BS EN 60335-2-13:2010+A11:2012 BSI Standards Publication Household and similar electrical appliances — Safety Part 2-13: Particular requirements for deep fat fryers, frying pans and similar appliances BS EN 60335-2-13:2010+A11:2012 BRITISH STANDARD National foreword This British Standard is the UK implementation of EN 60335-2-13:2010+A11:2012 It is derived from IEC 60335-2-13:2009 It supersedes BS EN 60335-2-13:2010, which will be withdrawn on July 2015 Where a common modification has been introduced by amendment, the tags carry the number of the amendment For example, the common modifications introduced by CENELEC amendment A11 are indicated by The UK participation in its preparation was entrusted by Technical Committee CPL/61, Safety of household and similar electrical appliances, to Subcommittee CPL/61/7, Safety of electrical appliances – Heated appliance group A list of organizations represented on this subcommittee can be obtained on request to its secretary This publication does not purport to include all the necessary provisions of a contract Users are responsible for its correct application © The British Standards Institution 2012 Published by BSI Standards Limited 2012 ISBN 978 580 78602 ICS 97.040.20; 97.040.50 Compliance with a British Standard cannot confer immunity from legal obligations This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 May 2010 Amendments/corrigenda issued since publication Date Text affected 31 October 2012 Implementation of CENELEC amendment A11:2012 BS EN 60335-2-13:2010 EUROPEAN STANDARD 60335-2-13 EN 60335-2-13:2012+A11 NORME EUROPÉENNE EUROPÄISCHE NORM February 2010 August 2012 ICS 13.120; 97.040.50 Supersedes EN 60335-2-13:2003 + A1:2004 + A2:2008 English version Household and similar electrical appliances Safety Part 2-13: Particular requirements for deep fat fryers, frying pans and similar appliances (IEC 60335-2-13:2009) Appareils électrodomestiques et analogues - Sécurité Partie 2-13: Règles particulières pour les friteuses, les poêles frire et appareils analogues (CEI 60335-2-13:2009) Sicherheit elektrischer Geräte für den Hausgebrauch und ähnliche Zwecke Teil 2-13: Besondere Anforderungen für Frittiergeräte, Bratpfannen und ähnliche Geräte (IEC 60335-2-13:2009) This European Standard was approved by CENELEC on 2010-02-01 CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member This European Standard exists in three official versions (English, French, German) A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom CENELEC European Committee for Electrotechnical Standardization Comité Européen de Normalisation Electrotechnique Europäisches Komitee für Elektrotechnische Normung Central Secretariat: Avenue Marnix 17, B - 1000 Brussels © 2010 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members Ref No EN 60335-2-13:2010 E BS ENBS 60335-2-13:2010+A11:2012 EN 60335-2-13:2010 EN 60335-2-13:2010+A11:2012 EN 60335-2-13:2010 – -– - Foreword The text of document 61/3873/FDIS, future edition of IEC 60335-2-13, prepared by the IEC Technical Committee 61, Safety of household and similar electrical appliances, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as EN 60335-2-13 on 2010-02-01 This European Standard supersedes EN 60335-2-13:2003 + A1:2004 + A2:2008 The principal changes in EN 60335-2-13:2010 as compared with EN 60335-2-13:2003 are as follows (minor changes are not listed): – the scope is changed to cover household and similar use, – additional instructions are added to reflect the content of the scope (7.12) Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights CEN and CENELEC shall not be held responsible for identifying any or all such patent rights The following dates were fixed: – latest date by which the EN has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2010-11-01 – date on which national standards conflicting with the EN have to be withdrawn (dow) 2015-02-01 This Part has to be used in conjunction with EN 60335-1, Household and similar electrical appliances – Safety – Part 1: General requirements It was established on the basis of the 2002 edition of that standard Amendments and revisions of Part have also to be taken into account and the dates when such changes become applicable will be stated in the relevant amendment or revision of Part This Part supplements or modifies the corresponding clauses of EN 60335-1, so as to convert it into the European Standard: Safety requirements for deep fat fryers, frying pans and similar appliances When a particular subclause of Part is not mentioned in this Part 2, that subclause applies as far as is reasonable When this standard states "addition", "modification" or "replacement", the relevant text of Part is to be adapted accordingly NOTE The following numbering system is used: – subclauses, tables and figures that are numbered starting from 101 are additional to those in Part 1; – unless notes are in a new subclause or involve notes in Part 1, they are numbered starting from 101, including those in a replaced clause or subclause; – additional annexes are lettered AA, BB, etc.; – subclauses, notes and annexes that are additional to those in the IEC standard are prefixed with the letter Z NOTE – The following print types are used: requirements: in roman type; – test specifications: in italic type; – notes: in small roman type Words in bold in the text are defined in Clause When a definition concerns an adjective, the adjective and the associated noun are also in bold There are no special national conditions causing a deviation from this European Standard, other than those listed in Annex ZA to EN 60335-1 There are no national deviations from this European Standard, other than those listed in Annex ZB to EN 60335-1 p NOTE In this document, p is used in the margin to indicate instructions for preparing the printed version EN 60335-2-13:2010/A11:2012 BS EN 60335-2-13:2010+A11:2012 BS EN 60335-2-13:2010 EN 60335-2-13:2010+A11:2012 –– 23 –– -3- EN 60335-2-13:2010 Foreword to amendment A11 Introduction Foreword p Add: This document (EN 60335-2-13:2010/A11:2012) has been prepared by CLC/TC 61 "Safety of household and similar electrical appliances" An investigation by CENELEC TC 61 has shown that all risks from products within the scope of this standard are fully covered by the Low Voltage Directive, 2006/95/EC For products having mechanical The following dates are fixed: moving parts, a risk assessment in accordance with the Machinery Directive, 2006/42/EC, has shown that the risks are mainly of electrical origin and consequently this directive is not applicable However, the 2013-07-09 • essential latest date by which this document to be relevant safety requirements of thehas Machinery Directive(dop) are covered by this standard together implemented at national level by publication of an with the principal objectives of the Low Voltage Directive identical national standard or by endorsement • latest date by which the national standards conflicting with this document have to be withdrawn (dow) 2015-07-09 Endorsement notice Attention is drawn to the possibility that some of the elements of this document may be the subject of The text rights of the CENELEC International[and/or Standard IECshall 60335-2-13:2009 was approved CENELEC European patent CEN] not be held responsible for by identifying anyasora all such Standard without any modification patent rights This amendment supplements or modifies the corresponding clauses of EN 60335-1:2012 and EN 60335-2-13:2010 Bibliography This standard covers the Principle Elements of the Safety Objectives for Electrical Equipment Designed for Use within Certain Voltage Limits (LVD - 2006/95/EC) BS EN 60335-2-13:2010 p Add the following notes to the standards mentioned: -3EN 60335-2-13:2010 IEC 60335-2-37 NOTE Harmonized as EN 60335-2-37 IEC 60335-2-39 ISO 13732-1 p Add: NOTE Harmonized as EN 60335-2-39 Introduction NOTE Harmonized as EN ISO 13732-1 An investigation by CENELEC TC 61 has shown that all risks from products within the scope of this standard are fully covered by the Low Voltage Directive, 2006/95/EC For products having mechanical moving parts, a risk assessment in accordance with the Machinery Directive, 2006/42/EC, has shown that the risks are mainly of electrical origin and consequently this directive is not applicable However, the relevant essential safety requirements of the Machinery Directive are covered by this standard together with the principal objectives of the Low Voltage Directive Endorsement notice The text of the International Standard IEC 60335-2-13:2009 was approved by CENELEC as a European Standard without any modification Bibliography p Add the following notes to the standards mentioned: IEC 60335-2-37 NOTE Harmonized as EN 60335-2-37 IEC 60335-2-39 NOTE Harmonized as EN 60335-2-39 ISO 13732-1 NOTE Harmonized as EN ISO 13732-1 BS EN 60335-2-13:2010+A11:2012 EN 60335-2-13:2010+A11:2012 –4– –2– BS EN 60335-2-13:2010 60335-2-13 © IEC:2009(E) CONTENTS INTRODUCTION 65 Scope .76 Normative references .76 Definitions 77 General requirement .87 General conditions for the tests 87 Classification 87 Marking and instructions 87 Protection against access to live parts 99 Starting of motor-operated appliances 99 10 Power input and current 99 11 Heating 99 11 12 Void 10 11 13 Leakage current and electric strength at operating temperature 10 11 14 Transient overvoltages 10 11 15 Moisture resistance 10 11 16 Leakage current and electric strength 11 12 17 Overload protection of transformers and associated circuits 11 12 18 Endurance 11 12 19 Abnormal operation 11 13 20 Stability and mechanical hazards 12 13 21 Mechanical strength 12 13 22 Construction 12 13 23 Internal wiring 12 13 24 Components 12 13 25 Supply connection and external flexible cords 13 14 26 Terminals for external conductors 13 14 27 Provision for earthing 13 14 28 Screws and connections 13 14 29 Clearances, creepage distances and solid insulation 13 14 30 Resistance to heat and fire 13 14 31 Resistance to rusting 14 32 Radiation, toxicity and similar hazards 14 15 Annexes 15 16 Bibliography 16 –5– –6– BS EN 60335-2-13:2010+A11:2012 BS EN 60335-2-13:2010 EN 60335-2-13:2010+A11:2012 60335-2-13 © IEC:2009(E) INTRODUCTION It has been assumed in the drafting of this International Standard that the execution of its provisions is entrusted to appropriately qualified and experienced persons This standard recognizes the internationally accepted level of protection against hazards such as electrical, mechanical, thermal, fire and radiation of appliances when operated as in normal use taking into account the manufacturer's instructions It also covers abnormal situations that can be expected in practice and takes into account the way in which electromagnetic phenomena can affect the safe operation of appliances This standard takes into account the requirements of IEC 60364 as far as possible so that there is compatibility with the wiring rules when the appliance is connected to the supply mains However, national wiring rules may differ If an appliance within the scope of this standard also incorporates functions that are covered by another part of IEC 60335, the relevant part is applied to each function separately, as far as is reasonable If applicable, the influence of one function on the other is taken into account When a part standard does not include additional requirements to cover hazards dealt with in Part 1, Part applies NOTE This means that the technical committees responsible for the part standards have determined that it is not necessary to specify particular requirements for the appliance in question over and above the general requirements This standard is a product family standard dealing with the safety of appliances and takes precedence over horizontal and generic standards covering the same subject NOTE Horizontal and generic standards covering a hazard are not applicable since they have been taken into consideration when developing the general and particular requirements for the IEC 60335 series of standards For example, in the case of temperature requirements for surfaces on many appliances, generic standards, such as ISO 13732-1 for hot surfaces, are not applicable in addition to Part or part standards An appliance that complies with the text of this standard will not necessarily be considered to comply with the safety principles of the standard if, when examined and tested, it is found to have other features that impair the level of safety covered by these requirements An appliance employing materials or having forms of construction differing from those detailed in the requirements of this standard may be examined and tested according to the intent of the requirements and, if found to be substantially equivalent, may be considered to comply with the standard BS EN 60335-2-13:2010 60335-2-13 © IEC:2009(E) BS EN 60335-2-13:2010+A11:2012 BS EN 60335-2-13:2010 EN 60335-2-13:2010+A11:2012 60335-2-13HOUSEHOLD © IEC:2009(E) –7– –6– AND SIMILAR– 7ELECTRICAL APPLIANCES – – SAFETY – 3– EN 60335-2-13:2010/A11:2012 HOUSEHOLD AND SIMILAR– ELECTRICAL APPLIANCES – Part 2-13: Particular requirements for deep fat fryers, SAFETY – frying pans and similar appliances BS EN 60335-2-13:2010 Part 2-13: Particular requirements for deep fat fryers, 7– frying pans and–similar appliances 60335-2-13 © IEC:2009(E) Scope HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES – SAFETY – Scope Replacement: This This clause is is replaced by the following clauseofofPart Part1 replaced by the following Scope Part 2-13: Particular requirements for deep fat fryers, This European Standard deals withpans the safety of electricappliances deep fat fryers having a recommended frying and similar This International Standard deals 5with thepans, safety ofand electric deep fat infryers having a maximum quantity of oil not exceeding l, frying woks other appliances which oil is used This clause of Part is replaced by of theoil following recommended maximum quantity not exceeding l, frying pans, woks and other for cooking, and intended for household use and similar use, their rated voltage being not more than appliances in which oil is used for cooking, and intended for household use and similar use, 250 V This International Standard deals with their rated voltage being not more than 250the V safety of electric deep fat fryers having a recommended maximum quantity of oil in notshops exceeding l, frying for pans, woks and other Appliances intended to be used by laymen and other premises normal housekeeping appliances in which oil is used for cooking, and intended for household use and similar Scope purposes, are within the scope of this European Standard Appliances intended for normal household and similar use and that may also be useduse, by their rated not industry more than 250onV farms are within the scope of this standard laymen in voltage shops, being in light and NOTE Z101 of appliance for household environment are appliances for typical housekeeping functions used in the However, ifExamples appliance is by intended to users be forused professionally to process food for This clause ofthe Partthat may is replaced following household environment also be used bythe non-expert typical housekeeping functions: Appliances for normal household and similar use and may also useduse by commercial intended consumption, the appliance is not considered to be forthat household andbe similar – in shops other similar workingindustry environments; laymen in and shops, in light and on farms are within the scope of this standard only This International Standard deals with the safety of electric deep fat fryers having a – in farm houses; However, if the appliance is intended to be used professionally to process food for recommended maximum quantity of oil not exceeding l, frying pans, woks and other commercial consumption, appliance is environments; not considered be for household and similar use – by clients motels andthe other residential type As far as inin ishotels, practicable, this standard deals with theto hazards presented by appliances which oil is used for cooking, and intended forcommon household use and similar use, only appliances that arebeing encountered all persons – inrated bed andvoltage breakfast type environments their not morebythan 250 V in and around the home However, in general, it does not take into account NOTEfar Z102as Household environments include the dwelling and its with associated the garden, etc presented by As is practicable, this standard deals the buildings, common hazards Appliances intended for normal household and similar use and that may also be used by – personsthat (including children) whose appliances are encountered by all persons in and around the home However, in general, laymen in isshops, in light industry and on farms are within the scope of this standard As far as practicable, this European Standard deals with the common hazards presented by it does not take into account • physical, or mental or used and However, if the appliance is be professionally to process food for appliances that aresensory encountered by intended all capabilities; persons to in household similar environments commercial consumption, the – persons (including children) whose is not considered to be for household and similar use • lack of experience and appliance knowledge However, in general, it does not take into account only • physical, or mental capabilities; or without supervision or instruction; prevents themsensory from using the appliance safely – children playing with the appliance, – children playing with the appliance •far lack experience and knowledge As as of is practicable, this standard deals with the common hazards presented by appliances that are encountered by all persons in and around the home However, in general, – prevents the ofthem the appliance young young children, using safely without supervision or instruction; NOTE 101use isfrom drawn to by thethe factappliance thatand very it does notAttention take into account – children playing withtothe – intended bebyappliance used in children vehicles orwithout on board ships or aircraft, additional requirements may be – for theappliances use of the appliance older supervision, – necessary; persons (including children) whose NOTE 101 Attention is drawn to the fact that – many countries additional requirements arethe specified by ofthe health authorities, the national – in•user maintenance by or children, thenational appliance physical, sensory mentalincluding capabilities;cleaning or authorities responsible of labour similarships authorities for appliances intendedfor to the be protection used in vehicles or and on board or aircraft, additional requirements may be necessary; lack of experience and knowledge It is •recognized that very vulnerable people may have needs beyond the level addressed in this NOTE 102 This standard does not apply to – in manyStandard countries additional requirements are specified by the national health authorities, the national European prevents them using the(IEC appliance without supervision or instruction; – deep fat fryers for from commercial use 60335-2-37); authorities responsible for the protection of laboursafely and similar authorities – – children playing withdoes the appliance Thiscommercial European Standard not apply to 60335-2-39); – multi-purpose cooking pans (IEC NOTE 102 This standard does not apply to – appliances intended to betoused in locations where special conditions prevail, such as the presence of a NOTE 101fatfat Attention drawn the that – deep fryers foris commercial usefact (IEC 60335-2-37); – corrosive deep for commercial use (EN 60335-2-37), orfryers explosive atmosphere (dust, vapour or gas) – for appliances intended tocooking be usedpans in vehicles or on board ships or aircraft, additional requirements may be commercial multi-purpose (IEC 60335-2-39); necessary; – appliances commercial multi-purpose cooking pans (EN 60335-2-39), – intended to be used in locations where special conditions prevail, such as the presence of a Normative references – in many or countries additional requirements areorspecified by the national health authorities, the national corrosive explosive atmosphere (dust, vapour gas) – authorities appliances intendedforto used in locations whereauthorities special conditions prevail, such as the responsible thebe protection of labour and similar a corrosive or explosive atmosphere (dust, vapour or gas) This presence clause ofofPart is applicable NOTENormative 102 This standard does not apply to references NOTE Z103fat fryers Attention is drawn to the fact(IEC that 60335-2-37); – deep for commercial use – for appliances intended to be used in vehicles or on board ships or aircraft, additional requirements may be necessary, Definitions This clause ofmulti-purpose Part is applicable – commercial cooking pans (IEC 60335-2-39); – – in many countries additional requirements are specified by the conditions national health authorities, thethe national authorities appliances intended to be used in locations where special prevail, such as presence of a Definitions Marking and instructions Normative references – the substance of “CAUTION: Hot surface”, or Definitions responsible for the protection of labour(dust, and similar authorities explosive vapour gas). Thiscorrosive clause or of Part isatmosphere applicable except asorfollows This clause of Part is applicable except as follows 7.1 Add: This clause of Part is applicable e When the provisions of footnote to Table Z101 apply, the appliance shall be marked with corrosive or explosive atmosphere (dust, vapour or gas) Normative references This clause of Part is applicable –7– –8– 3.1.9Definitions Replacement: normal operation –8– This clause of Part is applicable except as follows operation of the appliance under the following conditions: BS EN 60335-2-13:2010+A11:2012 BS EN 60335-2-13:2010 EN 60335-2-13:2010+A11:2012 60335-2-13 © IEC:2009(E) BS EN 60335-2-13:2010 60335-2-13 © IEC:2009(E) 3.1.9 Replacement: Deep fat fryers are operated filled with sunflower oil to the minimum oil level marked on the normal operation appliance operation of the appliance under the following conditions: Frying pans are operated filled with frying oil to a height of 10 mm above the highest point of Deep fat fryers are until operated filled with sunflower to the250 minimum oil centre level marked on the the heated surface the temperature of the oil oil attains °C at the of the heated appliance surface The temperature of the oil is maintained at 250 °C ± 15 °C, or at the highest temperature allowed by the thermostat if this is lower If the appliance does not have a thermostat, the operated temperature is maintained by to switching and the off highest point of Frying pans are filled with frying oil a heightthe of supply 10 mm on above the heated surface until the temperature of the oil attains 250 °C at the centre of the heated surface oil isof maintained 250 °Cas±specified 15 °C, or the pans highest Woks areThe filledtemperature with frying oiloftothe a depth 10 mm and at operated for at frying temperature allowed by the thermostat if this is lower If the appliance does not have a thermostat, the temperature is maintained by switching the supply on and off General requirement Woks are filled with frying oil to a depth of 10 mm and operated as specified for frying pans This clause of Part is applicable General requirement General conditions for the tests This clause of Part is applicable This clause of Part is applicable except as follows 5.2 General Addition:conditions for the tests NOTEclause 101 If the test of115.101 has to be except carried out, additional samples are required This of Part is applicable as three follows 5.101Addition: Deep fat fryers that can also be used as frying pans are tested as deep fat fryers or as 5.2 frying pans, whichever is more unfavourable NOTE 101 If the test of 15.101 has to be carried out, three additional samples are required NOTE Deep fat fryers incorporating heating elements that not project into the oil container, and are not marked with the minimum oil fryers level, are considered to be be usable as frying 5.101 Deep fat that can also used as fryingpans pans are tested as deep fat fryers or as frying pans, whichever is more unfavourable Classification NOTE Deep fat fryers incorporating heating elements that not project into the oil container, and are not marked with the minimum oil level, are considered to be usable as frying pans This clause of Part is applicable Classification Marking and instructions This clause of Part is applicable This clause of Part is applicable except as follows 7.1 Marking Addition: and instructions Deepclause fat fryers shall beapplicable marked with the as maximum This of Part is except follows oil level They shall also be marked with the minimum oil level, unless they can be used as frying pans 7.1 Addition: Appliances intended to be partially eimmersed in water for cleaning shall be marked with the When the provisions footnote Table Z101 apply, the appliance Deep fat fryers shall be of marked maximum oil level They shallshall alsobebemarked markedwith with maximum level of immersion and withtothe substance of the following: the minimum oil level, unless they can be used as frying pans – the substance of “CAUTION: Hot surface”, or EN 60335-2-13:2010/A11:2012 Do not immerse beyond this level Appliances intended to be partially immersed in water for cleaning shall be marked with the – symbol IEC 60417-5041 maximum level of immersion and with the substance of the following: The warning shall be put on the surface of the appliance having the highest temperature and shall be Do notnormal immerse beyond this visible during operation level 7 Marking and instructions BS ENThis 60335-2-13:2010+A11:2012 clause of Part is applicable except as follows BS EN 60335-2-13:2010 –8– EN 60335-2-13:2010+A11:2012 60335-2-13 © IEC:2009(E) 7.1 Addition: –9– 7.12 Addition: Deep fat fryers shall be marked with the maximum oil level They shall also be marked with EN – – EN 60335-2-13:2010/A11:2012 60335-2-13:2010/A11:2012 –4 4as – frying pans the minimum oil level, unless they can be used The instructions for appliances incorporating an appliance inlet, and intended to be partially or completely water for cleaning, state for thatcleaning the connector be removed Appliances immersed intended toin be partially immersedshall in water shall bemust marked with the before thelevel appliance is cleaned andthethat the appliance inlet must be dried before the maximum of immersion and with substance of the following: – symbol symbol IEC 60417-5041 – IEC 60417-5041 appliance is used again The shall be the of The warning warning shall be put put on on the surface surface of the the appliance appliance having having the the highest highest temperature temperature and and shall shall be be Do not immerse beyond this level visible during normal operation visible during normal operation The instructions for portable deep fat fryers and other appliances not intended to be immersed in water for cleaning shall state that the appliance must not be immersed 7.6 7.6 Add: Add: NOTE 101 cleaning Portable frying pans are considered to be appliances that are intended to be immersed in water for [symbol Caution, [symbol IEC IEC 60417-5041] 60417-5041] Caution, hot hot surface surface The instructions for appliances intended to be used with a connector incorporating a thermostat shall state that only the appropriate connector must be used 7.12 7.12 Replace Replace the the paragraph paragraph of of Part Part 1 beginning beginning with with “This “This appliance appliance can can be be used used by by children…” children…” by by the following: the following: The instructions shall include details on how to clean surfaces in contact with food or oil – – This This appliance appliance shall shall not not be be used used by by children children from from 0 year year to to 8 years years This This appliance appliance can can be be used used by by Thechildren instructions shall state that the appliance is not intended to be operated by means of an aged from years and above if they are continuously supervised This appliance be children aged from years and above if they are continuously supervised This appliance can can be external or a separate remote-control system used by with physical, or used timer by people people with reduced reduced physical, sensory sensory or mental mental capabilities capabilities or or lack lack of of experience experience and and knowledge if they have been given supervision or instruction concerning use of the knowledge if they have been given supervision or instruction concerning use of the appliance appliance in in a a Keep the appliance appliance and and its its cord cord out out of of reach reach of of safe way and and shall understand the hazards involved Thesafe instructions includethe thehazards substance of the following: Keep the way understand involved children aged aged less less than than 8 years years Cleaning Cleaning and and user user maintenance maintenance shall shall not not be be made made by by children children children This appliance is intended to be used in household and similarwith applications suchany) as: – Cooking appliances BS 60335-2-13:2010 – EN Cooking appliances should should be be positioned positioned in in a a stable stable situation situation with the the handles handles (if (if any) positioned positioned to spillage of hot to avoid avoid spillage of the the hot liquids liquids – staff kitchen areas in shops, offices and other 60335-2-13 © IEC:2009(E) – –working environments; If IEC – farm houses; If symbol symbol IEC 60417-5041 60417-5041 is is marked marked on on the the appliance, appliance, the the instructions instructions shall shall state state that that surfaces surfaces are are liable to get hot during use 7.12 Addition: liable get hotinduring use and other residential type environments; – by to clients hotels, motels 7.14 Add: – bed and breakfast type environments 7.14 Add: The instructions for appliances incorporating an appliance inlet, and intended to be partially or completely immersed in water for cleaning, shall the than connector must be removed NOTE 102 If the manufacturer wants to limit thebe use the appliance to less the above, this must be clearly The height height of of symbol symbol IEC IEC 60417-5041 60417-5041 shall atof least 8state mm that The shall be mm before theinstructions appliance is cleaned and thatat least the appliance inlet must be dried before the stated in the appliance again “CAUTION Hot surface” shall be at least mm (measured on the capital The height height is of used the warning warning The of the “CAUTION Hot surface” shall be at least mm (measured on the capital letters) Protection against access to live parts letters) The instructions for portable deep fat fryers and other appliances not intended to be immersed in for cleaning state that the appliance must not be immersed 11 Heating 11water Heating This clause of Part shall is applicable 11.8 101 Modification: NOTE Portable frying pans are considered to be appliances that are intended to be immersed in water for 11.8 Modification: cleaning Starting of motor-operated appliances Replace Replace the the first first paragraph paragraph of of Part Part 1 by by the the following: following: “During “During the the test, test, the the temperature temperature rises rises are are The instructions for appliances intended to be used with a connector incorporating a monitored continuously and shall not exceed the values shown in Table and Table monitored continuously and shall not exceed the values shown in Table and Table Z101 Z101 in in This clausewith of Part is that not applicable thermostat shall state only the appropriate connector must be used accordance 11.Z101” accordance with 11.Z101” In row “External enclosure of motor-operated except handles In Table Table delete delete the the row “External enclosure of to motor-operated appliances, except handles held in in The instructions shall include details on how clean surfacesappliances, in contact with food or oil.held 10 Power input and current normal use” and the corresponding footnotes normal use” and the corresponding footnotes The instructions shall state that the appliance is not intended to be operated by means of an Add following Table This clause of Part isZ101 applicable Add the the following Table Z101 external timer or a separate remote-control system 11 The Heating instructions shall include the substance of the following: This clause of Part is applicable except as follows.and similar applications such as: appliance is intended to be used in household – staffModification: kitchen areas in shops, offices and other working environments; 11.2 – farm houses; Portable appliances are placed away from the walls of the test corner – by clients in hotels, motels and other residential type environments; – bed and breakfast type environments NOTE 102 If the manufacturer wants to limit the use of the appliance to less than the above, this must be clearly stated in the instructions Protection against access to live parts children aged less than years Cleaning and user maintenance shall not be made by children The instructions shall include thepositioned substance the following: – Cooking appliances should be in of a stable situation with the handles (if any) positioned BS EN 60335-2-13:2010+A11:2012 to avoid spillage of the hot liquids BS EN 60335-2-13:2010 This appliance is intended to be used in household such as: – – and similar applications EN 60335-2-13:2010+A11:2012 If symbol IEC 60417-5041 is marked on the appliance, the instructions shall state that surfaces are – 10 – 60335-2-13 © IEC:2009(E) – staff kitchen areasuse in shops, offices and other working environments; liable to get hot during – farmAddition: houses; 11.3 7.14 Add: – by clients in hotels, motels and other residential type environments; height of symbol IECof60417-5041 shall be The temperature rise the oil in deep fatatfryers determined by means of thermocouples ENbed 60335-2-13:2010/A11:2012 –least – 8ismm – and breakfast type environments attached to disks of copper or brass, 15 mm in diameter and mm thick The height of the warning “CAUTION Hot surface” shall be at least mm (measured on the capital NOTE 102 If the manufacturer wants to limit the use of the appliance to less than the above, this must be clearly letters) stated the instructions 11.7 inReplacement: – symbol IEC 60417-5041 11 Protection Heating Appliances are operated steady againstuntil access toconditions live partsare established The warning shall be put on the surface of the appliance having the highest temperature and shall be 11.8 visible Modification: during normal operation 11.8 Addition: This clause of Part is applicable Replace 7.6 Add:the first paragraph of Part by the following: “During the test, the temperature rises are The temperature of theand oil shall in deep fat fryers similar appliances least monitored continuously not exceed theand values shown in Table is3 measured and Table at Z101 in Starting of11.Z101” motor-operated 10 mm fromwith the wall of the containerappliances and 10 mm above the bottom However, the temperature accordance is measured 10 mm above the highest point of heating elements if they are located in the [symbol IECshall 60417-5041] Caution, hot surface container The temperature not exceed 225 °C, except that a temperature of 243held °C is In Table delete the1row “External enclosure of motor-operated appliances, except handles in This clause of Part is not applicable allowed for the cycle of operation of the thermostat normal use” and first the corresponding footnotes 7.12 Replace the paragraph of Part beginning with “This appliance can be used by children…” by Add the following Table Z101 10 Power input and The temperature rise ofcurrent parts of deep fat fryers likely to be contacted by spilt oil shall not the following: exceed 275 K – This appliance be used by children from year to years This appliance can be used by This clause of Partshall isnot applicable children aged from years above if theya are continuously supervised This rise appliance canthe be When an appliance connectorand incorporates thermostat, the temperature limit for used by people with reduced physical, sensory or mental capabilities or lack of experience and pins of the inlet does not apply 11 knowledge Heating if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved Keep the appliance and its cord out of reach of less years Cleaning and user maintenance shall not be made by children 12 Void Thischildren clause aged of Part than is applicable except as follows – Cooking appliances should be positioned in a stable situation with the handles (if any) positioned 11.2to Modification: avoid spillage of theand hot liquids 13 Leakage current electric strength at operating temperature BS EN 60335-2-13:2010 –the 10walls – the 60335-2-13 © IEC:2009(E) Portable appliances are is placed away fromappliance, of the test corner If symbol IEC 60417-5041 marked on the instructions shall state that surfaces are This clause of Part is applicable liable to get hot during use 11.3 Addition: 7.14 Add: 14 Transient overvoltages The temperature rise of the oil in deep fat fryers is determined by means of thermocouples The heighttoofdisks symbol 60417-5041 be atinleast mm.and mm thick attached of IEC copper or brass,shall 15 mm diameter This clause of Part is applicable The height of the warning “CAUTION Hot surface” shall be at least mm (measured on the capital 11.7 letters).Replacement: 15 Moisture resistance Appliances are operated until steady conditions are established 11 Heating This clause of Part is applicable except as follows 11.8 Modification: Addition: Appliances intended to be partially or completely immersed water for cleaning 15.101 Replace the first paragraph by following: “During appliances the test, thein are The temperature of the oilofinPart deep fatthe fryers and similar istemperature measured rises at least shall have adequate protection against the effects of immersion monitored continuously shall not and exceed the above values the shown in Table andthe Table Z101 in 10 mm from the wall of and the container 10 mm bottom However, temperature accordance with is measured 1011.Z101” mm above the highest point of heating elements if they are located in the Compliance is checked by shall the following tests, are carried out on three container The temperature not exceed 225 which °C, except that a temperature of additional 243 °C is In Table delete the row “External enclosure of motor-operated appliances, except handles held in appliances allowed for the first cycle of operation of the thermostat normal use” and the corresponding footnotes appliances are operated under normal operation times rated input, The temperature rise of parts of deep fat fryers likelyatto1,15 be contacted bypower spilt oil shalluntil not Add the following Table Z101 the thermostat exceed 275 K operates for the first time Appliances without a thermostat are operated until steady conditions are established The appliances are disconnected from the supply, any appliance connector being withdrawn They are then completely immersed in water containing When an appliance connector incorporates a thermostat, the temperature rise limit for the approximately % NaCl and having a temperature between 10 °C and 25 °C, unless they are pins of the inlet does not apply marked with the maximum level of immersion, in which case they are immersed 50 mm deeper than this level 12 Void After h, the appliances are removed from the saline solution, dried and subjected to the leakage current test of 16.2 13 Leakage current and electric strength at operating temperature This clause of Part is applicable 14 Transient overvoltages BS EN 60335-2-13:2010+A11:2012 EN 60335-2-13:2010+A11:2012 – 5–– – 10 EN 60335-2-13:2010/A11:2012 Table Z101 – Maximum temperature rises of external enclosures under normal operating conditions Surface a Temperature rise K Bare metal Coated metal d, e 45 b 55 Glass and ceramic Plastic and plastic coating > 0,3 mm 60 c 65 a When the thickness of the plastic coating does not exceed 0,3 mm, the temperature rise limits of the coated metal or of glass and ceramic material apply b Metal is considered coated when a coating having a minimum thickness of 80 µm made by enamel or non substantially plastic coating is used c The temperature rise limit of plastic also applies for plastic material having a metal finish of thickness less than 0,1 mm d e In addition to surfaces described under 11.Z101 the following surfaces or elements shall not be taken into consideration: • hot functional surface: surface which is intentionally heated by an internal heat source and which has to be hot to carry out the function for which the equipment is intended to be used; • vessels that contain oil or fat and that become hot through conduction; • handles or control knobs including keypads, keyboards and the like; • surfaces of heated cavities or surfaces adjacent to the functional areas inside the compartment When, due to the construction or dimensional limitations of the appliance, the required values cannot be met, the maximum temperature rise shall not be higher than twice the values indicated In such cases, a warning shall be marked on the appliance Add the following new subclause: BS operation EN 60335-2-13:2010 11.Z101 The appliance is supplied at rated power and operated under normal – 10 – 60335-2-13 © IEC:2009(E) Temperature rises are not measured on •11.3theAddition: lids, The temperature of from the oil in deep fat fryers is determined by means of thermocouples • surfaces within rise 25 mm attached to disks of copper or brass, 15 mm in diameter and mm thick – the edge of the lid, the ventilation openings, 11.7– Replacement: – the edge of the hot functional surface The vessel is considered hot functional surface, Appliances are operated until steady conditions are established • underside surfaces that are not accessible with probe 41 of EN 61032 The probe is applied appreciable force 11.8without Addition: The temperature of the oil in deep fat fryers and similar appliances is measured at least 10 mm from the wall of the container and 10 mm above the bottom However, the temperature is measured 10 mm above the highest point of heating elements if they are located in the container The temperature shall not exceed 225 °C, except that a temperature of 243 °C is allowed for the first cycle of operation of the thermostat The temperature rise of parts of deep fat fryers likely to be contacted by spilt oil shall not exceed 275 K When an appliance connector incorporates a thermostat, the temperature rise limit for the pins of the inlet does not apply 12 Void 13 Leakage current and electric strength at operating temperature This clause of Part is applicable The temperature rise of parts of deep fat fryers likely to be contacted by spilt oil shall not exceed 275 K BS EN 60335-2-13:2010+A11:2012 11 – EN 60335-2-13:2010+A11:2012 When an appliance connector incorporates a– thermostat, the temperature rise limit for the pins of the inlet does not apply 12 Void 13 Leakage current and electric strength at operating temperature This clause of Part is applicable 14 Transient overvoltages This clause of Part is applicable 15 Moisture resistance This clause of Part is applicable except as follows 15.101 Appliances intended to be partially or completely immersed in water for cleaning shall have adequate protection against the effects of immersion Compliance is checked by the following tests, which are carried out on three additional appliances The appliances are operated under normal operation at 1,15 times rated power input, until the thermostat operates for the first time Appliances without a thermostat are operated until steady conditions are established The appliances are disconnected from the supply, any appliance connector being withdrawn They are then completely immersed in water containing approximately % NaCl and having a temperature between 10 °C and 25 °C, unless they are marked with the maximum level of immersion, in which case they are immersed 50 mm deeper than this level BS EN 60335-2-13:2010 After h, the appliances are removed from the saline solution, dried and subjected to the 60335-2-13 © IEC:2009(E) – 11 – leakage current test of 16.2 NOTE inlets Care is to be taken to ensure that all moisture is removed from the insulation around the pins of appliance This test is carried out four more times, after which the appliances shall withstand the electric strength test of 16.3, the voltage being as specified in Table The appliance having the highest leakage current after the fifth immersion is dismantled and inspection shall show that there is no trace of liquid on insulation that could result in a reduction of clearances and creepage distances below the values specified in Clause 29 The remaining two appliances are operated under normal operation at 1,15 times rated power input for 240 h After this period, the appliances are disconnected from the supply and immersed again for h They are then dried and subjected to the electric strength test of 16.3, the voltage being as specified in Table Inspection shall show that there is no trace of liquid on insulation that could result in a reduction of clearances and creepage distances below the values specified in Clause 29 16 Leakage current and electric strength This clause of Part is applicable 17 Overload protection of transformers and associated circuits This clause of Part is applicable reduction of clearances and creepage distances below the values specified in Clause 29 Leakage current and electric strength BS EN16 60335-2-13:2010+A11:2012 – 12 – EN 60335-2-13:2010+A11:2012 This clause of Part is applicable 17 Overload protection of transformers and associated circuits This clause of Part is applicable 18 Endurance This clause of Part is not applicable 19 Abnormal operation This clause of Part is applicable except as follows 19.1 Addition: Deep fat fryers incorporating a thermal cut-out of the capillary type are also subjected to the test of 19.101 Deep fat fryers with detachable heating elements are also subjected to the test of 19.102 Frying pans are not subjected to the tests of 19.4 and 19.5 19.2 Addition: Deep fat fryers are filled with oil to a height of 10 mm above the highest point of the bottom of the container If the heating element is located in the container, the appliance is filled to a height of 10 mm above the highest point of the heating element If the container has an inclined bottom and a rotating basket, the quantity of oil is 60 % of that required to fill the appliance to the minimum marked level BS EN 60335-2-13:2010 – 12 – Frying pans are operated without oil in the container 19.3 60335-2-13 © IEC:2009(E) Modification: Frying pans are tested at 1,15 times rated power input, the thermostat being adjusted to its highest setting 19.13 Addition: The temperature of the oil in deep fat fryers and the temperature at the centre of the heated surface of frying pans shall not exceed 295 °C During the tests of 19.2 and 19.3, the temperature of the oil in deep fat fryers, measured mm below the oil level and at a distance of not less than mm from any surface inside the container, shall not exceed 265 °C However, a temperature of 280 °C is allowed for the first cycle of operation of the thermostat A temperature rise of 200 K is allowed for the floor and the walls of the test corner during the first minute of the test of 19.102 19.101 Deep fat fryers incorporating a thermal cut-out of the capillary type are tested as specified in 19.4 but with the capillary tube ruptured 19.102 Detachable heating elements, which are not automatically disconnected from the supply when they are removed from the deep fat fryer, are placed on the floor of the test corner in the most unfavourable position and operated at rated power input 20 Stability and mechanical hazards This clause of Part is applicable 19.101 Deep fat fryers incorporating a thermal cut-out of the capillary type are tested as specified in 19.4 but with the capillary tube ruptured BS EN disconnected 60335-2-13:2010+A11:2012 19.102 Detachable heating elements, which are not automatically from the supply when they are removed from the deep fat– fryer, are placed the floor of the test – 13 ENon 60335-2-13:2010+A11:2012 corner in the most unfavourable position and operated at rated power input 20 Stability and mechanical hazards This clause of Part is applicable 21 Mechanical strength This clause of Part is applicable 22 Construction This clause of Part is applicable except as follows 22.35 Addition: NOTE 101 Handles and similar parts of accessories that not incorporate electrical components are not considered likely to become live in the event of an insulation fault 23 Internal wiring This clause of Part is applicable 24 Components This clause of Part is applicable except as follows 24.1.5 Addition: For appliance couplers incorporating thermostats, thermal cut-outs or fuses in the connector, IEC 60320-1 is applicable except that BS EN 60335-2-13:2010 © IEC:2009(E) – –60335-2-13 the earthing contact of the connector –is13allowed to be accessible, provided that this contact is not likely to be gripped during insertion or withdrawal of the connector; – the temperature required for the test of Clause 18 is that measured on the pins of the appliance inlet during the heating test of Clause 11 of this standard; – the breaking-capacity test of Clause 19 is carried out using the inlet of the appliance; – the temperature rise of current-carrying parts specified in Clause 21 is not determined NOTE 101 Thermal controls are not allowed in connectors complying with the standard sheets of IEC 60320-1 24.101 Thermal cut-outs incorporated in appliances for compliance with 19.4 shall not be self-resetting Compliance is checked by inspection 25 Supply connection and external flexible cords This clause of Part is applicable except as follows 25.1 Addition: Appliances incorporating an appliance inlet that does not comply with the standard sheets of IEC 60320-1 shall be supplied with a cord set 25.7 Addition: Rubber sheathed cords shall be not lighter than ordinary polychloroprene sheathed cord (code designation 60245 IEC 57) This clause of Part is applicable except as follows Addition: BS EN25.1 60335-2-13:2010+A11:2012 14 – does not comply with the standard sheets of EN 60335-2-13:2010+A11:2012 Appliances incorporating an appliance inlet– that IEC 60320-1 shall be supplied with a cord set 25.7 Addition: Rubber sheathed cords shall be not lighter than ordinary polychloroprene sheathed cord (code designation 60245 IEC 57) 25.14 Not applicable 26 Terminals for external conductors This clause of Part is applicable 27 Provision for earthing This clause of Part is applicable 28 Screws and connections This clause of Part is applicable 29 Clearances, creepage distances and solid insulation This clause of Part is applicable except as follows 29.2 Addition: The microenvironment is pollution degree unless the insulation is enclosed or located so that it is unlikely to be exposed to pollution during normal use of the appliance 30 Resistance to heat and fire This clause of Part is applicable except as–follows 14 – 30.2 BS EN 60335-2-13:2010 60335-2-13 © IEC:2009(E) Addition: For frying pans, 30.2.2 is applicable For deep fat fryers, 30.2.3 is applicable 31 Resistance to rusting This clause of Part is applicable 32 Radiation, toxicity and similar hazards This clause of Part is applicable BS EN 60335-2-13:2010 60335-2-13 © IEC:2009(E) – 15 – – 15 – Annexes The annexes of Part are applicable BS EN 60335-2-13:2010+A11:2012 EN 60335-2-13:2010+A11:2012 BS EN 60335-2-13:2010+A11:2012 EN 60335-2-13:2010+A11:2012 – 16 – – 16 – BS EN 60335-2-13:2010 60335-2-13 © IEC:2009(E) Bibliography The bibliography of Part is applicable except as follows Addition: IEC 60335-2-37, Household and similar electrical appliances – Safety – Part 2-37: Particular requirements for commercial electric deep fat fryers IEC 60335-2-39, Household and similar electrical appliances – Safety – Part 2-39: Particular requirements for commercial electric multi-purpose cooking pans ISO 13732-1, Ergonomics of the thermal environment – Methods for the assessment of human responses to contact with surfaces – Part 1: Hot surfaces _ This page deliberately left blank NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW British Standards Institution (BSI) BSI is the national body responsible for preparing British Standards and other standards-related publications, information and services BSI is incorporated by Royal Charter British Standards and other standardization products are published by BSI Standards Limited About us Revisions We bring together business, industry, government, consumers, innovators and others to shape their combined experience and expertise into standards -based solutions Our British Standards and other publications are updated by amendment or revision The knowledge embodied in our standards has been carefully assembled in a dependable format and refined through our open consultation process Organizations of all sizes and across all sectors choose standards to help them achieve their goals Information on standards We can provide you with the knowledge that your organization needs to succeed Find out more about British Standards by visiting our website at bsigroup.com/standards or contacting our Customer Services team or Knowledge Centre Buying standards You can buy and download PDF versions of BSI publications, including British and adopted European and international standards, through our website at bsigroup.com/shop, where hard copies can also be purchased If you need international and foreign standards from other Standards Development Organizations, hard copies can be ordered from our Customer Services team Subscriptions Our range of subscription services are designed to make using standards easier for you For further information on our subscription products go to bsigroup.com/subscriptions With British Standards Online (BSOL) you’ll have instant access to over 55,000 British and adopted European and international standards from your desktop It’s available 24/7 and is refreshed daily so you’ll always be up to date You can keep in touch with standards developments and receive substantial discounts on the purchase price of standards, both in single copy and subscription format, by becoming a BSI Subscribing Member PLUS is an updating service exclusive to BSI Subscribing Members You will automatically receive the latest hard copy of your standards when they’re revised or replaced To find out more about becoming a BSI Subscribing Member and the benefits of membership, please visit bsigroup.com/shop With a Multi-User Network Licence (MUNL) you are able to host standards publications on your intranet Licences can cover as few or as many users as you wish With updates supplied as soon as they’re available, you can be sure your documentation is current For further information, email bsmusales@bsigroup.com BSI Group Headquarters 389 Chiswick High Road London W4 4AL UK We continually improve the quality of our products and services to benefit your business If you find an inaccuracy or ambiguity within a British Standard or other BSI publication please inform the Knowledge Centre Copyright All the data, software and documentation set out in all British Standards and other BSI publications are the property of and copyrighted by BSI, or some person or entity that owns copyright in the information used (such as the international standardization bodies) and has formally licensed such information to BSI for commercial publication and use Except as permitted under the Copyright, Designs and Patents Act 1988 no extract may be reproduced, stored in a retrieval system or transmitted in any form or by any means – electronic, photocopying, recording or otherwise – without prior written permission from BSI Details and advice can be obtained from the Copyright & Licensing Department Useful Contacts: Customer Services Tel: +44 845 086 9001 Email (orders): orders@bsigroup.com Email (enquiries): cservices@bsigroup.com Subscriptions Tel: +44 845 086 9001 Email: subscriptions@bsigroup.com Knowledge Centre Tel: +44 20 8996 7004 Email: knowledgecentre@bsigroup.com Copyright & Licensing Tel: +44 20 8996 7070 Email: copyright@bsigroup.com