electrical appliances The text of this amendment is based on the following documents: FDIS Report on voting 61F/258/FDIS 61F/264/RVD –––––––––– Page 15 18 Stability and mechanical hazards Subclause 18.1 Add the following new paragraph: The machine shall be equipped with means to fix anti-kickback devices (e.g adjustable end stops) at the fence or at the extension table Such means may be fixing holes of 12 mm diameter maximum The anti-kickback devices shall be capable of withstanding a static force of 300 N in the direction of kickback without permanent damage The position of such devices shall be adjustable on both sides of the spindle up to a distance equal to double the fence length ––––––––––– LICENSED TO MECON Limited - RANCHI/BANGALORE FOR INTERNAL USE AT THIS LOCATION ONLY, SUPPLIED BY BOOK SUPPLY BUREAU Full information on the voting for the approval of this amendment can be found in the report on voting indicated in the above table LICENSED TO MECON Limited - RANCHI/BANGALORE FOR INTERNAL USE AT THIS LOCATION ONLY, SUPPLIED BY BOOK SUPPLY BUREAU ISBN 2-8318-4691-9 &1+', ;79

Ngày đăng: 17/04/2023, 10:47