www bzfxw com Connectors for electronic equipment – Product requirements –– Part 3 001 Rectangular connectors — Blank detail specification BS EN 61076 3 001 2008 raising standards worldwide™ NO COPYIN[.]
BS EN 61076-3-001:2008 BSI British Standards Connectors for electronic equipment – Product requirements –– Part 3-001: Rectangular connectors — Blank detail specification NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW raising standards worldwide™ BRITISH STANDARD BS EN 61076-3-001:2008 National foreword This British Standard is the UK implementation of EN 61076-3-001:2008 It is identical to IEC 61076-3-001:2008 It supersedes BS EN 61076-3001:2000 which is withdrawn The UK participation in its preparation was entrusted to Technical Committee EPL/48, Electromechanical components and mechanical structures for electronic equipment A list of organizations represented on this committee can be obtained on request to its secretary This publication does not purport to include all the necessary provisions of a contract Users are responsible for its correct application © BSI 200 ISBN 978 580 53940 ICS 31.220.10 Compliance with a British Standard cannot confer immunity from legal obligations This British Standard was published under the authority of the Standards Policy and Strategy Committee on 28 February 2009 Amendments issued since publication Amd No Date Text affected BS EN 61076-3-001:2008 EUROPEAN STANDARD EN 61076-3-001 NORME EUROPÉENNE November 2008 EUROPÄISCHE NORM ICS 31.220.10 Supersedes EN 61076-3-001:2000 English version Connectors for electronic equipment Product requirements Part 3-001: Rectangular connectors Blank detail specification (IEC 61076-3-001:2008) Connecteurs pour équipements électroniques Exigences de produit Partie 3-001: Connecteurs rectangulaires Spécification particulière-cadre (CEI 61076-3-001:2008) Steckverbinder für elektronische Einrichtungen Produktanforderungen Teil 3-001: Rechteckige Steckverbinder Vordruck für Bauartspezifikation (IEC 61076-3-001:2008) This European Standard was approved by CENELEC on 2008-10-01 CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member This European Standard exists in three official versions (English, French, German) A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom CENELEC European Committee for Electrotechnical Standardization Comité Européen de Normalisation Electrotechnique Europäisches Komitee für Elektrotechnische Normung Central Secretariat: rue de Stassart 35, B - 1050 Brussels © 2008 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members Ref No EN 61076-3-001:2008 E BS EN 61076-3-001:2008 EN 61076-3-001:2008 –2– Foreword The text of document 48B/1880/FDIS, future edition of IEC 61076-3-001, prepared by SC 48B, Connectors, of IEC TC 48, Electromechanical components and mechanical structures for electronic equipment, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as EN 61076-3-001 on 2008-10-01 This European Standard supersedes EN 61076-3-001:2000 EN 61076-3-001:2008 includes EN 61076-3-001:2000: the following significant technical changes with respect to – this European Standard no longer includes the quality assessment procedures As described in EN 61076-1 and EN 62197-1, a new document structure has been established EN 61076-3-001 has been revised to match with this updated structure; – Subclause 2.2 Systems of levels has been introduced; – Subclause 2.5 IEC type designation has been removed following the decision according to 14.2 of the Berlin IEC/SC 48B Plenary meeting minutes (48B/1732/RM); – Clauses Dimensional Information and Characteristics have been added; – old Subclauses 4.2 to 4.4 have been moved to new Subclauses 5.3 to 5.5; – Table – Number of test specimens and contacts has been inserted; – test groups have been rearranged Test group HP has been added The following dates were fixed: – latest date by which the EN has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2009-07-01 – latest date by which the national standards conflicting with the EN have to be withdrawn (dow) 2011-10-01 Annex ZA has been added by CENELEC Endorsement notice The text of the International Standard IEC 61076-3-001:2008 was approved by CENELEC as a European Standard without any modification BS EN 61076-3-001:2008 EN 61076-3-001:2008 –3– Annex ZA (normative) Normative references to international publications with their corresponding European publications The following referenced documents are indispensable for the application of this document For dated references, only the edition cited applies For undated references, the latest edition of the referenced document (including any amendments) applies NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies Publication Year Title EN/HD Year IEC 61076-1 2006 Connectors for electronic equipment Product requirements Part 1: Generic specification EN 61076-1 2006 IEC 61076-3 2008 Connectors for electronic equipment Product requirements Part 3: Rectangular connectors - Sectional specification EN 61076-3 2008 IEC 62197-1 2006 Connectors for electronic equipment Quality assessment requirements Part 1: Generic specification EN 62197-1 2006 IEC Guide 109 - 1) Environmental aspects - Inclusion in electrotechnical product standards - - IEC Guide 114 - 1) Environmentally conscious design Integrating environmental aspects into design and development of electrotechnical products - 1) Undated reference ｗｗｗ．ｂｚｆｘｗ．ｃｏｍ - BS EN 61076-3-001:2008 –2– 61076-3-001 © IEC:2008 CONTENTS INTRODUCTION General information 1.1 Scope 1.2 Normative references 11 Technical information 13 2.1 2.2 Terms and definitions 13 Systems of levels 13 2.2.1 Performance levels 13 2.2.2 Compatibility levels, according to IEC 61076-1:2006 13 2.3 Classification into climatic categories 13 2.4 Clearance and creepage distances 15 2.5 Current-carrying capacity 15 2.6 Marking 15 Dimensional information 17 3.1 3.2 General 17 Isometric view and common features 17 3.2.1 Common features 19 3.2.2 Reference system 19 3.3 Engagement (mating) information 21 3.3.1 Engaging (mating) direction 21 3.3.2 Perpendicular to the engaging (mating) direction 21 3.3.3 Inclination 21 3.4 Fixed connectors 21 3.4.1 Dimensions 21 3.4.2 Terminations 21 3.5 Free connectors 23 3.5.1 Dimensions 23 3.5.2 Terminations 23 3.6 Accessories 23 3.7 Mounting information for connectors 23 3.7.1 Mounting on panels 25 3.8 Gauges 25 3.8.1 Sizing gauges and retention force gauges 25 3.8.2 Mechanical function, engaging/separating/insertion/withdrawal force gauges 27 3.8.3 Probes 27 3.8.4 Contact resistance gauge 27 3.8.5 Test panel (for voltage proof test) 27 3.8.6 Test panel (for EMC/crosstalk, etc.) 27 Characteristics 29 ｗｗｗ．ｂｚｆｘｗ．ｃｏｍ 4.1 4.2 4.3 4.4 General 29 Pin assignment and other definitions 29 Classification into climatic categories 29 Electrical characteristics 29 4.4.1 Creepage and clearance distances 29 BS EN 61076-3-001:2008 61076-3-001 © IEC:2008 4.5 4.6 4.7 Test 5.1 –3– 4.4.2 Voltage proof 31 4.4.3 Current-carrying capacity 31 4.4.4 Contact and shield resistance 31 4.4.5 Insulation resistance 31 4.4.6 Impedance 33 4.4.7 Transmission characteristics 33 Mechanical characteristics 37 4.5.1 Mechanical operation 37 4.5.2 Effectiveness of connector coupling devices 37 4.5.3 Engaging and separating forces (or insertion and withdrawal forces) 37 4.5.4 Contact retention in insert 37 4.5.5 Polarizing and coding method 37 Other characteristics 39 4.6.1 Shock and vibration (method either random or sine) 39 4.6.2 Degree of protection provided by enclosures (IP-code) 39 4.6.3 Screen and shielding properties 39 Environmental aspects 41 4.7.1 Marking of insulation material (plastics) 41 4.7.2 Design/use of material 41 schedule 43 General 43 5.1.1 Climatic category 43 5.1.2 Creepage and clearance distances 45 5.1.3 Arrangement for contact resistance measurement 45 5.1.4 Arrangement for dynamic stress tests 45 5.1.5 Arrangement for testing static load, axial 45 5.1.6 Wiring of specimens 45 Test schedules 47 5.2.1 Basic (minimum) test schedule 47 5.2.2 Full test schedule 53 Test procedures and measuring methods 77 Pre-conditioning 77 Wiring and mounting of specimens 77 5.5.1 Wiring 77 5.5.2 Mounting 77 (normative) New tests and additional test phases 78 ｗｗｗ．ｂｚｆｘｗ．ｃｏｍ 5.2 5.3 5.4 5.5 Annex A Table – Performance levels 13 Table – Isometric view and common features 17 Table – Performance levels, example 28 Table – Performance levels 29 Table – Creepage and clearance distances 29 Table – Performance levels 43 Table – Creepage and clearance distances 45 Table – Tests, example 46 Table – Basic tests 47 Table – Number of test specimens and contacts 53 BS EN 61076-3-001:2008 –4– 61076-3-001 © IEC:2008 Table 10 – Test group P 53 Table 10 – Test group P (continued) 55 Table 11 – Test group AP 55 Table 11 – Test group AP (continued) 59 Table 12 – Test group BP 61 Table 12 – Test group BP (continued) 63 Table 13 – Test group CP 65 Table 14 – Test group DP 67 Table 15 – Test group EP 69 Table 16 – Test group FP 71 Table 17 – Test group GP 73 Table 18 – Test group HP 75 Table 19 – Test group JP 77 Table 20 – Test group KP 77 ｗｗｗ．ｂｚｆｘｗ．ｃｏｍ BS EN 61076-3-001:2008 61076-3-001 © IEC:2008 –7– INTRODUCTION This blank detail product specification is a supplementary document to the sectional product specification IEC 61076-3 and contains requirements for style, layout and content of detail product specifications for rectangular connectors It is to be used in conjunction with the following publications: IEC 61076-1 and IEC 61076-3 for product requirements as well as IEC 62197-1 for quality requirements The main content of this blank detail product specification is divided into two parts: on one page, the example for a blank detail product specification, on the other page, the guidance notes referring to the example The guidance notes have the same numbering as the relevant paragraphs of the example pages The sample pages can be used like a template when preparing a detail product specification within the scope of this document This document is not intended to replace the templates and guidance notes of IEC, but to assist in their application All users are reminded to adhere to relevant directives and guidelines of the IEC when preparing a standard NOTE A detail quality specification IEC 62197-3-1xx should be prepared, based on the blank detail quality specification for rectangular connectors future IEC 62197-3-001 and its references and should be used in conjunction with the detail product specification IEC 61076-3-1xx NOTE The quality assessment requirements for connectors according to the IEC 61076 series are detailed in IEC 62197-1 ｗｗｗ．ｂｚｆｘｗ．ｃｏｍ BS EN 61076-3-001:2008 –8– 61076-3-001 © IEC:2008 Guidance notes The following pages give a recommended layout of a detail product specification The contents of this page give guidance on the information which should, wherever possible, be given on the front page of a detail product specification (see IEC Guide 102) For the scope and definition of a detail product specification, see 1.2.3 of IEC 61076-1:2006 The numbers between brackets on the front page of the detail product specification correspond to the following information Identification of the detail product specification [1] The International Electrotechnical Commission or the national standards organization under whose authority the detail product specification is drafted It shall also be stated where the detail product specification may be obtained [2] The IECQ/IEC number of the detail product specification and date of issue [3] The IECQ/IEC number and issue number of the generic and the sectional specifications [4] The national number of the detail product specification, if it differs from the IECQ/IEC number Identification of the connector [5] A short description of the type of connector [6] Information on the typical construction of the connector, for example, it should be stated whether the connector is suitable for mounting on printed boards [7] Outline drawing, preferably of isometric or similar projection, from which the connector may be clearly identified [8] Information on performance level(s) and assessment level(s) specified in the document, if applicable [9] Reference data on the most important properties, to allow comparison between the various connector types NOTE ｗｗｗ．ｂｚｆｘｗ．ｃｏｍ It may be convenient to give some of this information in tabular form