Iec 60384 13 2011

IEC 60384 13 Edition 4 0 2011 12 INTERNATIONAL STANDARD NORME INTERNATIONALE Fixed capacitors for use in electronic equipment – Part 13 Sectional specification – Fixed polypropylene film dielectric me[.]

® Edition 4.0 2011-12 INTERNATIONAL STANDARD NORME INTERNATIONALE Fixed capacitors for use in electronic equipment – Part 13: Sectional specification – Fixed polypropylene film dielectric metal foil d.c capacitors IEC 60384-13:2011 Condensateurs fixes utilisés dans les équipements électroniques – Partie 13: Spécification intermédiaire – Condensateurs fixes pour courant continu diélectrique en film de polypropylène armatures en feuilles métalliques Copyrighted material licensed to BR Demo by Thomson Reuters (Scientific), Inc., subscriptions.techstreet.com, downloaded on Nov-28-2014 by James Madison No further reproduction or distribution is permitted Uncontrolled when printe IEC 60384-13 Copyright © 2011 IEC, Geneva, Switzerland All rights reserved Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either IEC or IEC's member National Committee in the country of the requester If you have any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or your local IEC member National Committee for further information Droits de reproduction réservés Sauf indication contraire, aucune partie de cette publication ne peut être reproduite ni utilisée sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie et les microfilms, sans l'accord écrit de la CEI ou du Comité national de la CEI du pays du demandeur Si vous avez des questions sur le copyright de la CEI ou si vous désirez obtenir des droits supplémentaires sur cette publication, utilisez les coordonnées ci-après ou contactez le Comité national de la CEI de votre pays de résidence IEC Central Office 3, rue de Varembé CH-1211 Geneva 20 Switzerland Email: inmail@iec.ch Web: www.iec.ch About the IEC The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes International Standards for all electrical, electronic and related technologies About IEC publications The technical content of IEC publications is kept under constant review by the IEC Please make sure that you have the latest edition, a corrigenda or an amendment might have been published  Catalogue of IEC publications: www.iec.ch/searchpub The IEC on-line Catalogue enables you to search by a variety of criteria (reference number, text, technical committee,…) It also gives information on projects, withdrawn and replaced publications  IEC Just Published: www.iec.ch/online_news/justpub Stay up to date on all new IEC publications Just Published details twice a month all new publications released Available on-line and also by email  Electropedia: www.electropedia.org The world's leading online dictionary of electronic and electrical terms containing more than 20 000 terms and definitions in English and French, with equivalent terms in additional languages Also known as the International Electrotechnical Vocabulary online  Customer Service Centre: www.iec.ch/webstore/custserv If you wish to give us your feedback on this publication or need further assistance, please visit the Customer Service Centre FAQ or contact us: Email: csc@iec.ch Tel.: +41 22 919 02 11 Fax: +41 22 919 03 00 A propos de la CEI La Commission Electrotechnique Internationale (CEI) est la première organisation mondiale qui élabore et publie des normes internationales pour tout ce qui a trait l'électricité, l'électronique et aux technologies apparentées A propos des publications CEI Le contenu technique des publications de la CEI est constamment revu Veuillez vous assurer que vous possédez l’édition la plus récente, un corrigendum ou amendement peut avoir été publié  Catalogue des publications de la CEI: www.iec.ch/searchpub/cur_fut-f.htm Le Catalogue en-ligne de la CEI vous permet d’effectuer des recherches en utilisant différents critères (numéro de référence, texte, comité d’études,…) Il donne aussi des informations sur les projets et les publications retirées ou remplacées  Just Published CEI: www.iec.ch/online_news/justpub Restez informé sur les nouvelles publications de la CEI Just Published détaille deux fois par mois les nouvelles publications parues Disponible en-ligne et aussi par email  Electropedia: www.electropedia.org Le premier dictionnaire en ligne au monde de termes électroniques et électriques Il contient plus de 20 000 termes et dộfinitions en anglais et en franỗais, ainsi que les termes équivalents dans les langues additionnelles Egalement appelé Vocabulaire Electrotechnique International en ligne  Service Clients: www.iec.ch/webstore/custserv/custserv_entry-f.htm Si vous désirez nous donner des commentaires sur cette publication ou si vous avez des questions, visitez le FAQ du Service clients ou contactez-nous: Email: csc@iec.ch Tél.: +41 22 919 02 11 Fax: +41 22 919 03 00 Copyrighted material licensed to BR Demo by Thomson Reuters (Scientific), Inc., subscriptions.techstreet.com, downloaded on Nov-28-2014 by James Madison No further reproduction or distribution is permitted Uncontrolled when printe THIS PUBLICATION IS COPYRIGHT PROTECTED ® Edition 4.0 2011-12 INTERNATIONAL STANDARD NORME INTERNATIONALE Fixed capacitors for use in electronic equipment – Part 13: Sectional specification – Fixed polypropylene film dielectric metal foil d.c capacitors Condensateurs fixes utilisés dans les équipements électroniques – Partie 13: Spécification intermédiaire – Condensateurs fixes pour courant continu diélectrique en film de polypropylène armatures en feuilles métalliques INTERNATIONAL ELECTROTECHNICAL COMMISSION COMMISSION ELECTROTECHNIQUE INTERNATIONALE PRICE CODE CODE PRIX ICS 31.060.30 ® Registered trademark of the International Electrotechnical Commission Marque déposée de la Commission Electrotechnique Internationale U ISBN 978-2-88912-814-3 Copyrighted material licensed to BR Demo by Thomson Reuters (Scientific), Inc., subscriptions.techstreet.com, downloaded on Nov-28-2014 by James Madison No further reproduction or distribution is permitted Uncontrolled when printe IEC 60384-13 60384-13 © IEC:2011 CONTENTS FOREWORD General 1.1 Scope 1.2 Object 1.3 Normative references 1.4 Information to be given in a detail specification 1.5 Terms and definitions 1.6 Marking Preferred ratings and characteristics 2.1 Preferred characteristics 2.2 Preferred values of ratings Quality assessment procedures 10 3.1 3.2 3.3 3.4 3.5 Test Primary stage of manufacture 10 Structurally similar components 11 Certified records of released lots 11 Qualification approval 11 Quality conformance inspection 17 and measurement procedures 19 4.1 4.2 4.3 4.4 4.5 4.6 4.7 4.8 4.9 4.10 4.11 4.12 4.13 4.14 Visual examination and check of dimensions 19 Electrical tests 19 Robustness of terminations 22 Resistance to soldering heat 22 Solderability 22 Rapid change of temperature 23 Vibration 23 Bump 23 Shock 24 Climatic sequence 24 Damp heat, steady state 25 Endurance 26 Component solvent resistance 26 Solvent resistance of marking 26 Table – Preferred tolerances Table – Preferred values and combinations 10 Table – Sampling plan together with numbers of permissible non-conformance for qualification approval test 12 Table – Test schedule for qualification approval 13 Table – Lot-by-lot inspection 18 Table – Periodic inspection 18 Table – Test points and voltages 19 Table – Insulation resistance requirements 21 Table – Correction factors 21 Copyrighted material licensed to BR Demo by Thomson Reuters (Scientific), Inc., subscriptions.techstreet.com, downloaded on Nov-28-2014 by James Madison No further reproduction or distribution is permitted Uncontrolled when printe –2– –3– Table 10 – Preferred severities 24 Table 11 – Test conditions 26 Copyrighted material licensed to BR Demo by Thomson Reuters (Scientific), Inc., subscriptions.techstreet.com, downloaded on Nov-28-2014 by James Madison No further reproduction or distribution is permitted Uncontrolled when printe 60384-13 © IEC:2011 60384-13 © IEC:2011 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT – Part 13: Sectional specification – Fixed polypropylene film dielectric metal foil d.c capacitors FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees) The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”) Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work International, governmental and nongovernmental organizations liaising with the IEC also participate in this preparation IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter 5) IEC itself does not provide any attestation of conformity Independent certification bodies provide conformity assessment services and, in some areas, access to IEC marks of conformity IEC is not responsible for any services carried out by independent certification bodies 6) All users should ensure that they have the latest edition of this publication 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications 8) Attention is drawn to the Normative references cited in this publication Use of the referenced publications is indispensable for the correct application of this publication 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights IEC shall not be held responsible for identifying any or all such patent rights International Standard IEC 60384-13 has been prepared by IEC technical committee 40: Capacitors and resistors for electronic equipment This fourth edition cancels and replaces the third edition published in 2006 and contains the following significant technical changes with respect to the previous edition – Table 3, Sampling plan together with numbers of permissible non-conformance for qualification approval test, has been adjusted – Table 5, Lot-by-lot inspection, has been changed, highlighting assessment level EZ only – Table 6, Periodic inspection, has been changed, highlighting assessment level EZ only Copyrighted material licensed to BR Demo by Thomson Reuters (Scientific), Inc., subscriptions.techstreet.com, downloaded on Nov-28-2014 by James Madison No further reproduction or distribution is permitted Uncontrolled when printe –4– –5– The text of this standard is based on the following documents: FDIS Report on voting 40/2130/FDIS 40/2143/RVD Full information on the voting for the approval of this standard can be found in the report on voting indicated in the above table This publication has been drafted in accordance with the ISO/IEC directives, Part A list of all the parts of the IEC 60384 series, under the general title Fixed capacitors for use in electronic equipment, can be found on the IEC website The committee has decided that the contents of this publication will remain unchanged until the stability date indicated on the IEC web site under "http://webstore.iec.ch" in the data related to the specific publication At this date, the publication will be • • • • reconfirmed, withdrawn, replaced by a revised edition, or amended Copyrighted material licensed to BR Demo by Thomson Reuters (Scientific), Inc., subscriptions.techstreet.com, downloaded on Nov-28-2014 by James Madison No further reproduction or distribution is permitted Uncontrolled when printe 60384-13 © IEC:2011 60384-13 © IEC:2011 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT – Part 13: Sectional specification – Fixed polypropylene film dielectric metal foil d.c capacitors General 1.1 Scope This part of IEC 60384 applies to fixed direct current capacitors, using as dielectric a polypropylene film with electrodes of thin metal foils The capacitors covered by this standard are intended for use in electronic equipment Capacitors for electromagnetic interference suppression are not included, but are covered by IEC 60384-14 1.2 Object The object of this standard is to prescribe preferred ratings and characteristics and to select from IEC 60384-1, the appropriate quality assessment procedures, tests and measuring methods, and to give general performance requirements for this type of capacitor Test severities and requirements prescribed in detail specifications referring to this sectional specification are of at least equal or higher performance level, because lower performance levels are not permitted 1.3 Normative references The following referenced documents are indispensable for the application of this document For dated references, only the edition cited applies For undated references, the latest edition of the referenced document (including any amendments) applies IEC 60063:1963, Preferred number series for resistors and capacitors Amendment (1967) Amendment (1977) IEC 60068-1, Environmental testing – Part 1:General and guidance IEC 60384-1:2008, specification Fixed capacitors for use in electronic equipment – Part 1: Generic IEC 60384-13-1, Fixed capacitors for use in electronic equipment – Part 13-1: Blank detail specification – Fixed polypropylene film dielectric metal foil d.c capacitors – Assessment level E and EZ IEC 60384-14, Fixed capacitors for use in electronic equipment – Part 14: Sectional specification: Fixed capacitors for electromagnetic interference suppression and connection to the supply mains IEC 60410:1973, Sampling plans and procedures for inspection by attributes IEC 61193-2, Quality assessment systems – Part 2: Selection and use of sampling plans for inspection of electronic components and packages ISO 3, Preferred numbers – Series of preferred numbers Copyrighted material licensed to BR Demo by Thomson Reuters (Scientific), Inc., subscriptions.techstreet.com, downloaded on Nov-28-2014 by James Madison No further reproduction or distribution is permitted Uncontrolled when printe –6– 1.4 –7– Information to be given in a detail specification Detail specifications shall be derived from the relevant blank detail specification Detail specifications shall not specify requirements inferior to those of the generic, sectional or blank detail specification When more severe requirements are included, they shall be listed in 1.9 of the detail specification and indicated in the test schedules, for example by an asterisk NOTE The information given in 1.4.1 may, for convenience, be presented in tabular form The following information shall be given in each detail specification and the values quoted shall preferably be selected from those given in the appropriate clause of this sectional specification 1.4.1 Outline drawing and dimensions These shall be an illustration of the capacitor as an aid to easy recognition and for comparison of the capacitor with others Dimensions and their associated tolerances, which affect interchangeability and mounting, shall be given in the detail specification All dimensions shall preferably be stated in millimetres Normally, the numerical values shall be given for the length, the width and height of the body and the wire spacing, or for cylindrical types, the body diameter, and the length and diameter of the terminations When necessary, for example, when a number of items (capacitance values/voltage ranges) are covered by a detail specification, the dimensions and their associated tolerances shall be placed in a table below the drawing When the configuration is other than described above, the detail specification shall state such dimensional information as will adequately describe the capacitor When the capacitor is not designed for use on printed boards, this shall be clearly stated in the detail specification 1.4.2 Mounting The detail specification shall specify the method of mounting to be applied for normal use and for the application of the vibration and the bump or shock tests The capacitors shall be mounted by their normal means The design of the capacitor may be such that special mounting fixtures are required in its use In this case, the detail specification shall describe the mounting fixtures and they shall be used in the application of the vibration and bump or shock tests 1.4.3 Rating and characteristics The ratings and characteristics shall be in accordance with the relevant clauses of this specification, together with the following 1.4.3.1 Particular characteristics Additional characteristics may be listed, when they are considered necessary to specify adequately the component for design and application purposes 1.4.3.2 Soldering The detail specification shall prescribe the test methods, severities and requirements applicable for the solderability and the resistance to solder heat test 1.4.4 Marking The detail specification shall specify the content of the marking on the capacitor and on the package Deviations from 1.6 of this sectional specification shall be specifically stated Copyrighted material licensed to BR Demo by Thomson Reuters (Scientific), Inc., subscriptions.techstreet.com, downloaded on Nov-28-2014 by James Madison No further reproduction or distribution is permitted Uncontrolled when printe 60384-13 © IEC:2011 1.5 60384-13 © IEC:2011 Terms and definitions For the purpose of this document, the terms and definitions given in IEC 60384-1 and the following apply 1.5.1 stability class tolerance on the temperature coefficient together with the permissible change of capacitance after defined tests NOTE The stability class is stated in the detail specification NOTE Table shows the preferred stability classes 1.5.2 rated voltage UR maximum d.c voltage which may be applied continuously to a capacitor at the rated temperature NOTE The sum of the d.c voltage and the peak a.c voltage applied to the capacitor should not exceed the rated voltage The value of the peak a.c voltage should not exceed the following percentages of the rated voltage at the frequencies stated and should be not greater than 280 V: 50 Hz: 20 % 100 Hz: 15 % 000 Hz: 3% 10 000 Hz: 1% unless otherwise specified in the detail specification 1.6 Marking See IEC 60384-1, 2.4 with the following details 1.6.1 General The information given in the marking is normally selected from the following list; the relative importance of each item is indicated by its position in the list – nominal capacitance; – rated voltage (d.c voltage may be indicated by the symbol – tolerance on nominal capacitance; – year and month (or week) of manufacture; – manufacturer’s name or trade mark; – temperature coefficient and stability class; – climatic category; – manufacturer’s type designation; – reference to the detail specification; 1.6.2 or ); Marking of capacitors The capacitor shall be clearly marked with a), b) and c) of 1.6.1 and with as many as possible of the remaining items as is considered necessary Any duplication of information in the marking on the capacitor should be avoided Copyrighted material licensed to BR Demo by Thomson Reuters (Scientific), Inc., subscriptions.techstreet.com, downloaded on Nov-28-2014 by James Madison No further reproduction or distribution is permitted Uncontrolled when printe –8–