Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 15/04/2010 02:01, Uncontrolled Copy, (c) BSI BS EN 62453-309:2009 BSI Standards Publication Field device tool (FDT) interface specification — Part 309: Communication profile integration — IEC 61784 CPF NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW raising standards worldwide™ Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 15/04/2010 02:01, Uncontrolled Copy, (c) BSI BRITISH STANDARD BS EN 62453-309:2009 National foreword This British Standard is the UK implementation of EN 62453-309:2009 It is identical to IEC 62453-309:2009 The UK participation in its preparation was entrusted to Technical Committee AMT/7, Industrial communications: process measurement and control, including fieldbus A list of organizations represented on this committee can be obtained on request to its secretary This publication does not purport to include all the necessary provisions of a contract Users are responsible for its correct application © BSI 2010 ISBN 978 580 62565 ICS 25.040.40; 35.100.05; 35.110 Compliance with a British Standard cannot confer immunity from legal obligations This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 January 2010 Amendments issued since publication Amd No Date Text affected Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 15/04/2010 02:01, Uncontrolled Copy, (c) BSI BS EN 62453-309:2009 EUROPEAN STANDARD EN 62453-309 NORME EUROPÉENNE October 2009 EUROPÄISCHE NORM ICS 25.040.40; 35.100.05; 35.110 English version Field device tool (FDT) interface specification Part 309: Communication profile integration IEC 61784 CPF (IEC 62453-309:2009) Spécification des interfaces des outils des dispositifs de terrain (FDT) Partie 309: Intégration des profils de communication CEI 61784 CPF (CEI 62453-309:2009) Field Device Tool (FDT)Schnittstellenspezifikation Teil 309: Integration von Kommunikationsprofilen Kommunikationsprofilfamilie (CPF) nach IEC 61784 (IEC 62453-309:2009) This European Standard was approved by CENELEC on 2009-08-01 CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member This European Standard exists in three official versions (English, French, German) A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom CENELEC European Committee for Electrotechnical Standardization Comité Européen de Normalisation Electrotechnique Europäisches Komitee für Elektrotechnische Normung Central Secretariat: Avenue Marnix 17, B - 1000 Brussels © 2009 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members Ref No EN 62453-309:2009 E Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 15/04/2010 02:01, Uncontrolled Copy, (c) BSI BS EN 62453-309:2009 EN 62453-309:2009 -2- Foreword The text of document 65E/130/FDIS, future edition of IEC 62453-309, prepared by SC 65E, Devices and integration in enterprise systems, of IEC TC 65, Industrial-process measurement, control and automation, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as EN 62453-309 on 2009-08-01 Each part of the EN 62453-3xy series is intended to be read in conjunction with EN 62453-2 The following dates were fixed: – latest date by which the EN has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2010-05-01 – latest date by which the national standards conflicting with the EN have to be withdrawn (dow) 2012-08-01 Annex ZA has been added by CENELEC Endorsement notice The text of the International Standard IEC 62453-309:2009 was approved by CENELEC as a European Standard without any modification Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 15/04/2010 02:01, Uncontrolled Copy, (c) BSI -3- BS EN 62453-309:2009 EN 62453-309:2009 Annex ZA (normative) Normative references to international publications with their corresponding European publications The following referenced documents are indispensable for the application of this document For dated references, only the edition cited applies For undated references, the latest edition of the referenced document (including any amendments) applies NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies Publication Year Title EN/HD Year 1) EN 61158-5-20 Industrial communication networks Fieldbus specifications Part 5-20: Application layer service definition Type 20 elements 2008 2) 1) Industrial communication networks Fieldbus specifications Part 6-20: Application layer protocol specification - Type 20 elements EN 61158-6-20 2008 2) 1) 2) IEC 61158-5-20 – IEC 61158-6-20 – IEC 61784-1 – Industrial communication networks Profiles Part 1: Fieldbus profiles EN 61784-1 2008 IEC 62453-1 2009 Field device tool (FDT) interface specification - EN 62453-1 Part 1: Overview and guidance 2009 IEC 62453-2 2009 Field device tool (FDT) interface specification - EN 62453-2 Part 2: Concepts and detailed description 2009 1) Undated reference 2) Valid edition at date of issue Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 15/04/2010 02:01, Uncontrolled Copy, (c) BSI BS EN 62453-309:2009 –2– 62453-309 © IEC:2009(E) CONTENTS INTRODUCTION Scope .7 Normative references .7 Terms, definitions, symbols, abbreviated terms and conventions 3.1 3.2 3.3 Terms and definitions Abbreviated terms Conventions 3.3.1 Data type names and references to data types 3.3.2 Vocabulary for requirements 3.3.3 Use of UML Bus category Access to instance and device data 5.1 Process Channel objects provided by DTM 5.2 DTM services to access instance and device data Protocol specific behavior .9 6.1 Overview 6.2 Burst mode subscription Protocol specific usage of general data types 10 Protocol specific common data types 11 Network management data types 11 10 Communication data types 11 11 Channel parameter data types 15 12 Device identification 17 12.1 Protocol specific handling of data type STRING 17 12.2 Common device type identification data types 17 12.3 Topology scan data types 22 12.4 Scan identification data types 23 12.5 Device type identification data types – provided by DTM 24 Bibliography 27 Figure – Part 309 of the IEC 62453 series Figure – Burst mode subscription 10 Table – Protocol identifiers Table – Protocol specific usage of general data types 10 Table – Simple communication data types 11 Table – Structured communication data types 12 Table – Simple channel parameter data types 16 Table – Structured channel parameter data types 16 Table – Identification data types with protocol specific mapping 19 Table – Identification data types without protocol independent semantics 21 Table – Simple identification data types with protocol independent semantics 22 Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 15/04/2010 02:01, Uncontrolled Copy, (c) BSI BS EN 62453-309:2009 62453-309 © IEC:2009(E) –3– Table 10 – Structured identification data types with protocol independent semantics 22 Table 11 – Structured device type identification data types 22 Table 12 – Simple scan identification data types 23 Table 13 – Structured scan identification data types 23 Table 14 – Structured device type identification data types 25 Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 15/04/2010 02:01, Uncontrolled Copy, (c) BSI BS EN 62453-309:2009 62453-309 © IEC:2009(E) –6– INTRODUCTION This part of IEC 62453 is an interface specification for developers of FDT (Field Device Tool) components for function control and data access within a client/server architecture The specification is a result of an analysis and design process to develop standard interfaces to facilitate the development of servers and clients by multiple vendors that need to interoperate seamlessly With the integration of fieldbusses into control systems, there are a few other tasks which need to be performed In addition to fieldbus- and device-specific tools, there is a need to integrate these tools into higher-level system-wide planning- or engineering tools In particular, for use in extensive and heterogeneous control systems, typically in the area of the process industry, the unambiguous definition of engineering interfaces that are easy to use for all those involved is of great importance A device-specific software component, called DTM (Device Type Manager), is supplied by the field device manufacturer with its device The DTM is integrated into engineering tools via the FDT interfaces defined in this specification The approach to integration is in general open for all kind of fieldbusses and thus meets the requirements for integrating different kinds of devices into heterogeneous control systems Figure shows how IEC 62453-309 is aligned in the structure of the IEC 62453 series Part 309 Communication profile integration – IEC 61784 CPF IEC 1134/09 Figure – Part 309 of the IEC 62453 series Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 15/04/2010 02:01, Uncontrolled Copy, (c) BSI BS EN 62453-309:2009 62453-309 © IEC:2009(E) –7– FIELD DEVICE TOOL (FDT) INTERFACE SPECIFICATION – Part 309: Communication profile integration – IEC 61784 CPF Scope Communication Profile Family (commonly known as HART® 1) defines communication profiles based on IEC 61158-5-20 and IEC 61158-6-20 The basic profile CP 9/1 is defined in IEC 61784-1 This part of IEC 62453 provides information for integrating the HART® technology into the FDT standard (IEC 62453-2) This part of the IEC 62453 specifies communication and other services This standard neither contains the FDT specification nor modifies it Normative references The following referenced documents are indispensable for the application of this specification For dated references, only the edition cited applies For undated references, the latest edition of the referenced document (including any amendments) applies IEC 61158-5-20, Industrial communication networks – Fieldbus specifications – Part 5-20: Application layer service definition – Type 20 elements IEC 61158-6-20, Industrial communication networks – Fieldbus specifications – Part 6-20: Application layer protocol specification – Type 20 elements IEC 61784-1, Industrial communication networks – Profiles – Part 1: Fieldbus profiles IEC 62453-1:2009, guidance Field Device Tool (FDT) interface specification – Part 1: Overview and IEC 62453-2:2009, Field Device Tool (FDT) interface specification – Part 2: Concepts and detailed description 3.1 Terms, definitions, symbols, abbreviated terms and conventions Terms and definitions For the purposes of this document, the terms and definitions given in IEC 62453-1 and IEC 62453-2 and the following apply ————————— HART ® is the trade name of the product supplied by HART Communication Foundation This information is given for convenience of users of this document and does not constitute an endorsement by IEC of the product named Equivalent products may be used if they can be shown to lead to the same results Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 15/04/2010 02:01, Uncontrolled Copy, (c) BSI BS EN 62453-309:2009 62453-309 © IEC:2009(E) –8– 3.1.1 burst mode mode in which the field device generates response telegrams without request telegram from the master 3.2 Abbreviated terms For the purposes of this document, the abbreviations given in IEC 62453-1, IEC 62453-2 and the following apply 3.3 BACK Burst ACKnowledge UML Unified Modelling Language Conventions 3.3.1 Data type names and references to data types The conventions for naming and referencing of data types are explained in IEC 62453-2, Clause A.1 3.3.2 Vocabulary for requirements The following expressions are used when specifying requirements 3.3.3 Usage of “shall” or “mandatory” No exceptions allowed Usage of “should” or “recommended” Strong recommendation It may make sense in special exceptional cases to differ from the described behaviour Usage of “can’ or “optional’ Function or behaviour may be provided, depending on defined conditions Use of UML Figures in this document are using UML notation as defined in Annex A of IEC 62453-1 Bus category IEC 61784 CPF protocol is identified in the protocolId element of structured data type 'fdt:BusCategory' by the following unique identifier (Table 1): Table – Protocol identifiers Identifier value 036D1498-387B-11D4-86E1-00E0987270B9 5.1 ProtocolId name ‘HART’ Description Support of IEC 61784 CPF protocol Access to instance and device data Process Channel objects provided by DTM The minimum set of provided data shall be: • the first four provided process related values (PV, SV, …) - if available - are modeled as channel references The referenced channel shall include ranges and scaling Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 15/04/2010 02:01, Uncontrolled Copy, (c) BSI BS EN 62453-309:2009 – 16 – 62453-309 © IEC:2009(E) Table – Simple channel parameter data types Data type Definition Description byteLength USINT Number of static bytes in a Request or in a Reply commandNumber UDINT Number of the command containing the channel value frameApplicationTag STRING Frame Application specific tag used for identification and navigation The DTM should display this tag at channel specific user interfaces gatewayBusCategory UUID Unique identifier for a supported bus type according to the FDT specific CATID protectedByChannelAssign ment BOOL TRUE if the channel is set to read only by the Frame Application Usually set to TRUE if a channel assignment exists value STRING Current value of a channel for read or write Table – Structured channel parameter data types Data type Definition Elementary data types CommandParameters FDTChannel U s a g e Multiplicity STRUCT Static command parameter bytes in a Request or in a Reply fdt:binData O [0 1] byteLength M [1 1] STRUCT Description of the channel fdt:tag M [1 1] fdt:id M [1 1] fdt:descriptor O [0 1] protectedByChannelAssignment FDTChannelType Description M [1 1] fdt:dataType M [1 1] byteLength M [1 1] fdt:signalType M [1 1] frameApplicationTag O [0 1] appId:applicationId O [0 1] fdt:SemanticInformation O [0 *] fdt:BitEnumeratorEntries O [0 1] fdt:EnumeratorEntries O [0 1] fdt:Unit O [0 1] ReadCommand O [0 1] WriteCommand O [0 1] fdt:Alarms O [0 1] fdt:Ranges O [0 1] fdt:Deadband O [0 1] fdt:SubstituteValue O [0 1] STRUCT fdt:VersionInformation Description of the channel component in case of channels with gateway functionality M [1 1] Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 15/04/2010 02:01, Uncontrolled Copy, (c) BSI BS EN 62453-309:2009 62453-309 © IEC:2009(E) Data type – 17 – Definition Elementary data types gatewayBusCategory ReadCommand Reply Description U s a g e Multiplicity O [0 1] STRUCT Description of the command to read the channel from a device commandNumber M [1 1] Request O [0 1] Reply O [0 1] ResponseCodes O [0 1] STRUCT collection of [0 *] CommandParameters [0 *] Description of the request structure of a command according to the IEC 61784 CPF specification M [1 1] fdt:ChannelReference [0 *] CommandParameters [0 *] STRUCT fdt:EnumeratorEntry WriteCommand O [0 1] STRUCT collection of ResponseCodes M [1 1] fdt:ChannelReference ResponseCodes Request Description of the reply structure of a command according to the IEC 61784 CPF specification Collection of specific response codes according to the IEC 61784 CPF specification (known as COMMANDSPECIFIC RESPONSE CODES) M [1 *] STRUCT Description of the command to write the channel to a device commandNumber M [1 1] Request O [0 1] Reply O [0 1] ResponseCodes O [0 1] 12 Device identification 12.1 Protocol specific handling of data type STRING IEC 61784 CPF char array rules: • in all strings with char ranges, the leading spaces are left trimmed The char array is to be filled with 0x20h (blank); • in VisibleStrings, invisible characters provided by a device have to be replaced by '?' 12.2 Common device type identification data types The data types described in this subclause are reused as defined by 12.3 and 12.5 Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 15/04/2010 02:01, Uncontrolled Copy, (c) BSI BS EN 62453-309:2009 – 18 – 62453-309 © IEC:2009(E) The IEC 61784 CPF device type identification data types provide general data types with a protocol specific semantic (see Table and Table 8) as well as data types without such a mapping (see Table and Table 10) The data types described in this subclause are defined for following namespace Namespace: hartident Command Byte - Manufacturers Device Type code Command Byte IdTypeID IdSoftware Revision deviceTypeID softwareRevi sion HART : Manufacturer Device Type Code HART6 : Manufacturer Identification Code Command Byte - Software Revision Device Type Code Manufacturer Identification Code HART Revision IdBusProtoc Command Byte olVersion universalCom mandRevisio nLevel bit unsigned integer bit unsigned integer USINT USINT (dec) USINT (dec) bit unsigned integer Example : Endress+Hauser: 17 (0x11) USINT (dec) enumerati on ( HART ) USINT (display format) FDT data type bit unsigned integer Enumeration : “HART” for HART5 and HART6 Unsigned IEC 61784 CPF data format [1] Chapter 6.1 Command Read Unique Identifier [1] Chapter 6.1 Command Read Unique Identifier [2] Chapter 5.8 Manufacturer Identification Codes [1] Chapter 6.1 Command Read Unique Identifier [1] Chapter 6.8 Command Read Loop Configuration Specification reference 62453-309 © IEC:2009(E) manufacturerI IdManufact dentificationC urer ode HART IdBusProtoc CommChannel has to pass ”HART” in this attribute ol Polling Address Protocol specific name busProtocol Cmd #0 response does not contain short address value whether the short or long format is used If master using short address for polling receives a response, it can assume that short address of device is the same as used in the polling request In addition to this, polling address can be read from HART device with cmd #7 Poll possible address range (HART5 : [0-15], HART : [0-63] ) by calling Cmd If Cmd response is available, a physical device is connected to this address Data request in physical device IdAddress Semantic element name shortAddress IEC 61784 CPF Attribute Table – Identification data types with protocol specific mapping Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 15/04/2010 02:01, Uncontrolled Copy, (c) BSI BS EN 62453-309:2009 – 19 – Semantic element name IdHardware Revision IdTag IdSerialNu mber IdDTMSupp ortLevel IEC 61784 CPF Attribute hardwareRevi sion tag deviceID N/A BlockSpecificProfileDTM ProfileDTM, GenericDTM, Enumeration: Attribute to be used only in DTMDeviceType identification Not applicable for scan / physical device Command Bytes - 11 Command 13 Bytes - Command Byte Data request in physical device - DTM Support Level enumerati on ( genericSu pport | profileSup port | blockspec ificProfile Support | specificSu pport | identSupp ort ) UDINT Unsigned 24 Device Identification Number REAL (display format) FDT data type STRING Last bits (y) to Physical Signaling Code First bits (x) refers to HW revision level (mapped to float : xxxxx.yyy) bit unsigned integer IEC 61784 CPF data format Bytes or Packed ASCII characters Tag Hardware Revision Protocol specific name - [1] Chapter 6.1 Command Read Unique Identifier [1] Chapter 6.13 Command 13 Read Tag, Descriptor, Date [1] Chapter 6.1 Command Read Unique Identifier Specification reference Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 15/04/2010 02:01, Uncontrolled Copy, (c) BSI – 20 – BS EN 62453-309:2009 62453-309 © IEC:2009(E) - - deviceCom mandRevis ionLevel deviceFlag Can be used by DTM for a vendor specific device identification information, for example by combining a number of device parameter values into one string value This can be used to identify a specific device variant Command Byte Command Byte Data request in physical device Flags Device Revision Level Protocol specific name bit - unsigned int Bit value according Flag Assignment table bit unsigned integer IEC 61784 CPF data format [2] Chapter 5.11 Table Flag Assignments USINT (hex) STRING [1] Chapter 6.1 Command Read Unique Identifier Specification reference USINT (dec) (display format) XML-FDT format 62453-309 © IEC:2009(E) manufactur erSpecificE xtension Semantic element name IEC 61784 CPF Attribute Table – Identification data types without protocol independent semantics Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 15/04/2010 02:01, Uncontrolled Copy, (c) BSI BS EN 62453-309:2009 – 21 – Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 15/04/2010 02:01, Uncontrolled Copy, (c) BSI BS EN 62453-309:2009 62453-309 © IEC:2009(E) – 22 – Table – Simple identification data types with protocol independent semantics Data type Definition Description idDTMSupportLevel enumeration ( genericSupport | profileSupport | blockspecificProfileSupport | specificSupport | identSupport ) enumeration genericSupport profileSupport blockspecificProfileSupport specificSupport match STRING Used by Device DTM to define a regular expression which shall match to scanned physical define identification information nomatch STRING Used by Device DTM to define a regular expression which shall not match to scanned physical define identification information Used by Device DTM to indicate if identification information may not match Table 10 – Structured identification data types with protocol independent semantics Elements Definition Elementary data types RegExpr 12.3 Usage Description Multiplicity STRUCT Includes regular expression string – either for match or for nomatch match O [0 1] nomatch O [0 1] Topology scan data types This data type is used at Scan service response The data types describe one entry in the list of scanned devices (see Table 11) The data types described in this subclause are defined for the following namespace Namespace: fdthartdevice Table 11 – Structured device type identification data types Data type Definition Elementary data types Usage Description Multiplicity HARTDevice STRUCT Definition of a IEC 61784 CPF device concerning the scan response fdthart:LongAddress O [0 1] fdthart:manufacturerId O [0 1] fdthart:deviceTypeId O [0 1] fdt:subDeviceType O [0 1] fdt:tag M [1 1] fdthart:shortAddress O [0 1] Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 15/04/2010 02:01, Uncontrolled Copy, (c) BSI BS EN 62453-309:2009 62453-309 © IEC:2009(E) 12.4 – 23 – Scan identification data types This subclause defines data types that are used to provide protocol specific scanning (see Table 12 and Table 13) The data types described in this subclause are used at following services: • scan service The data types described in this subclause are defined for the following namespace Namespace: hartscan Table 12 – Simple scan identification data types Data type Definition Description resultState enumeration ( provisional | final | error ) Identifies if the result is one of the provisional results or the final result of the split scan results configuredState enumeration ( configuredAndPhysicall yAvailable | | configuredAndNotPhysi callyAvailable | availableButNotConfigur ed | notApplicable ) A communication master shall indicate in this attribute, if the scan response is related to a detected physical device which is configured or unconfigured Table 13 – Structured scan identification data types Data type Definition Elementary data types IdAddress Multiplicity M [1 1] M [1 1] M [1 1] STRUCT hartident:busProtocol IdBusProtocolVersion Usage STRUCT hartident:shortAddress IdBusProtocol Description STRUCT hartident:universalCommandRevisionLevel IdManufacturer STRUCT hartident:manufacturerIdentificationCode IdTypeID M [1 1] M [1 1] M [1 1] M [1 1] STRUCT hartident:tag IdSerialNumber [1 1] STRUCT hartident:hardwareRevision IdTag M All elements with semantic meaning have a prefix “Id” for better identification STRUCT hartident:softwareRevision IdHardwareRevision [1 1] STRUCT hartident:deviceTypeID IdSoftwareRevision M All elements contain exactly one attribute each including the value of the scanned physical device STRUCT hartident:deviceID DeviceCommandRevision Level STRUCT DeviceFlag STRUCT hartident:deviceCommandRevisionLevel M [1 1] All elements without semantic prefix “Id” are Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 15/04/2010 02:01, Uncontrolled Copy, (c) BSI BS EN 62453-309:2009 62453-309 © IEC:2009(E) – 24 – Data type Definition Elementary data types hartident:deviceFlag ManufacturerSpecificExtension STRUCT ScanIdentification STRUCT ScanIdentifications 12.5 hartident:manufacturerSpecificExtension Description Usage Multiplicity M [1 1] M [1 1] transformed by XSL to name value pairs These elements contain exactly one attribute defined in IEC 62453-2, each including one value of the physical device All IEC 61784 CPF scan identification elements for one scanned physical device configuredState O [0 1] fdt:CommunicationError O [0 1] IdAddress M [1 1] IdBusProtocol M [1 1] IdBusProtocolVersion M [1 1] IdManufacturer M [1 1] IdTypeID M [1 1] IdSoftwareRevision M [1 1] IdHardwareRevision M [1 1] IdTag M [1 1] IdSerialNumber M [1 1] DeviceCommandRevisionLevel M [1 1] DeviceFlag M [1 1] ManufacturerSpecificExtension O [0 1] STRUCT Collection of ScanIdentifica tion elements fdt:protocolId M [1 1] resultState M [1 1] ScanIdentification O [0 *] Device type identification data types – provided by DTM This subclause defines data types that are used to provide protocol specific information for device types (see Table 14) The data types described in this subclause are used in the following services: • GetIdentificationInformation service The data types described in this subclause are defined for the following namespace Namespace: hartdevtype Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 15/04/2010 02:01, Uncontrolled Copy, (c) BSI BS EN 62453-309:2009 62453-309 © IEC:2009(E) – 25 – Table 14 – Structured device type identification data types Data type Definition Elementary data types IdBusProtocol IdBusProtocolVersion IdManufacturer IdTypeID IdSoftwareRevision IdHardwareRevision DeviceCommandRevisionLevel DeviceFlag ManufacturerSpecificExtension Description Usage Multiplicity STRUCT hartident:busProtocol O [0 1] hartident:RegExpr O [0 *] hartident:universalCommandRevisionLevel O [0 1] hartident:RegExpr O [0 *] STRUCT STRUCT hartident:manufacturerIdentificationCode O [0 1] hartident:RegExpr O [0 *] hartident:deviceTypeID O [0 1] hartident:RegExpr O [0 *] hartident:softwareRevision O [0 1] hartident:RegExpr O [0 *] hartident:hardwareRevision O [0 1] hartident:RegExpr O [0 *] STRUCT All elements contain exactly one attribute, each including the value of the scanned physical device All elements with semantic meaning have a prefix “Id” for better identification STRUCT STRUCT STRUCT hartident:deviceCommandRevisionLevel O [0 1] hartident:RegExpr O [0 *] hartident:deviceFlag O [0 1] hartident:RegExpr O [0 *] M [1 1] STRUCT STRUCT hartident:manufacturerSpecificExtension All elements without semantic prefix “Id” are transformed by XSL to name value pairs These elements contain exactly one attribute defined in IEC 62453-2 each including one value of the physical device Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 15/04/2010 02:01, Uncontrolled Copy, (c) BSI BS EN 62453-309:2009 62453-309 © IEC:2009(E) – 26 – Data type Definition Elementary data types DeviceIdentification DeviceIdentifications Description Usage Multiplicity STRUCT IEC 61784 CPF specific identification elements hartident:idDTMSupportLevel M [1 1] IdBusProtocol M [1 1] IdBusProtocolVersion M [1 1] IdManufacturer M [1 1] IdTypeID M [1 1] IdSoftwareRevision M [1 1] IdHardwareRevision M [1 1] DeviceCommandRevisionLevel M [1 1] DeviceFlag M [1 1] ManufacturerSpecificExtension O [0 *] STRUCT List of device identifications fdt:protocolId M [1 1] DeviceIdentification M [1 *] Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 15/04/2010 02:01, Uncontrolled Copy, (c) BSI BS EN 62453-309:2009 62453-309 © IEC:2009(E) – 27 – Bibliography [1] HCF SPEC-127 Revision 6.0, Universal Command Specification, 18 April 2001 [2] HCF SPEC-183 Revision 16.0, Common Tables Specification, 19 December 2005 [3] ISO/IEC 19501:2005, Information technology – Open Distributed Processing – Unified Modeling Language (UML) Version 1.4.2 _ Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 15/04/2010 02:01, Uncontrolled Copy, (c) BSI This page deliberately left blank Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 15/04/2010 02:01, Uncontrolled Copy, (c) BSI This page deliberately left blank Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 15/04/2010 02:01, Uncontrolled Copy, (c) BSI British Standards Institution (BSI) BSI is the independent national body responsible for preparing British Standards and other standards-related publications, information and services It presents the UK view on standards in Europe and at the international level It is incorporated by Royal Charter Revisions Information on standards British Standards are updated by amendment or revision Users of British Standards should make sure that they possess the latest amendments or editions It is the constant aim of BSI to improve the quality of our products and services We would be grateful if anyone finding an inaccuracy or ambiguity while using this British Standard would inform the Secretary of the technical committee responsible, the identity of which can be found on the inside front cover Tel: +44 (0)20 8996 9001 Fax: +44 (0)20 8996 7001 BSI provides a wide range of information on national, European and international standards through its Knowledge Centre BSI offers Members an individual updating service called PLUS which ensures that subscribers automatically receive the latest editions of standards Tel: +44 (0)20 8996 7669 Fax: +44 (0)20 8996 7001 Email: plus@bsigroup.com Buying standards You may buy PDF and hard copy versions of standards directly using a credit card from the BSI Shop on the website www.bsigroup.com/shop In addition all orders for BSI, international and foreign standards publications can be addressed to BSI Customer Services Tel: +44 (0)20 8996 9001 Fax: +44 (0)20 8996 7001 Email: orders@bsigroup.com In response to orders for international standards, it is BSI policy to supply the BSI implementation of those that have been published as British Standards, unless otherwise requested Tel: +44 (0)20 8996 7004 Fax: +44 (0)20 8996 7005 Email: knowledgecentre@bsigroup.com Various BSI electronic information services are also available which give details on all its products and services Tel: +44 (0)20 8996 7111 Fax: +44 (0)20 8996 7048 Email: info@bsigroup.com BSI Subscribing Members are kept up to date with standards developments and receive substantial discounts on the purchase price of standards For details of these and other benefits contact Membership Administration Tel: +44 (0)20 8996 7002 Fax: +44 (0)20 8996 7001 Email: membership@bsigroup.com Information regarding online access to British Standards via British Standards Online can be found at www.bsigroup.com/BSOL Further information about BSI is available on the BSI website at www.bsigroup.com/standards Copyright Copyright subsists in all BSI publications BSI also holds the copyright, in the UK, of the publications of the international standardization bodies Except as permitted under the Copyright, Designs and Patents Act 1988 no extract may be reproduced, stored in a retrieval system or transmitted in any form or by any means – electronic, photocopying, recording or otherwise – without prior written permission from BSI This does not preclude the free use, in the course of implementing the standard of necessary details such as symbols, and size, type or grade designations If these details are to be used for any other purpose than implementation then the prior written permission of BSI must be obtained Details and advice can be obtained from the Copyright & Licensing Manager Tel: +44 (0)20 8996 7070 Email: copyright@bsigroup.com BSI Group Headquarters 389 Chiswick High Road London W4 4AL UK Tel +44 (0)20 8996 9001 Fax +44 (0)20 8996 7001 www.bsigroup.com/standards raising standards worldwide™