BS EN 60335-2-8:2015+A1:2016 BSI Standards Publication Household and similar electrical appliances — Safety Part 2-8: Particular requirements for shavers, hair clippers and similar appliances BS EN 60335-2-8:2015+A1:2016 BRITISH STANDARD National foreword This British Standard is the UK implementation of EN 60335-2-8:2015+A1:2016 It is derived from IEC 60335-2-8:2012, incorporating amendment 1:2015 It supersedes BS EN 60335-2-8:2015, which will be withdrawn on 28 December 2018 The start and finish of text introduced or altered by amendment is indicated in the text by tags Tags indicating changes to IEC text carry the number of the IEC amendment For example, text altered by IEC amendment is indicated by !" The CENELEC common modifications have been implemented at the appropriate places in the text The start and finish of each common modification is indicated in the text by tags The UK participation in its preparation was entrusted by Technical Committee CPL/61, Safety of household and similar electrical appliances, to Subcommittee CPL/61/1, Motorised appliance group A list of organizations represented on this subcommittee can be obtained on request to its secretary This publication does not purport to include all the necessary provisions of a contract Users are responsible for its correct application © The British Standards Institution 2016 Published by BSI Standards Limited 2016 ISBN 978 580 89637 ICS 13.120; 97.170 Compliance with a British Standard cannot confer immunity from legal obligations This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 January 2016 Amendments/corrigenda issued since publication Date Text affected 30 April 2016 Implementation of IEC amendment 1:2015 with CEN endorsement A1:2016 EUROPEAN STANDARD EN 60335-2-8:2015+A1 NORME EUROPÉENNE EUROPÄISCHE NORM February 2016 ICS 13.120; 97.170 Supersedes EN 60335-2-8:2003 English Version Household and similar electrical appliances - Safety Part 2-8: Particular requirements for shavers, hair clippers and similar appliances (IEC 60335-2-8:2012 , modified) Appareils électrodomestiques et analogues - Sécurité Partie 2-8: Exigences particulières pour les rasoirs, les tondeuses et appareils analogues (IEC 60335-2-8:2012 , modifiée) Sicherheit elektrischer Geräte für den Hausgebrauch und ähnliche Zwecke - Teil 2-8: Besondere Anforderungen für Rasiergeräte, Haarschneidemaschinen und ähnliche Geräte (IEC 60335-2-8:2012 , modifiziert) This European Standard was approved by CENELEC on 2015-07-20 CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member This European Standard exists in three official versions (English, French, German) A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom European Committee for Electrotechnical Standardization Comité Européen de Normalisation Electrotechnique Europäisches Komitee für Elektrotechnische Normung CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels © 2015 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members Ref No EN 60335-2-8:2015 E BS EN 60335-2-8:2015+A1:2016 EN 60335-2-8:2015+A1:2016 –2– European foreword This document (EN 60335-2-8:2015) consists of the text of IEC 60335-2-8:2012 prepared by IEC/TC 61 "Safety of household and similar electrical appliances", together with the common modifications prepared by CLC/TC 61 "Safety of household and similar electrical appliances" The following dates are fixed: • latest date by which the document has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2016-05-20 • latest date by which the national standards conflicting with the document have to be withdrawn (dow) 2018-07-20 This document supersedes EN 60335-2-8:2003 This Part 2-8 is to be used in conjunction with EN 60335-1:2012 and its amendments Clauses, subclauses, notes, tables, figures and annexes which are additional to those in IEC 60335-2-8:2012 or in IEC 60335-1:2010 are prefixed “Z” Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights CENELEC [and/or CEN] shall not be held responsible for identifying any or all such patent rights This document has been prepared under a mandate given to CENELEC by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive(s) For the relationship with EU Directive(s), see informative Annex ZZ, which is an integral part of this document This standard covers the Principle Elements of the Safety Objectives for Electrical Equipment Designed for Use within Certain Voltage Limits (LVD - 2006/95/EC) Endorsement notice The text of the International Standard IEC 60335-2-8:2012 was approved by CENELEC as a European Standard with agreed common modifications –3– BS EN 60335-2-8:2015+A1:2016 EN 60335-2-8:2015+A1:2016 Foreword to amendment A1 The text of document 61/5000/FDIS, future IEC 60335-2-8:2012/A1, prepared by IEC/TC 61 "Safety of household and similar electrical appliances" was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 60335-2-8:2015/A1:2016 The following dates are fixed: • latest date by which the document has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2016-09-28 • latest date by which the national standards conflicting with the document have to be withdrawn (dow) 2018-12-28 Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights CENELEC [and/or CEN] shall not be held responsible for identifying any or all such patent rights This standard covers the Principle Elements of the Safety Objectives for Electrical Equipment Designed for Use within Certain Voltage Limits (LVD - 2006/95/EC) This document has been prepared under a mandate given to CENELEC by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive(s) For the relationship with EU Directive 2006/42/EC, see informative Annex ZZ, included in EN 60335-2-8:2015 Endorsement notice The text of the International Standard IEC 60335-2-8:2012/A1:2015 was approved by CENELEC as a European Standard without any modification BS EN 60335-2-8:2015+A1:2016 EN 60335-2-8:2015+A1:2016 –4– Annex ZE (normative) Specific additional requirements for appliances and machines intended for commercial use Annex ZE of Part is applicable with the following modifications: Scope Replacement: This Annex ZE deals with additional requirements concerning appliances and machines intended to be used by expert or trained users in shops, in hairdressers, in light industry, on farms and appliances and machines which are declared to be for commercial use by lay persons NOTE ZE1 The statement from the manufacturer in the product information concerning the specific product is the criterion that has to be considered to determine the intended use of the appliance The statement needs to reflect accurately the reasonably foreseeable use of the product After the last paragraph, add the following: All products covered by this European Standard, except animal shearers, not create a relevant noise hazard, therefore no specific provisions concerning noise emitted by such products are given NOTE ZE2 The comparable short-term noise exposure for the animal is considered to cause no relevant hazard Normative references Replace the text by the following: This clause of Part is applicable except as follows Add the following standards: EN ISO 5349-1, Mechanical vibration – Measurement and evaluation of human exposure to handtransmitted vibration – Part 1: General requirements (ISO 5349-1) EN ISO 5349-2, Mechanical vibration – Measurement and evaluation of human exposure to handtransmitted vibration – Part 2: Practical guidance for measurement at the workplace (ISO 5349-2) Terms and definitions This clause of Annex ZE of Part is applicable General requirement This clause of Annex ZE of Part is applicable Marking and instructions This clause of Annex ZE of Part is applicable except as follows: 7.12 Addition: The instructions shall indicate the substance of the following: “This appliance is designed to be used in commercial areas” –5– BS EN 60335-2-8:2015+A1:2016 EN 60335-2-8:2015+A1:2016 7.12.ZE1 Replace the sixth bullet item by the following: • On airborne noise emissions, determined and declared in accordance with Annex ZAA: - For all products except animal shearers, it shall be stated that the A-weighted sound pressure level is below 70 dB; For animal shearers, the A-weighted emission sound pressure level where this exceeds 70 dB(A) shall be stated If the A-weighted sound pressure level is below 70 dB, no value need be given, but the instructions shall state that the A-weighted sound pressure level is below 70 dB,” Add a new seventh bullet item as follows: • ”The instructions shall give the following information concerning vibrations transmitted by the appliance to the hand-arm system: - the vibration total value to which the hand-arm system is subjected, measured according to EN ISO 5349-1 and EN ISO 5349-2, if it exceeds or equals 2,5 m/s², the uncertainty of measurement shall also be stated If the value does not exceed 2,5 m/s², the instructions shall state that the vibration level is below 2,5 m/s²; These values shall be either those actually measured for the machinery in question or those established on the basis of measurements taken for technically comparable machinery which is representative of the machinery to be produced." 19 Abnormal operation This clause of Annex ZE of Part is not applicable 20 Stability and mechanical hazards This clause of Annex ZE of Part is applicable 21 Mechanical strength This clause of Annex ZE of Part is applicable 22 Construction This clause of Annex ZE of Part is applicable except as follows: 22.ZE.6 This sub-clause is not applicable BS EN 60335-2-8:2015+A1:2016 EN 60335-2-8:2015+A1:2016 –6– Annex ZAA (normative) Emission of acoustical noise ZAA.1 Noise reduction Noise reduction at animal shearers is an integral part of the design process and shall be achieved by particularly applying measures at source to control noise, see for example EN ISO 11688-1 The success of the applied noise reduction measures is assessed on the basis of the actual noise emission values in relation to other appliances of the same type with comparable non-acoustical technical data ZAA.2 Noise test code ZAA.2.1 Emission sound pressure level determination The A-weighted emission sound pressure level is determined in accordance with EN ISO 11203 for appliances with Q = dB(A) ZAA.2.2 Sound power level determination For the determination of the A-weighted sound power level, EN ISO 3744 shall be used, subject to the following modifications or additions: a) the microphones shall be arranged in accordance with Figure ZAA.101; b) the measurement surface shall be a parallelepiped with a measurement distance of d = m from the reference box as defined in EN ISO 3744 BS EN 60335-2-8:2015+A1:2016 EN 60335-2-8:2015+A1:2016 –7– Key A measuring path B C measuring path measuring path D E l1, l2,l3, d reference box reflecting surface dimension of the parallelepiped measurement distance 1…9 microphone positions lateral position of microphone (for operator's position) Figure ZAA.101 — Measurement area and positions of the microphones for appliances ZAA.2.3 Mounting and installation conditions The animal shearer under test shall be new It shall be equipped with the shearing blade, as recommended by the manufacturer, which affects the acoustic properties causing the highest noise level ° The animal shearer shall be positioned so that its axis is at 45 between the microphone positions – and – 3; its geometrical centre shall be m above the ground (reflecting plane) For measurement the animal shearer shall be fixed horizontally in a stable condition using the arrangement of Figure ZAA.102 BS EN 60335-2-8:2015+A1:2016 EN 60335-2-8:2015+A1:2016 –8– Figure ZAA.102 — Fixing system for animal shearers ZAA.2.4 Operating conditions The appliance shall be operated in normal use at maximum speed and according to the instructions The operating condition shall be identical for the determination for both sound power and emission sound pressure level at the specified positions ZAA.2.5 Measurement uncertainties The total measurement uncertainty of the noise emission values determined according to this European Standard is depending on the standard deviation σR0 given by the applied noise emission measurement method and the uncertainty associated with the instability of the operating and mounting conditions σomc The resulting total uncertainty is then calculated from σ tot = σR2 + σomc The upper bound value of σR0 is about 1,5 dB for the grade measurement methods dealing with the determination of the emission sound pressure level or the sound power level NOTE For machines with a rather constant noise emission, a value of 0,5 dB for σomc can apply In other cases, e.g a large influence of the material flow into and out of the machine or material flow that varies in an unpredictable manner, it is possible that a value of dB may be more appropriate Methods to determine σomc are described in the basic measurement standards The expanded measurement uncertainty U, in decibels, shall be calculated from U = k σtot where k is the coverage factor NOTE The expanded measurement uncertainty depends on the degree of confidence that is desired For the purpose of comparing the result with a limit value, it is appropriate to apply the coverage factor for a one-sided normal distribution In that case, the coverage factor k = 1,6 corresponds to a 95 % confidence level Further information is given in EN ISO 4871 Please note that the expanded measurement uncertainty U is denoted as K in EN ISO 4871 NOTE The expanded measurement uncertainty as described in this European Standard does not include the standard deviation of production which is used in EN ISO 4871 for the purpose of making a noise declaration for batches of machines ZAA.2.6 Information to be recorded The information to be recorded covers all of the technical requirements of this noise test code Any deviations from this noise test code or from the basic standards upon which it is based are to be recorded together with the technical justification for such deviations 10 BS EN 60335-2-8:2015+A1:2016 EN 60335-2-8:2015+A1:2016 BS EN 60335-2-8:2015 60335-2-8 © IEC:2012 – 14 – –5– – 6.1: – 11.7: Appliances for household use are operated for 20 Other appliances are operated for with rest periods of (USA) Class appliances are allowed provided that their rated voltage does not exceed 150 V (Japan) – 24.1.3: – 25.7: – 25.14: The test is carried out for 000 operations (USA) Supply cords specially intended for use with electric shavers and hair clippers are allowed (USA) The tests are not carried out (USA) – 15 – –6– BS EN 60335-2-8:2015+A1:2016 EN 60335-2-8:2015+A1:2016 BS EN 60335-2-8:2015 60335-2-8 © IEC:2012 INTRODUCTION It has been assumed in the drafting of this International Standard that the execution of its provisions is entrusted to appropriately qualified and experienced persons This standard recognizes the internationally accepted level of protection against hazards such as electrical, mechanical, thermal, fire and radiation of appliances when operated as in normal use taking into account the manufacturer's instructions It also covers abnormal situations that can be expected in practice and takes into account the way in which electromagnetic phenomena can affect the safe operation of appliances This standard takes into account the requirements of IEC 60364 as far as possible so that there is compatibility with the wiring rules when the appliance is connected to the supply mains However, national wiring rules may differ If an appliance within the scope of this standard also incorporates functions that are covered by another part of IEC 60335, the relevant part is applied to each function separately, as far as is reasonable If applicable, the influence of one function on the other is taken into account When a part standard does not include additional requirements to cover hazards dealt with in Part 1, Part applies NOTE This means that the technical committees responsible for the part standards have determined that it is not necessary to specify particular requirements for the appliance in question over and above the general requirements This standard is a product family standard dealing with the safety of appliances and takes precedence over horizontal and generic standards covering the same subject NOTE Horizontal and generic standards covering a hazard are not applicable since they have been taken into consideration when developing the general and particular requirements for the IEC 60335 series of standards For example, in the case of temperature requirements for surfaces on many appliances, generic standards, such as ISO 13732-1 for hot surfaces, are not applicable in addition to Part or part standards An appliance that complies with the text of this standard will not necessarily be considered to comply with the safety principles of the standard if, when examined and tested, it is found to have other features that impair the level of safety covered by these requirements An appliance employing materials or having forms of construction differing from those detailed in the requirements of this standard may be examined and tested according to the intent of the requirements and, if found to be substantially equivalent, may be considered to comply with the standard The principle objectives of Low Voltage Directive 2006/95/EC, are covered in this European Standard The Essential Health and Safety Requirements of the Machinery Directive 2006/42/EC, which can be applicable to some appliances, covered by this part have also been taken into account BS EN 60335-2-8:2015+A1:2016 EN 60335-2-8:2015+A1:2016 BS EN 60335-2-8:2015 60335-2-8 © IEC:2012 – 16 – –7– EN 60335-2-8:2015 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES – SAFETY – Introduction Add: Part 2-8: Particular requirements for shavers, hair clippers and similar appliances Scope This clause of Part is replaced by the following ! Battery-operated appliances and other d.c supplied appliances are within the scope of this standard Dual supply appliances, either mains-supplied or battery-operated, are regarded as battery-operated appliances when operated in the battery mode." This European Standard deals with the safety of electric shavers, hair clippers and similar appliances intended for the household environment and commercial purposes, their rated voltage being not more than 250 V NOTE Z101 Battery-operated appliances and other d.c supplied appliances are within the scope of this NOTE 101 standard NOTE Z102 Examples of similar appliances are animal clippers and those used for manicure and pedicure NOTE Z103 Examples of appliance for household environment are appliances for typical housekeeping functions used in the household environment that may also be used by non-expert users for typical housekeeping functions: • in shops, offices and other similar working environments; • in farm houses; • by clients in hotels, motels and other residential type environments; • in bed and breakfast type environments Appliances and machines intended to be used by expert or trained users in shops, in light industry and on farms, and appliances and machines which are declared to be for commercial use by lay persons – are within the scope of this standard Additional requirements for such appliances are given in Annex ZE – NOTE Z104 Examples of such appliances and machines are manicure and pedicure appliances, animal clippers and animal shearers, for commercial use, and appliances for hairdressers – This standard deals with the reasonably foreseeable hazards presented by appliances and machines that are encountered by all persons However, in general, it does not take into account: • – children withpurposes the appliance; appliancesplaying for medical (IEC • the use of the appliances by very young children; • the use of shaver and wet shaver by young children; • the use of the animal clipper, hair clipper, and appliances for manicure and pedicure by young children without supervision; • the use of animal shearer by children; It is recognized that very vulnerable people may have needs beyond the level addressed in this standard. This International Standard deals with the safety of electric shavers, hair clippers and similar appliances for household and similar purposes, rated voltage not more As far as intended is practicable, this standard deals with thetheir common hazards being presented by than 250 V.that are encountered by all persons in and around the BShome EN 60335-2-8:2015+A1:2016 appliances However, in general, – 17 – EN 60335-2-8:2015+A1:2016 it does not take into account EN EN 60335-2-8:2015 60335-2-8:2015 NOTE 101 Examples of similar appliances are those used for manicure and pedicure – persons (including children) whose Appliances not intended for normal household use, but which nevertheless may be a source • physical, sensory or mental capabilities; or of danger to the public, such as appliances intended to be used by laymen in shops and on NOTE Attention drawn to fact that farms, are theis this • Z105 lackwithin of experience knowledge NOTE Z105 Attention is scope drawnand toofthe the factstandard that prevents them from using the appliance safely without supervision or instruction; –– for appliances intended to be vehicles on ships aircraft, additional requirements may NOTE Examples of such animalor shearers appliances for hairdressers for 102 appliances intended to appliances be used used in inare vehicles orclippers, on board boardanimal ships or or aircraft,and additional requirements may be be – necessary, children playing with the appliance necessary, As far as is practicable, this standard deals with the common hazards presented by appliances that are encountered all persons in andby the home –– in many countries, additional are the health authorities, the national NOTE is drawn to therequirements factby that in 103 many Attention countries, additional requirements are specified specified byaround the national national health However, authorities, in thegeneral, national it does not take into account responsible of national water authorities similar – authorities for appliances intendedfor be protection used in vehicles or the on board ships or supply aircraft, additionaland requirements may be authorities responsible fortothe the protection of labour, labour, the national water supply authorities and similar authorities authorities necessary; – persons (including whose NOTE Z106 This standardchildren) does not apply to – in Z106 many countries additional requirements NOTE This standard does not apply to are specified by national health authorities, national authorities for the protection of labourcapabilities; and similar authorities •responsible physical, sensory or mental or –– appliances appliances intended intended to to be be used used in in locations locations where where special special conditions conditions prevail, prevail, such such as as the the presence presence of of a a – childrenappliances playing with appliance massage (IEC the 60335-2-32); NOTE 104 standard does and not apply to •corrosive lackThis of explosive experience knowledge corrosive or or explosive atmosphere atmosphere (dust, (dust, vapour vapour or or gas), gas), – appliances intended to be usedthe in appliance locations where special conditions prevail, or such as the presence of a prevents them from using safely without supervision instruction; explosive(EN atmosphere (dust, vapour or gas); – corrosive massage or appliances 60335-2-32), – – massage appliances (EN 60335-2-32), appliances for medical purposes (EN 60601) – for purposes (IEC 60601) – appliances appliances for medical medical purposes (ENthat 60601). NOTE 103 Attention is drawn to the fact – 2 – for appliances intended to be used in vehicles or on board ships or aircraft, additional requirements may be Normative references references necessary; Normative Normative references in many countries additional requirements are specified by national health authorities, national authorities the standards: for the protection of labour and similar authorities the following following standards: Add Addresponsible the following standards: NOTE 1043744, This Acoustics standard does not apply to EN ISO – Determination EN ISO 3744, Acoustics – Determination of of sound sound power power levels levels and and sound sound energy energy levels levels of of noise noise sources using sound pressure – methods for an field over a Terms and definitions – appliances intended to be used in locations where special prevail,free such as the of a sources using sound pressure – Engineering Engineering methods for conditions an essentially essentially free field overpresence a reflecting reflecting corrosive or explosive atmosphere (dust, vapour or gas); plane (ISO 3744) plane (ISO 3744) – 60335-2-32); Thismassage clause appliances of Part (IEC is applicable except as follows EN ISO 4871, Acoustics – Declaration and verification verification of of noise noise emission emission values values of of machinery machinery and and equipment (ISO 4871) equipment (ISO 4871) EN ISO 4871,for Acoustics – Declaration and – appliances medical purposes (IEC 60601) Normative references EN 11203, – EN ISO ISO 11203, Acoustics Acoustics – Noise Noise emitted emitted by by machinery machinery and and equipment equipment – – Determination Determination of of emission emission sound sound pressure pressure levels levels at at a a work work station station and and at at other other specified specified positions positions from from the the sound sound power power level level (ISO 11203) This clause of Part is applicable (ISO 11203) 7 Marking Marking and and instructions instructions Terms and definitions BS EN 60335-2-8:2015 7.10 7.10 Replace Replace the the first first sentence sentence of of the the fourth fourth paragraph: paragraph: – – 60335-2-8 © IEC:2012 This clause of Part is applicable except as follows Devices, except for those on animal shearers, used to start/stop operational functions Devices, except for those on animal shearers, used to start/stop operational functions of of the the appliance, if any, shall be distinguished from other manual devices by means of shape, or size, appliance, if any, shall be distinguished from other manual devices by means of shape, or size, or or 3.1.9 Replacement: surface surface texture, texture, or or position, position, etc etc normal operation 7.12 the fourth from Part the operation of the under the 7.12 Replace Replace theappliance fourth paragraph paragraph fromfollowing Part 1 by byconditions: the following: following: Animal clipper, clipper, appliances manicure can be used children aged The appliance is held by aand clamp, with itsfor axis and and pedicure the major axis theby cutting head or Animal clipper, hair hair clipper, and appliances formajor manicure and pedicure can be of used by children aged from years under supervision other accessory positioned in a horizontal plane, and operated without applying a load from years under supervision Appliances having animal adjustable shearing or clipping heads are operatedand the blades Shaver, clipper, hair and for pedicure can Shaver, wet wet shaver, shaver, animal clipper, hair clipper, clipper, and appliances appliances for manicure manicure andwith pedicure can be be adjusted so that the power input is 0,8 times rated power input, or 1,2 times the power input used by children aged from years and above and persons with reduced physical, sensory used by children aged from years and above and persons with reduced physical, sensory or or mental mental obtained removing any detachable parts ififthat thesupervision load, whichever is the capabilities or of and they have been or capabilitiesafter or lack lack of experience experience and knowledge knowledge theycould haveinfluence been given given supervision or instruction instruction more unfavourable No further adjustments are made concerning use of the appliance in a safe way and understand the hazards involved Children shall concerning use of the appliance in a safe way and understand the hazards involved Children shall not not play play with with the the appliance appliance Cleaning Cleaning and and user user maintenance maintenance shall shall not not be be made made by by children children without without supervision NOTE 101 The clamp is selected so that there is negligible effect on the heat transfer from the appliance supervision 3.101 Animal Animal shearers shearers can can only only be be used used by by trained trained personnel personnel animal shearer appliance for commercial use for shearing the fleece of an animal such as a sheep 3.102 animal clipper appliance for commercial use in parlours or for household use for trimming the hair of an animal such as a dog 3.103 4 washable shaver shaver, the hand-held part of which can be cleaned under water appliance for commercial use for shearing the fleece of an animal such as a sheep BS EN 60335-2-8:2015+A1:2016 3.102 – 18 – EN 60335-2-8:2015+A1:2016 animal clipper appliance for commercial use in parlours or for household use for trimming the hair of an animal such as a dog 3.103 washable shaver shaver, the hand-held part of which can be cleaned under water 3.104 wet shaver shaver, the hand-held part of which may be used in a bath or shower General requirement This clause of Part is applicable General conditions for the tests This clause of Part is applicable except as follows 5.8.2 Addition: If an appliance is marked for use at two different rated voltages, and the instructions indicate that it is suitable for use at two different ranges of voltages, the appliance is assumed to have two rated voltage ranges Classification This clause of Part is applicable except as follows 6.1 Modification: Animal shearers shall be class I, class II or class III BS EN 60335-2-8:2015 Washable shavers and wet shavers shall be II or class III 60335-2-8 © IEC:2012 – class 9– Other appliances having a rated voltage not exceeding 150 V shall be of class 0, class I, class II or class III Other appliances shall be class II or class III 6.2 Addition: Washable shavers and wet shavers shall be at least IPX7 However, parts that are intended to be fixed, and transformers with pins for insertion into socket-outlets, shall be at least IPX4 This classification does not apply to parts of class III construction Marking and instructions This clause of Part is applicable except as follows 7.1 Addition: Hand-held parts of washable shavers shall be marked with symbol IEC 60417-5574 (2002-10) Hand-held parts of wet shavers shall be marked with symbol IEC 60417-5582 (2002-10) 7.6 Addition: [symbol IEC 60417-5574 (2002-10)] suitable for cleaning under an open water tap 7.1 Addition: Normative references 60335-2-8 © IEC:2012 –9– BS ENsymbol 60335-2-8:2015+A1:2016 Hand-held partsstandards: of washable shavers shall be marked with IEC 60417-5574 Add the following – 19 – EN (2002-10) Other appliances having a rated voltage not exceeding 150 V shall 60335-2-8:2015+A1:2016 be of class 0, class I, class or class III EN ISOII 3744, Acoustics – Determination of sound power levels and sound energy levels of noise sources using sound pressure – Engineering methods an essentially free field (2002-10) over a reflecting Hand-held parts of wet shavers shall be marked withforsymbol IEC 60417-5582 plane (ISO 3744) shall be class II or class III Other appliances 7.6 Addition: EN ISO 4871, Acoustics – Declaration and verification of noise emission values of machinery and 6.2 Addition: equipment (ISO 4871) [symbol IEC 60417-5574 (2002-10)] suitable for cleaning under an open water tap Washable shavers and –wet shavers be at leastand IPX7 However, parts that are EN ISO 11203, Acoustics Noise emittedshall by machinery equipment – Determination of intended emission to be fixed, andlevels transformers pinsand for at insertion into socket-outlets, be at least sound pressure at a workwith station other specified positions fromshall the sound powerIPX4 level This classification does not apply to parts of class III construction (ISO 11203) [symbol IEC 60417-5582 (2002-10)] suitable for use in a bath or shower 7 Marking and instructions Marking and instructions 7.12 Addition: 7.10 Replace the first sentence of the fourth paragraph: This clause of Part is applicable except as follows The instructions for animal clippers shall state that the appliance is intended for trimming Devices, except for those on animal shearers, used to start/stop operational functions of the purposes only appliance, if any, shall be distinguished from other manual devices by means of shape, or size, or 7.1 Addition: surface texture, or position, etc If animal clippers are intended for household use only, this shall be stated Hand-held parts of washable shavers shall be marked with symbol IEC 60417-5574 7.12 Replace the fourth paragraph from Part by the following: (2002-10) The instructions for animal clippers for commercial use and animal shearers shall include Animal clipper, hair clipper, and appliances for manicure and pedicure can be used by children aged the substance of the following Hand-held wet shavers shall be marked with symbol IEC 60417-5582 (2002-10) from yearsparts underofsupervision WARNING: Cutting blades may become hot after prolonged use 7.6 Addition: Shaver, wet shaver, animal clipper, hair clipper, and appliances for manicure and pedicure can be used by children aged from years and above and persons with reduced physical, sensory or mental If symbol or IEC 60417-5574 (2002-10) or symbol 60417-5582 (2002-10) is used, its capabilities lack of60417-5574 experience and knowledge if theyIEC have been given supervision or instruction [symbol IEC (2002-10)] suitable for cleaning under an open water tap meaning shall be explained concerning use of the appliance in a safe way and understand the hazards involved Children shall not play with the appliance Cleaning and user maintenance shall not be made by children without The instructions for shavers, other than washable shavers or wet shavers, shall include the supervision substance of the following [symbol IEC 60417-5582 (2002-10)] suitable for use in a bath or shower Animal shearers can only be used by trained personnel. WARNING: Keep the appliance dry 7.12 Addition: Addition: The shaversshall with state detachable cords shall include The instructions instructions for for washable animal clippers that theinterconnection appliance is intended for trimming the substance of the following: purposes only WARNING: Detach the hand-held part from supply cleaning it in water If animal clippers are intended for household usethe only, this cord shallbefore be stated The instructions for animal clippers for commercial use and animal shearers shall include the substance of the following WARNING: Cutting blades may become hot after prolonged use If symbol IEC 60417-5574 (2002-10) or symbol IEC 60417-5582 (2002-10) is used, its meaning shall be explained The instructions for shavers, other than washable shavers or wet shavers, shall include the substance of the following WARNING: Keep the appliance dry The instructions for washable shavers with detachable interconnection cords shall include the substance of the following: BS EN 60335-2-8:2015 – 10 – 60335-2-8 IEC:2012 WARNING: Detach the hand-held part from the supply cord before cleaning it in©water 7.12.1 Addition: The installation instructions for washable shavers and wet shavers, other than those classified IPX7, shall state that the parts that have to be fixed must be installed so they cannot fall into water 7.14 Addition: 7.12.1 Addition: BS EN 60335-2-8:2015+A1:2016 – 20 – EN 60335-2-8:2015+A1:2016 The installation instructions for washable shavers and wet shavers, other than those classified IPX7, shall state that the parts that have to be fixed must be installed so they BS EN 60335-2-8:2015 cannot fall into water – 10 – 60335-2-8 © IEC:2012 7.14 Addition: EN 60335-2-8:2015 7.12.1 Addition: The height of symbol IEC 60417-5574 (2002-10) and symbol IEC 60417-5582 (2002-10) shall be least mm instructions for washable shavers and wet shavers, other than those Theat installation classified IPX7, shall state access that thetoparts that have to be fixed must be installed so they Protection against live parts cannot fall into water Protection against access to live parts Modification: 7.14 Addition: of Part Part is2applicable applicable clause of 11 is except as follows: This Replace the text in Part by “This clause of Part is applicable except as follows:” The height of symbol IEC 60417-5574 (2002-10) and symbol IEC 60417-5582 (2002-10) shall 8.1.1 least Add after the third paragraph the following sentence: be mm atStarting of motor-operated appliances Test probe 18 is not applied to animal shearers ThisProtection clause of Part is notaccess applicable against to live parts 8.2 Add to the compliance clause the following sentence: This clause18of is applicable Test Power probe isPart not applied to animal shearers. 10 input and current 20.2 Add to the compliance clause the following sentence: ThisStarting clause of of Part is applicable appliances motor-operated Test probe 18 is not applied to animal shearers This clause of Part is not applicable 11 Heating 22 Construction This clause of Part and is applicable 10 input current except as follows 22.12Power Modification Add to Note Z1 This 1is is notapplicable applicable to animal shearers 11.7 Replacement: This clause of Part Appliances intended for household use only are operated continuously for 10 11 Heating Animal shearers are operated until steady conditions are established Annexes This clause of Part is applicable except as follows The annexes of Partand are applicable exceptare as follows Animal clippers other appliances operated for 10 followed by a rest period of 10 min.Replacement: This cycle of operation is repeated until steady conditions are established 11.7 Appliances intended for household use only are operated continuously for 10 11.8 Addition: The temperature parts that are in contact with skin or hair in normal use, or are held in Animal shearersrise are of operated until steady conditions are established the hand, shall not exceed the limits specified for handles which are continuously held in normal The temperature rise of cutting blades of Animal use clippers and other appliances are operated foranimal 10 clippers followed for by commercial a rest perioduse of and animal shearers that may come in contact with the animal skin or hair in normal use is 10 This cycle of operation is repeated until steady conditions are established 50 K 11.8 Addition: 12 Void The temperature rise of parts that are in contact with skin or hair in normal use, or are held in the hand, shall not exceed the limits specified for handles which are continuously held in normal use The temperature rise of strength cutting blades of animaltemperature clippers for commercial use 13 Leakage current and electric at operating and animal shearers that may come in contact with the animal skin or hair in normal use is 50 ThisK.clause of Part is applicable 12 14 Void Transient overvoltages This clause of Part is applicable 13 Leakage current and electric strength at operating temperature This clause of Part is applicable 14 Transient overvoltages This clause of Part is applicable 12 Void – 21 – BS EN 60335-2-8:2015+A1:2016 EN 60335-2-8:2015+A1:2016 14 Transient overvoltages BS EN 60335-2-8:2015 This clause©ofIEC:2012 Part is applicable 60335-2-8 – 11 – 15 Moisture resistance This clause of Part is applicable 16 Leakage current and electric strength This clause of Part is applicable 17 Overload protection of transformers and associated circuits This clause of Part is applicable 18 Endurance This clause of Part is not applicable 19 Abnormal operation This clause of Part is applicable except as follows 19.1 Addition: Hand-held appliances are also subjected to the test of 19.101 19.7 Addition: EN 60335-2-8:2015 Appliances that are not hand-held or are not kept switched on by hand are tested for 19.10 Addition: Protection against access to live parts NOTE 101 The lowest possible load is obtained with the appliance operating under normal operation but after removal of any detachable part that may influence the load Modification: 19.101 Hand-held are placed a soft-wood board in the most unfavorable Replace the text in Partappliances by “This clause of Part 1on is applicable except as follows:” position They are supplied at rated voltage and operated until steady conditions are established 8.1.1 Add after the third paragraph the following sentence: Test probe 18 is not applied to animal shearers 20 Stability and mechanical hazards 8.2 Add to the compliance clause the following sentence: 18the is not applied toclause animal 20.2 probe Add to compliance theshearers following sentence: Test Test Mechanical probe 18 is notstrength applied to animal shearers. 21 This clause of Part is applicable except as follows 22 Construction 21.1 Addition: 22.12 Modification Blows with an impact energy of 0,5 J are only applied to those parts that could hit the floor if Add appliance to Note Z1 is This is not applicable to animal the dropped Three blows are shearers applied to other parts with an impact energy of 0,35 J Blows are not applied to cutting heads established BS EN 60335-2-8:2015+A1:2016 -2-8:2015 20 Stability and mechanical hazards – 22 – EN 60335-2-8:2015+A1:2016 This clause of Part is applicable Protection against access to live parts 21 Mechanical strength Modification: This clause of Part is applicable except as follows Replace the text in Part by “This clause of Part is applicable except as follows:” 21.1 8.1.1 Addition: Add after the third paragraph the following sentence: Blows with18 anisimpact energy of 0,5 shearers J are only applied to those parts that could hit the floor if Test probe not applied to animal the appliance is dropped Three blows are applied to other parts with an impact energy of 0,35 J to the compliance clause the following sentence: 8.2 Add BS EN 60335-2-8:2015 Test probe not applied to animal shearers Blows are 18 notisapplied to cutting heads – 12 – 60335-2-8 © IEC:2012 20.2 Add to the compliance clause the following sentence: 22 Construction Test probe 18 is not applied to animal shearers 12 – This of Part is applicable except as–follows 22 clause Construction BS EN 60335-2-8:2015 60335-2-8 © IEC:2012 Addition: 22 22.12Construction Modification 22.26 Hand-held of1iswashable shavers shall be class Add to Note parts Z1 This notapplicable applicable to animal III construction having a working This clause of Part is except as shearers follows voltage not exceeding 24 V 22.26 Addition: Hand-held parts of wet shavers shall be class III construction having a working voltage not exceeding 12 of V, except when they areshall beingbecharged, when the workinghaving voltage shall not Annexes Hand-held parts washable shavers class III construction a working exceed 24 V voltage not exceeding 24 V The annexes of Part are applicable except as follows Compliance is checked inspection and measurement Hand-held parts of wetby shavers shall beby class III construction having a working voltage not exceeding 12 V, except when they are being charged, when the working voltage shall not 22.36 Addition: exceed 24 V Hand-held shall bebyclass II construction or class III construction Complianceparts is checked inspection and by measurement For appliances 22.36 Addition:having a rated voltage not exceeding 150 V, hand-held parts except those of washable shavers and wet shavers may be of class construction Hand-held parts shall be class II construction or class III construction 22.40 Replacement: For appliances having a rated voltage not exceeding 150 V, hand-held parts except those of Animal shearers and animal clippers shall be fitted with a switch to control the motor washable shavers and wet shavers may be of class construction Compliance is checked by inspection 22.40 Replacement: 22.101 shearers Appliances not clippers have openings would small items to and Animal andshall animal shall bethat fitted with allow a switch to control thepenetrate motor touch live parts Compliance is checked by inspection Compliance is checked by inspection and by measuring the distance between the supporting surface and live parts through openings This distance at least mm However, if 22.101 Appliances shall not have openings that would shall allow be small items6 to penetrate and the appliance is fitted with legs, this distance is increased to 10 mm if the appliance is touch live parts intended to stand on a table and to 20 mm if it is intended to stand on the floor Compliance is checked by inspection and by measuring the distance between the supporting 22.102 and Shavers and hair clippers shall beThis constructed that penetration clippings surface live parts through openings distance so shall bethe at least mm of However, if cannot give rise to electrical or mechanical faults the appliance is fitted with legs, this distance is increased to 10 mm if the appliance is intended to stand on a table and to 20 mm if it is intended to stand on the floor Compliance is checked by inspection 22.102 Shavers and hair clippers shall be constructed so that the penetration of clippings 22.103 give Washable shaversorand wet shavers, cannot rise to electrical mechanical faults other than those classified IPX7, shall be constructed so that parts that are intended to be fixed can be fixed securely Compliance is checked by inspection Compliance is checked by inspection 22.103 Washable shavers and wet shavers, other than those classified IPX7, shall be NOTE Keyholesoslots, and similar means, without further means to prevent the appliance from being constructed that hooks parts that are intended to be fixed can be fixed securely inadvertently lifted off the support, are not considered to be adequate means for fixing the appliance securely – 23 – BS EN 60335-2-8:2015+A1:2016 EN 60335-2-8:2015+A1:2016 22.102 Shavers and hair clippers shall be constructed so that the penetration of clippings cannot give rise to electrical or mechanical faults Compliance is checked by inspection 22.103 Washable shavers and wet shavers, other than those classified IPX7, shall be constructed so that parts that are intended to be fixed can be fixed securely Compliance is checked by inspection NOTE Keyhole slots, hooks and similar means, without further means to prevent the appliance from being inadvertently lifted off the support, are not considered to be adequate means for fixing the appliance securely 23 Internal wiring This clause of Part is applicable 24 Components BS EN 60335-2-8:2015 60335-2-8 13 – This clause©ofIEC:2012 Part is applicable except as–follows 24.1.3 Addition: Switches incorporated in animal clippers for commercial use and animal shearers, and hair clippers for hairdressers, the number of cycles of operation declared for Subclause 7.1.4 of IEC 61058-1 shall be at least 50 000 For switches incorporated in hair clippers intended for household use only and animal clippers intended for household use only, the number of cycles of operation declared for Subclause 7.1.4 of IEC 61058-1 shall be at least 000 For switches incorporated in shavers intended for household use only, the number of cycles of operation declared for Subclause 7.1.4 of IEC 61058-1 shall be at least 000 25 Supply connection and external flexible cords This clause of Part is applicable except as follows 25.5 Addition: Type Z attachment is allowed for appliances intended for household use only Type X attachments are not allowed on appliances with an IP classification exceeding IPX4 25.7 Addition: Flat twin tinsel cord is allowed for appliances intended for household use only as long as they are fitted with a non-rewirable plug Rubber insulated supply cords of animal shearers shall be polychloroprene sheathed and not be lighter than ordinary polychloroprene sheathed flexible cord (code designation 60245 IEC 57) Supply cords shall have a length of at least 1,7 m !This requirement is not applicable to supply cord s on battery charging units." 25.14 Modification: The number of flexings for type Z attachment is 100 000 and for other attachments 50 000 Rubber insulated supply cords of animal shearers shall be polychloroprene sheathed and BS EN 60335-2-8:2015+A1:2016 EN 60335-2-8:2015+A1:2016 – 24 – supply cord 25.14 Modification: The number of flexings for type Z attachment is 100 000 and for other attachments 50 000 25.24 Addition: Interconnection cords of washable shavers shall be detachable Wet shavers shall not have an interconnection cord unless they cannot be operated when connected to the supply mains 26 Terminals for external conductors This clause of Part is applicable 27 Provision for earthing This clause of Part is applicable – 14 – 28 Screws and connections This clause of Part is applicable 29 Clearances, creepage distances and solid insulation This clause of Part is applicable 30 Resistance to heat and fire This clause of Part is applicable except as follows 30.2.3 Not applicable 31 Resistance to rusting This clause of Part is applicable 32 Radiation, toxicity and similar hazards This clause of Part is applicable BS EN 60335-2-8:2015 60335-2-8 © IEC:2012 – 25 – Annexes The annexes of Part are applicable except as follows Annex C (normative) Aging test on motors Modification: The value of p in Table C.1 is – 500 for appliances intended for household use only; – 000 for other appliances BS EN 60335-2-8:2015+A1:2016 EN 60335-2-8:2015+A1:2016 BS EN 60335-2-8:2015+A1:2016 EN 60335-2-8:2015+A1:2016 – 26 – Bibliography Bibliography Add the following references: The bibliography of Part is applicable except as follows Bibliography EN ISO 11688-1, Acoustics – Recommended practice for the design of low-noise machinery and Addition: equipment – Part 1: Planning (ISO/TR 11688-1) Add the following references: 1) EN ISO 12100-1:2003 , Safety of machinery – Basic concepts, general principles for design – 60335-2-32, Household similar – Safety –BS Part Particular IEC EN ISO 11688-1, Acoustics – and Recommended practiceappliances for the design of low-noise machinery and EN2-32: 60335-2-8:2015 Part 1: Basic terminology, methodology (ISOelectrical 12100-1:2003) requirements for 1: massage equipment – Part Planningappliances (ISO/TR 11688-1) – 16 – 60335-2-8 © IEC:2012 1) 1) EN Safety of of machinery machinery –– Basic Basic concepts, concepts, general general principles principles for for design design –– EN ISO ISO 12100-2:2003 12100-1:2003 ,, Safety Part 2: Technical principles (ISO 12100-2:2003) Part 1: Basic terminology, methodology (ISO 12100-1:2003) Bibliography 1) EN ISO 14121-1:2007 1), Safety of machinery – Risk assessment – Part 1: Principles – Basic concepts, general principles for design – EN ISO 12100-2:2003 , Safety of machinery _ (ISO 14121-1:2007) The bibliography of Part 1(ISO is applicable except as follows Part 2: Technical principles 12100-2:2003) 1) EN ISO 14121-1:2007 , Addition: (ISO 14121-1:2007) Safety of machinery – Risk assessment – Part 1: Principles IEC 60335-2-32, Household and similar electrical appliances – Safety – Part 2-32: Particular requirements for massage appliances _ 1) EN ISO 14121-1, EN ISO 12100-1 (ISO 12100:2010). 1) EN ISO 14121-1, (ISO 12100:2010) EN ISO 12100-1 and EN ISO 12100-2 are superseded by EN ISO 12100:2010, and EN ISO 12100-2 are superseded by 13 EN ISO 12100:2010, This page deliberately left blank NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW British Standards Institution (BSI) BSI is the national body responsible for preparing British Standards and other standards-related publications, information and services BSI is incorporated by Royal Charter British Standards and other standardization products are published by BSI Standards Limited About us Revisions We bring together business, industry, government, consumers, innovators and others to shape their combined experience and expertise into standards -based solutions Our British Standards and other publications are updated by amendment or revision The knowledge embodied in our standards has been carefully assembled in a dependable format and refined through our open consultation process Organizations of all sizes and across all sectors choose standards to help them achieve their goals Information on standards We can provide you with the knowledge that your organization needs to succeed Find out more about British Standards by visiting our website at bsigroup.com/standards or contacting our Customer Services team or Knowledge Centre Buying standards You can buy and download PDF versions of BSI publications, including British and adopted European and international standards, through our website at bsigroup.com/shop, where hard copies can also be purchased If you need international and foreign standards from other Standards Development Organizations, hard copies can be ordered from our Customer Services team Subscriptions Our range of subscription services are designed to make using standards easier for you For further information on our subscription products go to bsigroup.com/subscriptions With British Standards Online (BSOL) you’ll have instant access to over 55,000 British and adopted European and international standards from your desktop It’s available 24/7 and is refreshed daily so you’ll always be up to date You can keep in touch with standards developments and receive substantial discounts on the purchase price of standards, both in single copy and subscription format, by becoming a BSI Subscribing Member PLUS is an updating service exclusive to BSI Subscribing Members You will automatically receive the latest hard copy of your standards when they’re revised or replaced To find out more about becoming a BSI Subscribing Member and the benefits of membership, please visit bsigroup.com/shop With a Multi-User Network Licence (MUNL) you are able to host standards publications on your intranet Licences can cover as few or as many users as you wish With updates supplied as soon as they’re available, you can be sure your documentation is current For further information, email bsmusales@bsigroup.com BSI Group Headquarters 389 Chiswick High Road London W4 4AL UK We continually improve the quality of our products and services to benefit your business If you find an inaccuracy or ambiguity within a British Standard or other BSI publication please inform the Knowledge Centre Copyright All the data, software and documentation set out in all British Standards and other BSI publications are the property of and copyrighted by BSI, or some person or entity that owns copyright in the information used (such as the international standardization bodies) and has formally licensed such information to BSI for commercial publication and use Except as permitted under the Copyright, Designs and Patents Act 1988 no extract may be reproduced, stored in a retrieval system or transmitted in any form or by any means – electronic, photocopying, recording or otherwise – without prior written permission from BSI Details and advice can be obtained from the Copyright & Licensing Department Useful Contacts: Customer Services Tel: +44 845 086 9001 Email (orders): orders@bsigroup.com Email (enquiries): cservices@bsigroup.com Subscriptions Tel: +44 845 086 9001 Email: subscriptions@bsigroup.com Knowledge Centre Tel: +44 20 8996 7004 Email: knowledgecentre@bsigroup.com Copyright & Licensing Tel: +44 20 8996 7070 Email: copyright@bsigroup.com