AN INTERNATIONAL CODE 2015 ASME Boiler & Pressure Vessel Code 2015 Edition July 1, 2015 IX QUALIFICATION STANDARD FOR WELDING, BRAZING, AND FUSING PROCEDURES; WELDERS; BRAZERS; AND WELDING, BRAZING, AND FUSING OPERATORS ASME Boiler and Pressure Vessel Committee on Welding, Brazing, and Fusing Two Park Avenue • New York, NY • 10016 USA Date of Issuance: July 1, 2015 This international code or standard was developed under procedures accredited as meeting the criteria for American National Standards and it is an American National Standard The Standards Committee that approved the code or standard was balanced to assure that individuals from competent and concerned interests have had an opportunity to participate The proposed code or standard was made available for public review and comment that provides an opportunity for additional public input from industry, academia, regulatory agencies, and the public-at-large ASME does not “approve,” “rate,” or “endorse” any item, construction, proprietary device, or activity ASME does not take any position with respect to the validity of any patent rights asserted in connection with any items mentioned in this document, and does not undertake to insure anyone utilizing a standard against liability for infringement of any applicable letters patent, nor assume any such liability Users of a code or standard are expressly advised that determination of the validity of any such patent rights, and the risk of infringement of such rights, is entirely their own responsibility Participation by federal agency representative(s) or person(s) affiliated with industry is not to be interpreted as government or industry endorsement of this code or standard ASME accepts responsibility for only those interpretations of this document issued in accordance with the established ASME procedures and policies, which precludes the issuance of interpretations by individuals The endnotes and preamble in this document (if any) are part of this American National Standard ASME collective membership mark Certification Mark The above ASME symbol is registered in the U.S Patent Office “ASME” is the trademark of The American Society of Mechanical Engineers No part of this document may be reproduced in any form, in an electronic retrieval system or otherwise, without the prior written permission of the publisher Library of Congress Catalog Card Number: 56-3934 Printed in the United States of America Adopted by the Council of The American Society of Mechanical Engineers, 1914; latest edition 2015 The American Society of Mechanical Engineers Two Park Avenue, New York, NY 10016-5990 Copyright © 2015 by THE AMERICAN SOCIETY OF MECHANICAL ENGINEERS All rights reserved TABLE OF CONTENTS List of Sections Foreword Statement of Policy on the Use of the Certification Mark and Code Authorization in Advertising Statement of Policy on the Use of ASME Marking to Identify Manufactured Items Submittal of Technical Inquiries to the Boiler and Pressure Vessel Standards Committees Personnel Introduction Summary of Changes List of Changes in Record Number Order Cross-Referencing and Stylistic Changes in the Boiler and Pressure Vessel Code Part QG x xii xiv xiv xv xvii xxxiv xxxvii xli xliii General Requirements Scope Definitions Welding 15 Article I QW-100 QW-110 QW-120 QW-130 QW-140 QW-150 QW-160 QW-170 QW-180 QW-190 Welding General Requirements Scope Weld Orientation Test Positions for Groove Welds Test Positions for Fillet Welds Types and Purposes of Tests and Examinations Tension Tests Guided‐Bend Tests Notch‐Toughness Tests Fillet‐Weld Tests Other Tests and Examinations 15 15 15 15 16 16 17 18 19 19 21 Article II QW-200 QW-210 QW-220 QW-250 QW-290 Welding Procedure Qualifications General Preparation of Test Coupon Hybrid Welding Procedure Variables Welding Variables Temper Bead Welding 28 28 31 32 33 65 Article III QW-300 QW-310 QW-320 QW-350 QW-360 QW-380 Welding Performance Qualifications General Qualification Test Coupons Retests and Renewal of Qualification Welding Variables for Welders Welding Variables for Welding Operators Special Processes 69 69 71 72 73 74 75 Article IV QW-400 QW-410 QW-420 QW-430 QW-440 QW-450 Welding Data Variables Technique Base Metal Groupings F‐Numbers Weld Metal Chemical Composition Specimens 77 77 87 92 161 172 173 QG-100 QG-109 Part QW iii QW-460 QW-470 Graphics Etching — Processes and Reagents 179 223 Article V QW-500 QW-510 QW-520 QW-530 QW-540 Standard Welding Procedure Specifications (SWPSs) General Adoption of SWPSs Use of SWPSs Without Discrete Demonstration Forms Production Use of SWPSs 225 225 225 225 226 226 Brazing 227 Article XI QB-100 QB-110 QB-120 QB-140 QB-150 QB-160 QB-170 QB-180 Brazing General Requirements Scope Braze Orientation Test Positions for Lap, Butt, Scarf, or Rabbet Joints Types and Purposes of Tests and Examinations Tension Tests Guided‐Bend Tests Peel Tests Sectioning Tests and Workmanship Coupons 227 227 227 227 228 228 229 230 230 Article XII QB-200 QB-210 QB-250 Brazing Procedure Qualifications General Preparation of Test Coupon Brazing Variables 231 231 233 233 Article XIII QB-300 QB-310 QB-320 QB-350 Brazing Performance Qualifications General Qualification Test Coupons Retests and Renewal of Qualification Brazing Variables for Brazers and Brazing Operators 237 237 238 238 238 Article XIV QB-400 QB-410 QB-420 QB-430 QB-450 QB-460 Brazing Data Variables Technique P‐Numbers F‐Numbers Specimens Graphics 239 239 240 240 240 243 247 Plastic Fusing 266 Article XXI QF-100 QF-110 QF-120 QF-130 QF-140 Plastic Fusing General Requirements Scope Fused Joint Orientation Test Positions Data Acquisition and Evaluation Examinations and Tests 266 266 266 266 266 267 Article XXII QF-200 QF-220 QF-250 Fusing Procedure Qualifications General Standard Fusing Procedure Specifications Fusing Variables 272 272 275 277 Plastic Fusing Performance Qualifications General Tests Type of Test Required Limits of Qualified Positions and Diameters (See QF-461) Fusing Operators 279 279 279 279 279 279 Part QB Part QF Article XXIII QF-300 QF-301 QF-302 QF-303 QF-305 iv QF-310 QF-311 QF-320 QF-321 QF-322 QF-360 QF-361 Qualification Test Coupons Test Coupons Retests and Renewal of Qualification Retests Expiration and Renewal of Qualification Essential Variables for Performance Qualification of Fusing Operators General 280 280 280 280 280 280 280 Article XXIV QF-400 QF-401 QF-402 QF-403 QF-404 QF-405 QF-406 QF-407 QF-420 QF-450 QF-460 QF-461 QF-480 QF-490 QF-491 QF-492 Plastic Fusing Data Variables General Joints Material Position Thermal Conditions Equipment Technique Material Groupings Pipe Fusing Limits Graphics Positions Forms Definitions General Definitions 282 282 282 282 282 282 282 282 282 283 284 284 284 295 305 305 305 Nonmandatory Appendix B Welding and Brazing Forms 306 Nonmandatory Appendix D P‐Number Listing 317 Mandatory Appendix E Permitted SWPSs 335 Mandatory Appendix F Standard Units for Use in Equations 338 Nonmandatory Appendix G Guidance for the Use of U.S Customary and SI Units in the ASME Boiler and Pressure Vessel Code 339 Nonmandatory Appendix H Waveform Controlled Welding 342 Mandatory Appendix J Guideline for Requesting P-Number Assignments for Base Metals not Listed in Table QW/QB-422 344 Guidance on Invoking Section IX Requirements in Other Codes, Standards, Specifications, and Contract Documents 345 Welders and Welding Operators Qualified Under ISO 9606-1:2012 and ISO 14732-2013 347 Nonmandatory Appendix K Nonmandatory Appendix L FIGURES QG-109.2.1 QG-109.2.2 QW-191.1.2.2(b)(4) QW-461.1 QW-461.2 QW-461.3 QW-461.4 QW-461.5 QW-461.6 QW-461.7 QW-461.8 QW-461.10 Typical Single and Multibead Layers Typical Single Bead Layers Rounded Indication Charts Positions of Welds — Groove Welds Positions of Welds — Fillet Welds Groove Welds in Plate — Test Positions Groove Welds in Pipe — Test Positions Fillet Welds in Plate — Test Positions Fillet Welds in Pipe — Test Positions Stud Welds — Test Positions Stud Welds — Welding Positions Rotating Tool Design Characteristics (FSW) Referenced in QW-410 v 14 14 22 179 180 181 181 182 183 184 184 186 QW-462.1(a) QW-462.1(b) QW-462.1(c) QW-462.1(d) QW-462.1(e) QW-462.2 QW-462.3(a) QW-462.3(b) QW-462.4(a) QW-462.4(b) QW-462.4(c) QW-462.4(d) QW-462.5(a) QW-462.5(b) QW-462.5(c) QW-462.5(d) QW-462.5(e) QW-462.7.1 QW-462.7.2 QW-462.7.3 QW-462.8.1 QW-462.8.2 QW-462.9 QW-462.12 QW-462.13 QW-463.1(a) QW-463.1(b) QW-463.1(c) QW-463.1(d) QW-463.1(e) QW-463.1(f) QW-463.2(a) QW-463.2(b) QW 463.2(c) QW-463.2(d) QW-463.2(e) QW-463.2(f) QW-463.2(g) QW-463.2(h) QW-464.1 QW-464.2 QW-466.1 QW-466.2 QW-466.3 QW-466.4 QW-466.5 QW-466.6 QW-469.1 QW-469.2 QB-461.1 QB-461.2 Tension — Reduced Section — Plate Tension — Reduced Section — Pipe Tension — Reduced Section Alternate for Pipe Tension — Reduced Section — Turned Specimens Tension — Full Section — Small Diameter Pipe Side Bend Face and Root Bends — Transverse Face and Root Bends — Longitudinal Fillet Welds in Plate — Procedure Fillet Welds in Plate — Performance Fillet Welds in Pipe — Performance Fillet Welds in Pipe — Procedure Chemical Analysis and Hardness Specimen Corrosion‐Resistant and Hard‐Facing Weld Metal Overlay Chemical Analysis Specimen, Hard‐Facing Overlay Hardness, and Macro Test Location (s) for Corrosion‐Resistant and Hard‐Facing Weld Metal Overlay Pipe Bend Specimen — Corrosion‐Resistant Weld Metal Overlay Plate Bend Specimens — Corrosion‐Resistant Weld Metal Overlay Plate Macro, Hardness, and Chemical Analysis Specimens — Corrosion‐Resistant and Hard‐Facing Weld Metal Overlay Resistance Seam Weld Test Coupon Seam Weld Section Specimen Removal Resistance Weld Nugget Section Test Specimens Spot Welds in Sheets Seam Weld Peel Test Specimen and Method Spot Welds in Sheet Nomenclature for Temper Bead Welding Measurement of Temper Bead Overlap Plates — Less Than 3/4 in (19 mm) Thickness Procedure Qualification Plates — 3/4 in (19 mm) and Over Thickness and Alternate From 3/8 in (10 mm) but Less Than 3/4 in (19 mm) Thickness Procedure Qualification Plates — Longitudinal Procedure Qualification Procedure Qualification Procedure Qualification Notch‐Toughness Test Specimen Location Plates — Less Than 3/4 in (19 mm) Thickness Performance Qualification Plates — 3/4 in (19 mm) and Over Thickness and Alternate From 3/8 in (10 mm) but Less Than 3/4 in (19 mm) Thickness Performance Qualification Plates — Longitudinal Performance Qualification Performance Qualification Performance Qualification Pipe — NPS 10 (DN 250) Assembly Performance Qualification NPS (DN 150) or NPS (DN 200) Assembly Performance Qualification Performance Qualification Procedure Qualification Test Coupon and Test Specimens Performance Qualification Test Coupons and Test Specimens Test Jig Dimensions Guided‐Bend Roller Jig Guided‐Bend Wrap Around Jig Stud‐Weld Bend Jig Torque Testing Arrangement for Stud Welds Suggested Type Tensile Test Figure for Stud Welds Butt Joint Alternative Butt Joint Flow Positions Test Flow Positions vi 187 187 188 188 189 190 191 192 192 193 193 194 194 195 196 197 198 198 199 199 200 201 202 206 207 207 207 208 208 209 209 210 210 211 211 212 212 213 214 215 216 217 219 219 220 221 222 222 222 247 248 QB-462.1(a) QB-462.1(b) QB-462.1(c) QB-462.1(e) QB-462.1(f) QB-462.2(a) QB-462.2(b) QB-462.3 QB-462.4 QB-462.5 QB-463.1(a) QB-463.1(b) QB-463.1(c) QB-463.1(d) QB-463.1(e) QB-463.2(a) QB-463.2(b) QB-463.2(c) QB-466.1 QB-466.2 QB-466.3 QF-221.1 QF-461.1 QF-461.2 QF-462 QF-463 QF-464 QF-465 QF-466 QF-467 QF-468 QF-469 QF-470 TABLES QW-252 QW-252.1 QW-253 QW-253.1 QW-254 QW-254.1 QW-255 QW-255.1 QW-256 QW-256.1 QW-257 QW-257.1 QW-258 QW-258.1 QW-259 QW-260 QW-261 QW-262 Tension — Reduced Section for Butt and Scarf Joints — Plate Tension — Reduced Section for Butt, Lap, and Scarf Joints — Pipe Tension — Reduced Section for Lap and Rabbet Joints — Plate Tension — Full Section for Lap, Scarf, and Butt Joints — Small Diameter Pipe Support Fixture for Reduced‐Section Tension Specimens Transverse First and Second Surface Bends — Plate and Pipe Longitudinal First and Second Surface Bends — Plate Lap Joint Peel Specimen Lap Joint Section Specimen (See QB-181) Workmanship Coupons Plates Procedure Qualification Plates Procedure Qualification Plates Procedure Qualification Plates Procedure Qualification Pipe — Procedure Qualification Plates Performance Qualification Plates Performance Qualification Pipe Performance Qualification Guided‐Bend Jig Guided‐Bend Roller Jig Guided‐Bend Wrap Around Jig Required Minimum Melt Bead Size Fusing Positions Fusing Test Positions Cross Section of Upset Beads for Butt-Fused PE Pipe Bend Test Specimen Removal, Configuration, and Testing HSTIT Specimen Configuration and Dimensions HSTIT Specimen Failure Examples Electrofusion Crush Test Electrofusion Bend Test Fusion Zone Void Criteria Electrofusion Peel Test Short-Term Hydrostatic Test Specimen Welding Variables Procedure Specifications (WPS) — Oxyfuel Gas Welding (OFW) Welding Variables Procedure Specifications (WPS) — Oxyfuel Gas Welding (OFW) Welding Variables Procedure Specifications (WPS) — Shielded Metal‐Arc Welding (SMAW) Welding Variables Procedure Specifications (WPS) — Shielded Metal‐Arc Welding (SMAW) Welding Variables Procedure Specifications (WPS) — Submerged‐Arc Welding (SAW) Welding Variables Procedure Specifications (WPS) — Submerged‐Arc Welding (SAW) Welding Variables Procedure Specifications (WPS) — Gas Metal‐Arc Welding (GMAW and FCAW) Welding Variables Procedure Specifications (WPS) — Gas Metal‐Arc Welding (GMAW and FCAW) Welding Variables Procedure Specifications (WPS) — Gas Tungsten‐Arc Welding (GTAW) Welding Variables Procedure Specifications (WPS) — Gas Tungsten‐Arc Welding (GTAW) Welding Variables Procedure Specifications (WPS) — Plasma‐Arc Welding (PAW) Welding Variables Procedure Specifications (WPS) — Plasma‐Arc Welding (PAW) Welding Variables Procedure Specifications (WPS) — Electroslag Welding (ESW) Welding Variables Procedure Specifications (WPS) — Electroslag Welding (ESW) Welding Variables Procedure Specifications (WPS) — Electrogas Welding (EGW) Welding Variables Procedure Specifications (WPS) — Electron Beam Welding (EBW) Welding Variables Procedure Specifications (WPS) — Stud Welding Welding Variables Procedure Specifications (WPS) — Inertia and Continuous Drive Friction Welding vii 249 250 251 252 253 254 254 255 255 256 257 257 258 259 260 261 262 263 264 265 265 276 284 285 286 287 289 290 291 292 293 294 295 34 35 36 37 38 40 41 43 44 46 47 49 51 52 53 54 55 56 QW-263 QW-264 QW-264.1 QW-265 QW-266 QW-267 QW-268 QW-269 QW-269.1 QW-290.4 QW-352 QW-353 QW-354 QW-355 QW-356 QW-357 QW-416 QW/QB-422 QW-432 QW-442 QW-451.1 QW-451.2 QW-451.3 QW-451.4 QW-452.1(a) QW-452.1(b) QW-452.3 QW-452.4 QW-452.5 QW-452.6 QW-453 QW-461.9 QW-462.10(a) QW-462.10(b) QW-462.10(c) QW-473.3-1 QB-252 QB-253 QB-254 QB-255 QB-256 QB-257 QB-432 QB-451.1 QB-451.2 QB-451.3 QB-451.4 QB-451.5 QB-452.1 QB-452.2 QF-144.2 QF-144.2.3 QF-202.2.2 QF-221.2 QF-222.1 Welding Variables Procedure Specifications (WPS) — Resistance Welding Welding Variables Procedure Specifications (WPS) — Laser Beam Welding (LBW) Welding Variables Procedure Specifications (WPS) — Laser Beam Welding (LBW) Welding Variables Procedure Specifications (WPS) — Flash Welding Welding Variables Procedure Specifications (WPS) — Diffusion Welding (DFW) Welding Variables Procedure Specifications — Friction Stir Welding (FSW) Welding Variables for Temper Bead Procedure Qualification Oxyfuel Gas Welding (OFW) Shielded Metal‐Arc Welding (SMAW) Semiautomatic Submerged‐Arc Welding (SAW) Semiautomatic Gas Metal‐Arc Welding (GMAW) Manual and Semiautomatic Gas Tungsten‐Arc Welding (GTAW) Manual and Semiautomatic Plasma‐Arc Welding (PAW) Welding Variables Ferrous/Nonferrous P‐Numbers F‐Numbers A‐Numbers Groove‐Weld Tension Tests and Transverse‐Bend Tests Groove‐Weld Tension Tests and Longitudinal‐Bend Tests Fillet‐Weld Tests Fillet Welds Qualified by Groove‐Weld Tests Test Specimens Thickness of Weld Metal Qualified Groove‐Weld Diameter Limits Small Diameter Fillet‐Weld Test Fillet‐Weld Test Fillet Qualification by Groove‐Weld Tests Procedure/Performance Qualification Thickness Limits and Test Specimens for Hard‐Facing (Wear‐Resistant) and Corrosion‐Resistant Overlays Performance Qualification — Position and Diameter Limitations Shear Strength Requirements for Spot or Projection Weld Specimens Shear Strength Requirements for Spot or Projection Weld Specimens Shear Strength Requirements for Spot or Projection Weld Specimens Makeup of Equations for Aqua Regia and Lepito’s Etch Torch Brazing (TB) Furnace Brazing (FB) Induction Brazing (IB) Resistance Brazing (RB) Dip Brazing — Salt or Flux Bath (DB) Dip Brazing — Molten Metal Bath (DB) F‐Numbers Tension Tests and Transverse‐Bend Tests — Butt and Scarf Joints Tension Tests and Longitudinal Bend Tests — Butt and Scarf Joints Tension Tests and Peel Tests — LAP Joints Tension Tests and Section Tests — Rabbet Joints Section Tests — Workmanship Coupon Joints Peel or Section Tests — Butt, Scarf, Lap, Rabbet Joints Section Tests — Workmanship Specimen Joints Testing Speed Requirements Electrofusion Procedure Qualification Test Coupons Required Maximum Heater Plate Removal Time for Pipe-to-Pipe Fusing Electrofusion Material Combinations viii 57 58 59 60 61 62 62 62 62 66 73 73 73 73 74 74 91 93 162 172 173 174 174 174 175 175 176 176 176 177 177 185 203 204 205 224 233 234 234 235 235 236 241 243 243 244 244 245 246 246 270 271 274 276 277 QF-254 QF-255 QF-362 QF-422 QF-452.3 F-100 FORMS QF-482(a) QF-482(b) QF-483(a) QF-483(a) QF-483(b) QF-483(b) QF-483(b) QF-484(a) QF-484(b) QF-485 QW-482 QW-483 QW-484A QW-484B QW-485 QB-482 QB-483 QB-484 Fusing Variables Procedure Specification Fusing Variables Procedure Specification Essential Variables Applicable to Fusing Operators Material Grouping Pipe Fusing Diameter Limits Standard Units for Use in Equations 278 278 280 283 284 338 296 297 298 299 300 301 302 303 304 305 307 309 311 312 313 314 315 316 ix SECTION IX — CUMULATIVE INDEX — INTERPRETATIONS VOLS 12-63 Location Part QW (Cont'd) QW-380 QW-381 QW-381.1(b) QW-382 QW-383 QW-400 QW-401.3 QW-401.15 QW-402 QW-402.3 QW-402.4 QW-402.5 QW-402.6 QW-402.10 QW-402.11 QW-402.12 QW-402.14 QW-403 QW-403.1 QW-403.5 QW-403.6 Interpretation File No Page No IX-89-71 IX-89-92 BC90-039 BC90-681, BC90-691 BC86-061 BC86-457 BC87-036 BC87-090 BC93-392 BC98-447 14-1878 BC90-518 BC90-530 BC86-222 BC91-085 BC83-303 BC03-469 BC03-1246 08-576 BC89-174 BC90-045 10-496 BC86-400 BC89-174 BC86-400 BC82-098 BC82-098 BC83-230 BC89-364 BC87-253 BC98-009 BC98-009 BC82-496 BC84-054 BC82-385 BC88-403 BC95-194 BC83-530 BC84-397 BC85-532 BC87-136 BC87-139 BC89-096 BC89-103 BC90-443 BC90-515 BC00-470 BC95-318 BC02-2693 BC04-1418 14-1656 BC84-417 BC88-171 BC90-734 BC90-872 BC92-217 BC93-151 BC03-1246 BC04-1595 08-576 12-635 14-537 14-1618 233 IX-86-27 IX-86-58 IX-86-66 IX-86-71 IX-92-72 IX-98-14 IX-15-19 IX-92-02 IX-92-04 IX-86-32 IX-89-101 IX-83-82 IX-01-39 IX-04-04 IX-07-09 IX-89-28 IX-89-53 IX-10-21 IX-86-54 IX-89-28 IX-86-54 IX-83-04 IX-83-04 IX-83-71 IX-89-42 IX-86-80 IX-98-06 IX-98-06 IX-83-20 IX-83-116 IX-83-45 IX-89-14 IX-95-24 IX-83-92 IX-83-135 IX-86-15 IX-86-75 IX-86-78 IX-89-23 IX-89-26 IX-89-75 IX-89-78 IX-92-70R IX-95-21 IX-01-30 IX-04-16 IX-15-15 IX-83-148 IX-89-07 IX-89-86 IX-89-96 IX-92-50 IX-92-87 IX-04-04 IX-04-15 IX-07-09 IX-13-01 IX-15-03 IX-15-14 Location Part QW (Cont'd) QW-403.8 QW-403.9 248 129 152 155 157 312 397 536 262 263 138 252 52 453 458 488 203 219 509 146 203 146 8 43 215 167 389 389 14 77 30 187 359 56 87 123 165 166 196 197 235 236 425 353 446 471 534 95 184 245 250 293 323 458 467 488 515 530 534 QW-403.10 QW-403.11 QW-403.12 QW-403.16 QW-403.18 QW-404 QW-404.4 QW-404.5 QW-404.5(b) QW-404.9 QW-404.12 QW-404.13 QW-404.14 QW-404.15 QW-404.22 (e) Interpretation File No Page No IX-83-97 IX-83-127 IX-83-152 IX-04-09 IX-95-28 IX-95-33 IX-01-01 IX-83-11 IX-83-35 IX-83-56 IX-86-75 IX-89-75 IX-89-84 IX-89-88 IX-89-61 IX-89-20 IX-89-82 IX-89-91 IX-83-106 IX-83-137 IX-86-41 IX-83-37 IX-86-03 IX-86-65 IX-86-76 IX-89-105 IX-98-19 IX-10-21 IX-83-10 IX-83-87 IX-13-17 IX-83-176 IX-83-140R IX-86-57 IX-86-84 IX-89-34 IX-89-55 IX-89-58 IX-10-31 IX-10-33 IX-10-13 IX-83-46 IX-83-59 IX-83-61 IX-83-84 IX-83-96 IX-83-169 IX-95-37 IX-92-21 IX-13-19 IX-83-06 IX-83-47 IX-83-97 IX-83-100 IX-83-89 IX-89-68 IX-13-24 IX-89-47 IX-83-22 IX-89-91 IX-07-07E BC83-444 BC84-224 BC84-648 BC04-065 BC96-002 BC96-001 BC00-514 BC82-300 BC82-599 BC83-078 BC87-136 BC90-443 BC90-664 BC90-768 BC90-252 BC88-478 BC90-531 BC90-680 BC83-630 BC84-399 BC86-330 BC82-770 BC85-293 BC87-031A BC87-137 BC91-119 BC99-409 10-496 BC82-299 BC83-340 13-161 BC85-088 BC84-250* BC86-263 BC87-491 BC89-172 BC89-371 BC90-249 11-918 11-1339 09-1368 BC82-751 BC82-614 BC82-831 BC83-398 BC83-442 BC85-089 BC96-315 BC91-397 13-727 BC82-245 BC82-790 BC83-444 BC83-563 BC83-402 BC90-349 14-370 BC89-370 BC82-516 BC90-680 08-40 62 83 96 464 360 367 419 11 25 36 165 235 244 246 223 194 243 247 67 87 141 26 114 155 166 254 409 509 10 54 524 107 137 151 174 211 220 221 512 512 503 31 37 39 53 62 105 369 270 525 32 62 63 55 227 526 217 15 247 497 SECTION IX — CUMULATIVE INDEX — INTERPRETATIONS VOLS 12-63 Location Part QW (Cont'd) QW-404.23 QW-404.24 QW-404.25 QW-404.26 QW-404.27 QW-404.28 QW-404.30 QW-404.31 QW-404.32 QW-404.33 QW-404.36 QW-405.1 QW-405.2 QW-405.3 QW-406.1 QW-406.2 QW-406.3 QW-407 QW-407.1 QW-407.1(b) QW-407.2 QW-407.4 Interpretation File No Page No IX-07-04 IX-10-38 IX-10-16 IX-89-80 IX-89-80 IX-10-16 IX-83-100 IX-89-61 IX-89-20 IX-89-24 IX-13-17 IX-89-56 IX-83-112 IX-01-01 IX-01-37 IX-04-19 IX-89-20 IX-89-24 IX-83-50 IX-04-28 IX-13-23 IX-83-177 IX-86-86 IX-92-01 IX-98-15 IX-10-20 IX-83-161 IX-83-165 IX-83-161 IX-92-57 IX-83-130 IX-86-04 IX-86-20 IX-86-76 IX-83-29 IX-83-30 IX-98-10 BC07-1343 12-47 10-1159 BC90-536 BC90-536 10-1159 BC83-563 BC90-252 BC88-478 BC89-097 13-161 BC90-036 BC84-038 BC00-514 BC03-263 BC05-26 BC88-478 BC89-097 BC82-872 BC06-323 13-1559 BC85-092 BC87-494 BC90-501 BC98-448 10-1487 BC84-618 BC85-024 BC84-618 BC92-354 BC84-252 BC85-304 BC86-010 BC87-137 BC82-763 BC82-243 BC97-306, BC97-308 BC01-813 BC03-1212 BC05-293 BC07-1708 BC82-097* BC86-223 BC06-462 BC06-285 12-1230 BC82-763 BC83-294 BC84-584 BC93-586 BC04-1595 BC07-1708 09-513 14-2010 BC82-300 BC82-599 BC85-553 BC91-614 BC01-615 BC04-1301 482 514 504 237 237 504 63 223 194 196 524 221 70 419 452 472 194 196 33 478 526 108 175 285 397 506 101 103 101 296 84 114 125 166 18 18 IX-01-20 IX-04-03 IX-04-20 IX-07-06 IX-81-31R IX-86-47 IX-04-29 IX-07-01 IX-13-07 IX-83-29 IX-83-86 IX-83-145 IX-92-84 IX-04-15 IX-07-06 IX-10-08 IX-15-22 IX-83-11 IX-83-35 IX-86-23 IX-92-33 IX-01-17 IX-04-22 Location Part QW (Cont'd) QW-408 QW-408.2 QW-408.3 QW-408.8 QW-408.9 QW-409 QW-409.1 QW-409.2 QW-409.4 QW-409.8 QW-410 QW-410.1 QW-410.7 QW-410.9 QW-410.15 QW-410.25 QW-410.26 QW-410.38 QW-410.42 QW-410.51 QW-415 395 435 458 472 483 143 478 481 517 18 54 90 318 467 483 501 537 11 25 127 280 434 473 QW-416 QW-420 QW-420.1 QW-420.2 QW-422 QW-423 (f) Interpretation File No Page No IX-89-16 IX-95-11 IX-92-62 IX-95-16 IX-15-21 IX-86-67 IX-83-168 IX-83-146 IX-86-67 IX-83-26 IX-83-33 IX-83-175 IX-92-40 IX-92-87 IX-92-88 IX-04-12 IX-04-14 IX-13-11 IX-07-03 IX-10-24 IX-01-28 IX-89-19 IX-89-36 IX-92-88 IX-95-18 IX-04-17 IX-13-11 IX-10-21 IX-13-23 IX-86-55 IX-86-60 IX-13-12 IX-86-44 IX-86-63 IX-83-69 IX-86-26 IX-04-02 IX-98-07 IX-01-06R IX-89-79 IX-89-82 IX-86-72 IX-86-86 IX-10-30 IX-07-05 IX-95-07 IX-01-07 IX-83-34 IX-83-131 IX-86-88 IX-89-14 IX-89-36 IX-89-88 IX-92-08 IX-92-18 IX-95-05 IX-07-14 IX-13-31 IX-86-17 IX-89-15 IX-92-18 IX-01-31 BC88-405 BC95-002 BC92-425 BC95-095 14-1943 BC87-038 BC85-059 BC84-619 BC87-038 BC82-182 BC82-617 BC85-038 BC92-110 BC93-151 BC93-593 BC04-1013 BC04-1592 13-274 BC07-1041 11-216 BC02-2691 BC88-476 BC89-357 BC93-593 BC95-220 BC05-24 13-274 10-496 13-1559 BC86-426 BC86-514A 12-1529 BC86-365 BC86-520 BC82-233 BC86-059 BC03-1029 BC98-009 BC98-240* BC90-531 BC90-531 BC87-091 BC87-494 10-1189 BC04-600 BC94-522 BC01-029 BC82-514 BC84-365 BC88-041 BC88-403 BC89-357 BC90-768 BC91-257 BC91-389 BC94-365 09-486 14-510 BC85-554 BC88-404 BC91-389 BC02-2694 188 344 304 346 536 155 104 90 155 17 19 107 284 323 323 466 466 521 481 510 445 194 212 323 351 471 521 509 526 146 152 522 142 154 42 129 457 390 426 237 243 158 175 511 482 343 427 25 85 176 187 212 246 265 297 336 493 529 124 183 297 446 SECTION IX — CUMULATIVE INDEX — INTERPRETATIONS VOLS 12-63 Location Part QW (Cont'd) QW-423.1 QW-424 QW-424.1 QW-432 QW-433 QW-442 QW-450 QW-450 vs QW-461 QW-451 QW-451.1 QW-451.3 Interpretation File No Page No IX-89-58 IX-92-65 IX-13-13 IX-89-05 IX-89-26 IX-89-41 IX-89-75 IX-89-88 IX-95-22 IX-89-58 IX-10-12 IX-10-39 IX-83-24 IX-80-52R IX-92-99 BC90-249 BC93-148 12-2295 BC88-168 BC89-103 BC89-363 BC90-443 BC90-768 BC95-251 BC90-249 10-13 12-178 BC82-588 BC80-435* BC93-762, BC93-769 BC98-131 10-1918 BC89-369 BC82-302 BC83-300 BC81-702 BC82-237 BC82-265 BC82-757 BC83-222 BC83-349 BC83-471 BC84-434 BC85-092 BC86-101 BC88-171 BC90-253 BC90-532 BC91-022 BC91-390 BC91-586 BC92-097 BC92-011A BC97-479 BC98-237, BC98-238 BC03-1246 BC03-1583 BC82-423 BC82-822 BC83-395 BC83-396 BC83-284 BC83-551 BC83-645 BC86-280 BC86-281 BC88-474 BC91-124 BC02-4075 BC04-599 14-786 BC86-329 BC92-276 BC92-308 BC05-1404 221 305 522 188 197 214 235 246 353 221 502 514 16 49 IX-98-08 IX-10-23 IX-89-46 IX-83-14 IX-83-78 IX-83-01 IX-83-05 IX-83-08 IX-83-36 IX-83-64 IX-83-104 IX-83-105 IX-83-141 IX-83-177 IX-86-31 IX-89-07 IX-89-62 IX-89-83 IX-89-99 IX-92-19 IX-92-34 IX-92-37 IX-92-68 IX-98-03 IX-98-12 IX-04-04 IX-04-05 IX-83-18 IX-83-43 IX-83-81 IX-83-88 IX-83-94 IX-83-102 IX-83-122 IX-86-36 IX-86-48 IX-89-18 IX-89-107 IX-01-35 IX-04-11 IX-15-05 IX-86-40 IX-92-51 IX-92-56 IX-04-25 Location Part QW (Cont'd) QW-452 QW-452.1 327 390 509 216 12 50 10 25 40 66 66 89 108 137 184 224 243 251 269 281 282 306 383 QW-452.1(b) QW-452.3 QW-452.4 396 458 458 14 29 51 54 61 65 80 139 143 193 255 451 465 530 141 294 295 474 QW-452.5 QW-452.6 QW-453 QW-461.1 QW-461.1(a) (g) Interpretation File No Page No IX-83-07 IX-83-16 IX-83-67 IX-83-104 IX-86-30 IX-86-39 IX-89-02 IX-83-66 IX-83-88 IX-83-90 IX-89-06 IX-89-21 IX-89-52 IX-89-64 IX-89-95 IX-89-107 IX-92-35 IX-92-36 IX-92-53 IX-92-59 IX-92-89 IX-01-27 IX-10-23 IX-10-35 IX-15-08 IX-83-22 IX-83-23 IX-83-66 IX-83-158 IX-86-29 IX-89-09 IX-89-69 IX-89-94 IX-89-104 IX-89-106 IX-92-59 IX-92-89 IX-95-04 IX-04-07 IX-13-22 IX-92-45 IX-92-51 IX-10-06 IX-10-27 IX-89-57 IX-92-05 IX-92-72 IX-95-23 IX-95-41 IX-98-05 IX-98-17 IX-10-11 IX-15-12 IX-15-07 IX-83-65 BC82-246 BC82-396 BC83-123 BC83-349 BC86-104 BC86-299 BC88-090 BC83-058 BC83-396 BC83-407 BC88-169 BC89-031 BC90-044 BC90-297 BC90-869 BC91-124 BC91-277 BC91-616 BC92-254 BC92-206 BC93-653 BC02-111 10-1918 11-2030 14-1080 BC82-516 BC82-530 BC83-058 BC84-368 BC86-103 BC88-397 BC90-401 BC90-785 BC91-097 BC91-120 BC92-206 BC93-653 BC94-296 BC03-1686 13-1154 BC92-238 BC92-276 08-210 08-210 BC90-040 BC90-632 BC93-392 BC95-428 BC97-028 BC98-009 BC98-055 09-2141 14-1107 14-973 BC83-225 13 41 66 131 140 181 41 54 55 183 195 219 225 250 255 281 282 294 303 324 441 509 513 531 15 15 41 99 130 185 227 249 253 254 303 324 335 459 526 292 294 496 510 221 263 312 353 376 389 403 502 533 531 40 SECTION IX — CUMULATIVE INDEX — INTERPRETATIONS VOLS 12-63 Location Part QW (Cont'd) QW-461.9 QW-462 QW-462.1 QW-462.1(a) QW-462.1(d) QW-462.1(e) QW-462.3(a) QW-462.3(b) QW-462.4 QW-462.4(a) Interpretation File No Page No IX-83-28 IX-83-44 IX-83-53 IX-83-134 IX-86-29 IX-89-98 IX-92-15 IX-92-41 IX-92-46 IX-92-72 IX-92-90 IX-04-07 IX-04-24 IX-13-26 IX-15-01 IX-86-09 IX-89-102 IX-92-76 IX-95-02 IX-83-110 IX-92-29 IX-98-09 IX-86-45 IX-89-25 IX-83-139 IX-89-89 IX-83-95 IX-83-144 IX-89-72 IX-83-144 IX-92-51 IX-95-08 IX-10-36 BC82-748 BC82-838 BC83-002 BC84-396 BC86-103 BC91-003 BC91-293 BC92-035 BC92-265 BC93-392 BC93-753 BC03-1686 BC05-1195 11-2192 14-439 BC85-200 BC91-086 BC93-515 BC94-181 BC83-692 BC91-473 BC97-302 BC86-366 BC89-099 BC83-629 BC90-769 BC83-301 BC84-583 BC90-042 BC84-583 BC92-276 BC94-543 11-896 18 29 35 86 130 251 267 284 292 312 324 459 474 527 529 116 253 312 333 69 279 395 142 197 88 246 61 90 233 90 294 343 514 Location Part QW (Cont'd) QW-462.4(b) QW-462.5 QW-462.5(a) QW-463.1(b) QW-463.2(g) QW-466 QW-466.1 QW-466.3 QW-482 QW-483 QW-484 QW-492 QW-500 QW-510 QW-540 (h) Interpretation File No Page No IX-89-45 IX-10-36 IX-92-05 IX-92-52 IX-98-16 IX-15-12 IX-83-15 IX-83-75 IX-83-51 IX-92-48 IX-92-49 IX-95-15 IX-83-73 IX-83-74 IX-83-115 IX-89-37 IX-07-12 IX-10-10 IX-83-109 IX-86-37 IX-86-14 IX-89-01 IX-86-14 IX-86-70 IX-83-53 IX-07-13 IX-86-16 IX-89-62 IX-92-43 IX-98-15 IX-01-14 IX-01-11 IX-01-11 BC89-368 11-896 BC90-632 BC92-252 BC98-453 14-1107 BC82-388 BC83-149 BC83-881 BC92-267 BC92-268 BC95-094 BC82-866 BC82-867 BC83-279 BC89-358 08-1161 09-2140 BC83-689 BC86-297 BC85-483 BC88-042 BC85-483 BC87-089 BC83-002 08-1464 BC85-533 BC90-253 BC92-100 BC98-448 BC01-332 BC01-089 BC01-089 216 514 263 294 398 533 13 44 34 293 293 346 43 44 77 212 489 502 68 139 123 181 123 157 35 489 124 224 291 397 433 429 429 SECTION IX — CUMULATIVE INDEX — INTERPRETATIONS VOLS 12-63 SUBJECT INDEX Subject Base Metals P-Number reassignment Interpretation File No IX-01-22R 01-679*, 04-600 04-600 09-490 BC82-496 BC83-078 BC83-442 BC85-554 BC85-585 BC89-176 BC90-252 BC90-443 BC95-318 BC95-251 BC95-194 12-2295 BC83-530 BC86-281 BC90-443 BC90-664 BC90-872 BC00-470 BC93-151 13-1559 BC89-358 BC90-768 BC02-2693 12-635 BC00-514 BC01-811 BC04-065 BC04-599 12-635 BC83-340 IX-07-05 IX-10-04 P-Number substitution IX-83-20 IX-83-56 IX-83-96 IX-86-17 IX-86-18 IX-89-29 IX-89-61 IX-89-75 IX-95-21 IX-95-22 IX-95-24 IX-13-13 qualifying for notch IX-83-92 toughness IX-86-48 IX-89-75 IX-89-84 IX-89-96 IX-92-70R IX-92-87 IX-13-23 qualifying for test specimens IX-89-37 IX-89-88 IX-01-30 IX-13-01 thickness IX-01-01 IX-01-19 IX-04-09 IX-04-11 IX-13-01 use of as filler metal IX-83-87 Brazing Base Metals P-Number substitution IX-92-74 Brazing Performance Qualification limits of qualified positions IX-01-34 Brazing Procedure Qualification by Part QW welding qualification IX-92-83 electrode classification IX-95-13 for attaching small penetrations IX-86-73 joint design IX-01-34 qualification by proof test IX-86-53 S-Number substitution IX-92-93 Brazing Procedure Specification combination of thicknesses IX-89-104 qualification of hard-facing IX-92-83 Subject Interpretation Brazing Procedure Specification (Cont'd) recording information on BPS IX-89-93 recording information on the Brazer or Brazing Operator Qualification Test IX-89-94 requalification of IX-86-22 Page No 481 482 495 14 36 62 124 125 204 223 235 353 353 359 522 54 143 235 244 250 425 323 526 212 246 446 515 419 435 464 465 515 56 BC93-474 313 BC02-3541 451 BC93-527 BC94-035 317 345 BC86-332 BC02-3541 BC86-399 BC93-752 159 451 145 325 BC91-097 BC93-527 253 317 File No Page No BC90-783 249 BC90-785 BC85-531 249 126 IX-89-49 IX-92-85 IX-04-06 IX-10-09 BC89-372 BC93-655 BC03-1664 09-883 218 318 459 501 of the WPS IX-83-03 IX-15-10 IX-83-03 BC82-056 14-1236 BC82-056 532 Clad Materials joining of IX-10-18 09-994 505 qualifying viewing windows IX-89-91 IX-83-06 IX-83-22 IX-83-104 BC90-680 BC82-245 BC82-516 BC83-349 247 15 66 Cover Pass remelting of IX-83-89 BC83-402 55 IX-83-55 IX-83-44 IX-89-82 BC83-059 BC82-838 BC90-531 29 36 243 IX-83-09 BC82-279 10 IX-01-13 BC01-570 430 IX-01-26 IX-13-21 BC01-826 13-1044 441 525 Filler Materials (see also SFA Specifications) change in electrode classification IX-83-84 BC83-303 IX-89-61 BC90-252 IX-92-21 BC91-397 IX-98-19 BC99-409 change in product forms IX-07-04 07-1343 53 223 270 409 482 Brazing Test Specimens butt and scarf joints positions tension tests Certification of the PQR Consumable Inserts addition/deletion performance qualification Diameters, Pipe performance qualification ranges listed on the WPS Dust amount in powdered filler metal Edition of Code the use of the referenced edition of the Code Essential Variables (see Variables) (i) SECTION IX — CUMULATIVE INDEX — INTERPRETATIONS VOLS 12-63 Subject InterpretaFile No tion Filler Materials (see also SFA Specifications) (Cont'd) change in wire classification IX-83-84 BC83-398 IX-83-169 BC85-089 IX-95-37 BC96-315 IX-98-19 BC99-409 chemical analysis of weld deposit IX-86-57 BC86-263 electrode spacing IX-86-44 BC86-365 flux-cored consumable IX-89-105 BC91-119 nonferrous IX-83-176 BC85-088 qualifying as a welded buildup IX-83-114 BC84-070 recrushed slag IX-04-19 BC05-26 stranded IX-10-38 12-47 supplementary powder, addition, deletion or increase IX-89-80 BC90-536 without SFA specification IX-86-03 BC85-293 237 114 Flux active/neutral flux-cored arc welding F-Numbers change in classification Interpass Temperatures listing of on the WPS qualification of Machine Welding definition of 53 105 369 409 151 142 254 107 BC85-533 09-1012 124 494 IX-83-10 IX-89-28 IX-89-46 IX-92-99 BC82-299 BC89-174 BC89-369 BC93-762 BC93-769 10 203 216 327 327 BC82-588 16 BC89-176 BC01-338 204 433 IX-83-41 IX-83-161 IX-83-41 IX-83-129 BC82-796 BC84-618 BC82-796 BC84-251 28 101 28 84 IX-92-43 BC92-100 291 Multiprocess Welds qualified thickness range for performance qualification IX-83-14 IX-89-35 qualified thickness range for procedure qualification IX-83-83 IX-95-33 required test specimens for procedure qualification IX-83-01 root pass without backing IX-89-01 with notch-toughness requirements IX-83-33 Interpretation File No Page No Normalized Materials qualified by non-normalized materials IX-83-86 BC83-294 54 Nozzle Joint Design base metal thickness IX-86-31 BC86-101 137 IX-83-25 IX-83-68 IX-83-03 IX-83-151 IX-86-64 IX-07-02 IX-07-10 IX-13-10 BC81-160 BC83-040 BC82-056 BC84-620 BC86-395 06-912 08-1002 13-119 16 41 96 154 481 488 521 BC82-792 26 IX-89-74 IX-98-01 BC90-429 BC97-304 234 383 IX-92-18 IX-92-65 IX-01-31 IX-13-14 IX-13-27 IX-86-84 IX-89-29 IX-92-18 IX-89-101 BC91-389 BC93-148 BC02-2694 13-9 13-634 BC87-491 BC89-176 BC91-389 BC91-085 297 305 446 522 527 174 204 297 252 IX-86-25 IX-86-81 IX-95-32 IX-86-69 IX-92-01 BC86-018 BC87-242 BC95-302 BC87-088 BC90-501 128 173 367 156 285 IX-92-01 IX-92-26 IX-15-11 IX-83-06 IX-83-22 IX-07-07E IX-13-08 IX-10-17 IX-13-30 BC90-501 BC91-470 12-1784 BC82-245 BC82-516 08-40 12-1501 10-1161 14-255 285 273 533 15 497 517 504 528 IV-86-32 IX-86-58 IX-86-66 IX-89-79 IX-89-71 IX-92-72 IX-95-23 IX-95-30 IX-98-14 IX-15-06 IX-15-19 BC86-222 BC86-457 BC87-036 BC90-531 BC90-039 BC93-392 BC95-428 BC96-073 BC98-447 14-934 14-1878 138 152 155 237 233 312 353 361 397 531 536 Operational Control change in company name contractor’s associations of welding procedures 71 472 514 IX-86-16 IX-10-03 classification of martensitic materials IX-83-24 use of electrodes to conform F-No IX-89-29 IX-01-16 Subject Page No organizations not involved in Code applications IX-83-39 Peel Test, Brazing acceptance criteria Performance Qualification alternate base materials for welder qualification A-number substitution applied lining or clad plate by several contractors simultaneously change in angle groove change in vertical welding combination of welding processes consumable inserts BC83-302 BC89-307 12 211 BC83-394 BC96-001 53 367 BC81-702 BC88-042 181 BC82-617 19 continuity Nonessential Variables (see also Variables) addressing IX-98-13 BC98-239 ranges for IX-83-04 BC82-098 corrosion-resistant weld metal overlay 396 (j) SECTION IX — CUMULATIVE INDEX — INTERPRETATIONS VOLS 12-63 Subject Interpretation Performance Qualification (Cont'd) diameter limitation IX-89-09 IX-89-69 IX-89-98 IX-89-104 IX-89-106 IX-92-15 IX-92-41 IX-92-90 IX-95-04 editorial correction to WPQ IX-92-96 effective operational control IX-89-10 of IX-95-20 IX-95-32 electrodes IX-95-30 employer’s responsibility IX-01-15 extension of IX-15-13 fillet welds IX-83-04 IX-83-103 IX-86-28 IX-92-45 IX-10-06 fillet welds qualified by groove welds IX-83-16 IX-83-98 IX-86-74 IX-89-31 IX-89-87 F-Number qualification IX-79-52R IX-80-52R IX-98-08 further training IX-83-13 groove welds IX-83-16 IX-89-20 IX-89-89 IX-89-94 IX-95-04 IX-04-23 IX-13-22 hard facing weld metal overlay IX-92-02 IX-95-23 machine welding IX-95-31 macro examination IX-92-24 maintenance of IX-86-82 IX-13-15 manual/machine welding substitution IX-86-68 IX-89-38 manual/semiautomatic welding substitution IX-95-36 multiprocess IX-83-14 IX-83-107 IX-86-13 IX-86-23 IX-86-39 operator variables IX-83-163 IX-86-05 partial-penetration groove welds IX-83-155 File No Page No BC88-397 BC90-401 BC91-003 BC91-097 BC91-120 BC91-263 BC92-035 BC93-753 BC94-296 BC93-755 BC88-398 BC95-302 BC95-302 BC96-073 BC01-641 14-1451 BC82-098 BC83-237 BC86-062 BC92-238 08-210 185 227 251 253 254 267 284 324 335 326 186 352 367 361 433 534 65 130 292 496 BC82-396 BC84-450 BC87-134 BC89-178 BC90-745 BC79-046* BC80-435* BC98-131 BC82-346 BC82-396 BC88-478 BC90-769 BC90-785 BC94-296 BC05-784 13-1154 13 63 165 204 245 49 49 390 12 13 194 246 249 335 474 526 BC90-518 BC95-428 BC96-141 BC91-280 BC87-252 13-131 262 353 361 272 173 523 BC87-039 BC89-359 156 213 BC96-314 BC82-302 BC83-550 BC85-507 BC85-553 BC86-299 BC85-022 BC85-306 369 12 67 118 127 140 102 114 BC84-692 98 Subject Interpretation Performance Qualification (Cont'd) P-Number substitutions IX-83-40 IX-83-42 IX-83-63 IX-83-70 IX-83-116 IX-83-137 IX-86-17 IX-86-18 IX-86-41 IX-86-51 IX-86-72 IX-89-15 IX-89-33 position IX-83-28 IX-83-108 IX-83-162 IX-83-170 IX-83-177 IX-86-29 IX-86-30 IX-86-35 IX-89-24 IX-89-40 IX-89-98 IX-92-15 IX-92-41 IX-92-46 IX-92-90 IX-04-24 IX-15-01 process substitution IX-86-46 production assembly IX-10-05 IX-10-12 mock-up qualification with and without backing IX-92-96 IX-01-09 questioning of ability IX-86-24 recording information on WPQ IX-86-13 IX-86-72 IX-89-30 IX-89-47 IX-13-25 records IX-95-38 IX-01-36 IX-13-20 renewal of IX-83-154 IX-83-159 IX-83-164 IX-83-166 IX-83-167 IX-86-07 IX-86-19 IX-86-50 IX-86-52 IX-89-32 IX-92-12 IX-92-22 IX-92-47 IX-92-64 IX-01-21 IX-04-13 (k) File No Page No BC82-794 BC82-803 BC83-122 BC83-270 BC84-054 BC84-399 BC85-554 BC85-585 BC86-330 BC86-390 BC87-091 BC88-404 BC89-175 BC82-748 BC83-639 BC84-663 BC85-091 BC85-092 BC86-103 BC86-104 BC86-266 BC89-097 BC89-362 BC91-003 BC91-263 BC92-035 BC92-265 BC93-753 BC05-1195 14-439 BC86-219 09-1596 10-13 27 28 40 42 77 87 124 125 141 145 158 188 205 18 68 102 105 108 130 131 139 196 214 251 267 284 292 324 474 529 143 495 502 BC94-102 BC01-032 BC86-001 326 428 128 BC85-507 BC87-091 BC89-177 BC89-370 14-371 BC96-132 BC02-4198 13-939 BC84-689 BC84-690 BC85-023 BC85-030 BC85-031 BC85-560 BC85-587 BC86-389 BC86-394 BC89-100 BC91-264 BC91-425 BC92-266 BC92-464 BC01-035 BC04-1457 118 158 204 217 527 375 452 525 97 99 103 104 104 115 125 144 145 203 266 271 292 305 439 466 SECTION IX — CUMULATIVE INDEX — INTERPRETATIONS VOLS 12-63 Subject Interpretation Performance Qualification (Cont'd) requalification after failure IX-92-56 requalification after failure and further training IX-92-73 requalification for friction weld operator IX-92-58 requalifying for Addenda changes IX-83-112 responsibility of IX-83-21 IX-83-100 IX-83-101 IX-83-106 IX-83-113 IX-83-117 IX-83-121 IX-83-124 IX-83-128 IX-83-131 IX-83-132 IX-83-133 IX-83-134 IX-92-25 IX-98-14 IX-10-02 revoking of qualification IX-95-19 IX-04-21 simultaneous qualification of welders IX-92-39 IX-95-14 IX-10-29 special positions IX-13-26 special process IX-89-92 strip electrodes test coupon qualification test specimen movement thickness limitation type of tests required ultrasonic examination unassigned base metals units of measurement IX-95-30 IX-15-14 IX-92-31 IX-86-77 IX-83-90 IX-83-158 IX-89-02 IX-89-24 IX-89-32 IX-89-64 IX-89-83 IX-89-95 IX-89-96 IX-92-36 IX-92-35 IX-92-32 IX-92-51 IX-92-59 IX-95-23 IX-95-28 IX-98-05 IX-98-17 IX-10-35 IX-92-17 IX-92-23 IX-95-35 IX-13-29 IX-04-27 File No Page No BC92-308 295 BC93-468 313 BC92-357 296 BC84-038 BC82-499 BC83-563 BC83-529 BC83-630 BC83-055 BC84-133 BC84-134 BC84-149 BC84-226 BC84-365 BC84-366 BC84-370 BC84-396 BC91-415 BC98-447 09-747 BC95-221 BC05-528 70 15 63 64 67 71 78 80 81 83 85 85 86 86 272 397 493 352 473 BC92-121 BC95-040 10-339 11-2192 BC90-681, BC90-691 BC96-073 14-1618 BC91-613 BC87-138 BC83-407 BC84-368 BC88-090 BC89-097 BC89-287 BC90-297 BC90-532 BC90-869 BC90-872 BC91-616 BC91-277 BC91-631 BC92-276 BC92-206 BC95-428 BC96-002 BC98-009 BC98-055 11-2030 BC91-315 BC90-494 BC96-287 13-598 BC05-1215 283 345 511 527 Subject 248 361 534 280 166 55 99 181 196 205 225 243 250 250 282 281 280 294 303 353 360 389 403 513 268 270 368 528 477 Interpretation Performance Qualification (Cont'd) using radiography IX-83-19 IX-83-52 IX-83-57 IX-83-91 IX-83-142 IX-83-173 IX-83-174 IX-86-34 IX-86-79 IX-86-85 IX-89-21 visual examination IX-92-71 IX-95-17 IX-01-03 visual inspection IX-89-50 IX-15-04 volumetric examination IX-10-26 welder/operator IX-89-48 IX-89-51 IX-89-57 IX-89-63 IX-89-108 IX-95-39 IX-98-11 IX-98-14 IX-07-11 welder/operator identification IX-83-138 welding of joint by more than IX-15-08 one welder IX-89-06 when welding PQR coupon IX-83-31 IX-86-90 IX-89-48 IX-10-01 with a tube end gun IX-83-67 with/without backing IX-83-168 IX-86-23 File No Page No BC82-440 BC83-001 BC83-079 BC83-528 BC84-548 BC85-013 BC84-557 BC86-265 BC87-140 BC87-492 BC89-031 BC93-365 BC95-035 BC00-519 BC90-035 14-558 09-744 BC89-360 BC90-038 BC90-040 BC90-254 BC91-157 BC96-331 BC98-133 BC98-447 08-1607 14 34 36 56 89 106 107 138 167 174 195 312 351 420 218 530 510 217 219 221 224 256 375 395 397 489 NI84-058 14-1080 BC88-169 BC82-395 BC88-091 BC89-360 09-567 BC83-123 BC85-059 BC85-553 88 531 183 19 176 217 493 41 104 127 Plasma Arc Welding IX-89-40 BC89-362 214 IX-07-14 IX-10-30 IX-13-31 09-486 10-1189 14-510 493 511 529 BC88-041 BC84-697 BC91-257 BC94-365 176 98 265 336 BC88-168 183 Positions, Brazing qualification of flow positions IX-86-02 BC85-292 113 Positions, Welding fillet welds in vertical-up progression listing on the WPS qualification of 1G position qualification of 2G position qualification of 6G position BC83-303 BC82-830 14-973 BC83-149 BC03-1686 52 29 531 44 459 P-Numbers assignments chemical analysis/mechanical properties of IX-86-88 classification of IX-83-156 IX-92-08 IX-95-05 welding of non-pressure retaining attachments IX-89-05 (l) IX-83-82 IX-83-44 IX-15-07 IX-83-75 IX-04-07 SECTION IX — CUMULATIVE INDEX — INTERPRETATIONS VOLS 12-63 Subject Positions, Welding (Cont'd) recording welder qualification for stud welding vertical-down progression vertical-up progression Postweld Heat Treatment addition of change in base metal thickness change in soaking time holding time limit on maximum time P8 material reporting results Interpretation File No Page No IX-83-53 IX-04-28 IX-10-20 IX-83-50 IX-86-86 BC83-002 BC06-323 10-1489 BC82-872 BC87-494 35 478 506 33 175 IX-86-47 IX-07-01 BC86-223 06-285 143 481 IX-92-33 IX-04-15 IX-83-130 IX-15-22 IX-83-145 IX-04-03 IX-13-07 IX-98-10 BC91-614 BC04-1595 BC84-252 14-2010 BC84-584 BC03-1212 12-1230 BC97-306, BC97-308 BC82-097* BC82-243 BC06-462 BC82-300 BC85-553 BC87-137 BC01-813 07-1708 BC82-763 BC86-010 280 467 84 537 90 458 517 BC82-599 25 BC83-303 BC84-618 52 101 temperature ranges IX-81-30R IX-83-30 IX-04-29 transformation temperatures IX-83-11 IX-86-23 IX-86-76 IX-01-20 IX-07-06 versus post heating IX-83-29 IX-86-20 when lower critical temperature has been exceeded IX-83-35 Preheat Temperature maintenance of Procedure Qualification acceptance criteria dissimilar base materials equipment essential variables hardness testing impact testing IX-83-82 IX-83-161 IX-01-18 IX-15-15 IX-95-42 IX-89-54 IX-89-59 IX-01-06 IX-15-12 IX-89-23 IX-15-03 IX-98-06 joints limits of qualified positions for procedures IX-95-13 liquid penetrant examination IX-92-13 IX-95-23 nonessential variables IX-98-13 IX-01-05 partial penetration groove welds IX-89-62 IX-95-03 root pass IX-01-32 seal welds IX-98-15 solution annealing IX-10-08 subcontracting IX-92-78 Subject Interpretation Procedure Qualification (Cont'd) substrate deposit IX-95-34 tension tests IX-95-09 thickness limits IX-01-35 tube-to-tubesheet testing IX-15-23 variables IX-89-79 IX-92-40 weld repair and buildup tests IX-95-03 welds with buttering IX-01-33 Procedure Qualification Record additions/corrections to IX-83-171 IX-07-08 applied lining IX-92-20 certification of IX-83-03 IX-07-13 combining PQRs IX-83-47 IX-86-15 IX-89-40 IX-92-42 IX-92-59 IX-92-68 IX-92-95 IX-04-18 IX-10-34 corrosion-resistant weld metal overlay, chemical analysis IX-89-77 IX-89-71 IX-92-05 IX-92-06 IX-92-28 IX-92-52 IX-92-54 IX-95-41 IX-98-16 IX-10-11 dissimilar base metal thicknesses IX-92-11 IX-95-12 IX-98-20R IX-01-23 IX-04-11 IX-04-16 IX-13-16 electrical characteristics IX-92-88 IX-01-28 IX-04-12 IX-04-14 filler metals additions/deletions of IX-13-24 395 18 478 11 127 166 435 483 18 125 BC01-772 14-1656 BC97-044 BC89-367 BC90-250 BC98-240 14-1107 BC89-096 14-537 BC98-009 435 534 377 220 222 421 533 196 530 389 BC94-035 BC91-278 BC95-428 BC98-239 BC00-654 345 267 353 396 420 BC90-253 BC94-235 BC02-3449 BC98-448 09-513 BC93-561 224 334 447 397 501 315 groove and fillet welds hardfacing overlay, examination (m) IX-92-11 IX-92-37 IX-92-34 IX-95-28 IX-89-77 IX-92-03 IX-92-04 IX-95-23 IX-95-34 IX-98-16 File No Page No BC96-060 BC94-570 BC02-4075 14-2048 BC90-531 BC92-110 BC94-235 BC02-3896 368 344 451 537 237 284 334 447 BC85-132 08-209 BC91-396 BC82-056 08-1464 BC82-790 BC85-532 BC89-362 BC92-011 BC92-206 BC92-011A BC94-008 BC05-25 10-1966 105 488 270 489 32 123 214 291 303 306 326 472 513 BC90-492 BC90-039 BC90-632 BC91-054 BC91-472 BC92-252 BC92-305 BC97-028 BC98-453 09-2141 233 236 263 264 273 294 295 376 398 502 BC91-263 BC95-027 BC99-539* BC01-789 BC04-599 BC04-1418 13-635 BC93-593 BC02-2691 BC04-1013 BC04-1592 266 345 426 440 465 471 523 325 445 466 466 14-370 526 BC91-263 BC92-097 BC91-586 BC96-002 BC90-492 BC90-523 BC90-530 BC95-428 BC96-060 BC98-453 266 282 281 360 236 262 263 353 368 398 SECTION IX — CUMULATIVE INDEX — INTERPRETATIONS VOLS 12-63 Subject Interpretation Procedure Qualification Record (Cont'd) information on IX-86-70 IX-89-16 listing of backing IX-86-33 listing of preheat IX-83-165 temperature listing of shielding gas purity IX-95-11 macro examination IX-92-24 manufacturer’s or contractor’s responsibility IX-89-73 IX-92-07 IX-92-09 IX-92-16 IX-92-25 IX-92-66 IX-92-67 IX-92-80 IX-92-81 IX-92-92 IX-95-25 IX-95-26 IX-95-27 IX-95-29 IX-95-40 File No Page No BC87-089 BC88-405 BC82-262 BC85-024 157 188 138 103 BC95-002 BC91-280 344 272 BC90-319 BC91-156 BC91-260 BC91-314 BC91-415 BC93-377 BC93-391 BC92-584 BC92-306 BC93-678 BC95-252 BC95-303 BC95-482 BC95-302 BC93-431, BC95-222 BC99-025 BC05-1196 06-912 234 264 265 268 272 305 306 316 316 325 359 359 360 360 63 95 318 165 166 293 458 390 440 12 88 106 107 535 221 221 304 327 296 IX-92-44 IX-10-16 IX-92-84 IX-95-21 IX-95-22 IX-98-04 IX-01-17 IX-04-10 IX-10-39 BC83-472 BC84-417 BC93-658 BC87-136 BC87-139 BC92-217 BC03-1246 BC98-009 BC01-679 BC82-182 BC83-629 BC85-135 BC85-038 14-1772 BC90-036 BC90-249 BC92-425 BC94-167 BC92-354 BC90-681, BC90-691 BC92-168 10-1159 BC93-586 BC95-318 BC95-251 BC97-481 BC01-615 BC04-601 12-178 IX-92-19 IX-92-53 IX-92-89 BC91-390 BC92-254 BC93-653 269 294 324 IX-98-18 IX-04-26 IX-07-02 meeting requirements of older editions notch toughness testing oscillation P-Number reassignment recording test results requalifying revising WPSs special process Supplemental Filler Metal supporting WPSs thickness limits and test specimens IX-83-99 IX-83-148 IX-92-86 IX-86-75 IX-86-78 IX-92-50 IX-04-04 IX-98-07 IX-01-22 IX-83-26 IX-83-139 IX-83-172 IX-83-175 IX-15-16 IX-89-56 IX-89-58 IX-92-62 IX-92-97 IX-92-57 IX-89-92 Subject Interpretation Procedure Qualification Record (Cont'd) IX-95-23 IX-98-03 IX-98-05 IX-98-07 IX-98-17 IX-01-01 IX-04-11 types of test required IX-92-17 visual examination IX-01-10 IX-15-17 File No Page No BC95-428 BC97-479 BC98-009 BC98-009 BC98-055 BC00-514 BC04-599 BC91-315 BC01-073 14-1777 353 383 389 390 403 419 465 268 428 535 Process definition of performance qualification variables for IX-83-58 IX-83-69 IX-86-12 BC83-086 BC83-233 BC85-482 37 42 117 Production Welds liquid penetrant examination IX-92-13 BC91-278 267 BC82-530 BC86-104 15 131 BC84-092 BC89-358 BC01-789 BC90-632 BC98-009 BC83-058 BC86-103 BC83-529 BC86-061 80 212 440 263 389 41 130 64 129 BC82-246 BC84-581 BC83-396 BC82-300 BC04-1301 BC82-871 BC86-058 BC82-870 BC98-453 89 54 11 473 33 126 32 398 BC88-089 BC83-407 176 55 BC90-663* BC97-479 BC90-632 BC98-009 BC98-453 BC83-394 BC84-221 BC90-734 14-1909 BC83-531 BC84-221 BC84-434 BC86-062 BC83-395 08-576 261 383 263 389 398 53 82 245 536 56 82 89 130 51 488 Qualified Thickness Range performance for different positions IX-83-23 IX-86-30 for dissimilar base metal thicknesses IX-83-123 IX-89-37 IX-01-23 for hardfacing overlay IX-92-05 IX-98-05 for pipe IX-83-66 IX-86-29 for weld overlays IX-83-101 IX-86-27 weld reinforcement procedure IX-83-07 IX-83-143 changes in later editions IX-83-88 effect of PWHT IX-83-11 IX-04-22 for brazed laps IX-83-49 IX-86-21 for cladding IX-83-48 IX-98-16 for dissimilar base metal thickness IX-86-89 for double-bevel groove IX-83-90 welds for groove welds IX-89-100R IX-98-03 for hardfacing overlay IX-92-05 IX-98-05 IX-98-16 for multiprocess procedures IX-83-83 IX-83-126 for notch toughness IX-89-86 for tube-to-tubesheet IX-15-20 for weld repair IX-83-93 IX-83-126 IX-83-141 IX-86-28 impact testing IX-83-81 IX-07-09 376 403 477 481 248 291 504 318 353 353 384 434 464 514 (n) SECTION IX — CUMULATIVE INDEX — INTERPRETATIONS VOLS 12-63 Subject Interpretation Qualified Thickness Range (Cont'd) limitation when using GMAW-S IX-83-18 IX-95-33 IX-95-28 limitations for combined procedures IX-83-80 IX-95-33 limitations of QW-451 IX-83-102 IX-83-152 IX-86-36 IX-89-83 minimum for weld metal IX-83-81 IX-89-39 ranges qualified by PQR IX-83-36 IX-83-64 IX-89-11 IX-01-12 thickness for determining weld reinforcement IX-83-05 IX-83-08 thickness used to determine range IX-83-94 IX-86-43 IX-89-18 IX-01-27 IX-04-09 File No Subject Page No SFA Specifications (Cont'd) use of different electrode brands Interpretation File No Page No IX-86-65 IX-01-38 IX-92-61 BC87-031A BC03-274 BC92-422 155 452 304 BC82-423 BC96-001 BC96-002 14 367 360 BC83-388 BC96-001 BC83-551 BC84-648 BC86-280 BC90-532 BC83-395 BC89-361 BC82-757 BC83-222 BC88-399 BC01-201 50 367 65 96 139 243 51 213 25 40 186 430 Shielding Gases procedure qualification using IX-83-02 IX-92-62 purity IX-95-11 IX-15-21 BC81-704 BC92-425 BC95-002 14-1943 304 344 536 SI Units use of IX-83-85 BC83-003 53 IX-92-98 IX-95-07 BC94-236 BC94-522 327 343 BC82-237 BC82-265 10 Standard Welding Procedure Specifications (SWPSs) use of IX-01-11 BC01-089 IX-01-14 BC01-332 429 433 BC83-284 BC86-337 BC88-474 BC02-111 BC04-065 61 142 193 441 464 Records (see also Procedure Qualification Record) maintenance of performance qualification IX-83-32 BC82-598 IX-92-55 BC92-307 IX-01-08 BC01-030 IX-13-06 12-7 Supplementary Essential Variables (see also Variables) qualifying changes in IX-83-79 BC83-358 IX-83-122 BC83-645 IX-83-135 BC84-397 use of IX-01-39 BC03-469 IX-10-21 10-496 50 80 87 453 509 19 295 427 516 Root Gap qualification of use of term 43 SFA Specifications AWS classification change change in SFA specification filler metal classification change of designations in a classification change of electrode classification chemistry deviation classification listed in AWS specification electrode characteristics electrode classification electrode spacing heat treatment conditions marking of packages mechanical tests use of IX-83-71 IX-83-04 BC83-230 BC82-098 IX-83-147 BC84-249 95 IX-01-37 IX-13-19 BC03-263 13-727 452 525 IX-83-59 BC82-614 37 IX-83-61 IX-89-13 IX-92-21 IX-89-08 BC82-831 BC88-402 BC91-397 BC88-172 39 187 270 185 IX-92-94 IX-04-17 IX-89-76 IX-95-13 IX-86-63 IX-83-46 IX-01-29 IX-89-97 IX-83-27 IX-01-25 IX-01-38 BC93-754 BC05-24 BC90-466 BC94-035 BC86-520 BC82-751 BC02-2692 BC90-873 BC82-713 BC01-815 BC03-274 326 471 235 345 154 31 445 251 17 441 452 use of powdered filler metal S-Numbers qualification Test Specimens acceptance criteria for bend specimens IX-83-60 IX-83-115 IX-86-61 IX-89-52 IX-95-15 IX-13-32 acceptance criteria for fracture test IX-10-32 acceptance criteria for section test IX-83-76 IX-83-120 bending of IX-83-51 IX-10-10 IX-13-28 brazing joint clearance IX-86-11 calibration of testing machines IX-83-109 cold straightening of IX-83-60 corrosion-resistant overlay IX-92-05 IX-92-60 determining coupon IX-83-77 thickness IX-83-78 IX-83-143 dimensions recorded on PQR IX-83-26 IX-83-144 face and root bends, transverse IX-89-72 IX-04-05 failure of IX-83-153 IX-86-09 (o) BC82-749 BC83-279 BC86-515 BC90-044 BC95-094 14-557 38 77 153 219 346 529 11-939 512 BC83-248 BC83-474 BC82-881 09-2140 14-438 BC85-420 44 79 34 502 528 117 BC83-689 BC82-749 BC90-632 BC92-421 BC83-253 BC83-300 BC84-581 BC82-182 BC84-583 68 38 263 303 49 50 89 17 90 BC90-042 BC03-1583 BC84-664 BC85-200 233 458 97 116 SECTION IX — CUMULATIVE INDEX — INTERPRETATIONS VOLS 12-63 Subject Test Specimens (Cont'd) fillet welds for impact testing for multiprocess welds for multiprocess welds for peel or section tests grinding of overlay specimens guided-bend tests longitudinal bend mandrel size method of restraint minimum weld metal deposit thickness nondestructive testing of number of tension test specimens partial penetration product form qualification of quarter section reduced section removal roll planishing size of specimen required Interpretation File No Page No IX-95-08 IX-10-27 IX-10-36 BC94-543 08-210 11-896 343 510 514 IX-01-24 IX-83-43 IX-83-76 IX-83-60 IX-92-10 IX-95-15 IX-98-12 440 29 44 38 265 346 IX-89-107 IX-83-74 IX-86-71 IX-86-37 IX-86-38 BC01-814 BC82-822 BC83-248 BC82-749 BC91-261 BC95-094 BC98-237, BC98-238 BC91-124 BC82-867 BC87-090 BC86-297 BC86-298 IX-92-68 IX-86-83 IX-92-37 IX-15-09 IX-89-99 IX-86-40 IX-89-07 IX-89-45 IX-92-29 IX-13-04 IX-83-65 IX-89-25 IX-89-90 IX-92-76 IX-92-79 IX-01-21 IX-83-15 IX-83-119 IX-92-79 IX-86-26 IX-83-38 IX-83-73 IX-86-45 BC92-011 BC87-489A BC92-097 14-1087 BC91-022 BC86-329 BC88-171 BC89-368 BC91-473 12-120 BC83-225 BC89-099 BC90-532 BC93-515 BC93-583 BC01-035 BC82-388 BC84-253 BC93-583 BC86-059 BC82-771 BC82-866 BC86-366 306 174 282 532 251 141 184 216 279 516 40 197 247 314 315 439 13 79 315 129 26 43 142 BC91-096 253 BC90-537 BC02-3586 BC05-1404 08-1161 BC91-279 BC92-452 BC94-542 BC94-570 BC97-302 237 457 474 489 267 304 336 344 395 BC92-267 BC92-268 BC94-181 BC91-124 12-752 12-1563 14-497 11-2029 293 293 333 255 515 516 530 514 Subject Test Specimens (Cont'd) using radiography visual requirements tension, full section for small diameter pipe IX-89-103 tension, reduced section for lap and rabbet joints, plate IX-89-81 tension test IX-04-01 IX-04-25 IX-07-12 tension test results IX-92-14 IX-92-63 IX-95-06 IX-95-09 IX-98-09 test jig dimensions for bend tests IX-92-48 IX-92-49 tolerances IX-95-02 transverse bend IX-89-107 tube-to-tubesheet IX-13-02 IX-13-05 IX-15-02 turned tensile specimen IX-10-37 Interpretation File No Page No IX-83-157 IX-86-62 IX-01-04 IX-83-149 IX-01-04 BC84-700 BC86-517 BC00-653 BC84-558 BC00-653 98 153 420 95 420 BC84-250* BC89-369 BC89-371 11-918 11-1339 137 216 220 512 512 BC90-289 BC82-514 NI83-004 BC83-279 BC84-365 BC82-385 BC84-398 BC95-318 BC95-251 BC82-751 BC81-160 BC87-137 225 25 39 77 85 30 87 353 353 31 16 166 BC83-042 BC90-430 BC87-253 BC82-056 BC85-483 BC90-531 BC90-671 09-588 13-274 35 227 167 126 243 244 496 521 BC82-794 BC82-182 09-558 27 17 511 Unlisted Materials (Non-Code Material) A-Number classification IX-83-140R IX-89-46 IX-89-55 IX-10-31 IX-10-33 identifying welding electrodes in cartons IX-89-65 P-Numbers for IX-83-34 IX-83-62 IX-83-115 IX-83-131 qualification of IX-83-45 IX-83-136 IX-95-21 IX-95-22 SAW flux/wire combinations IX-83-46 use of filler metals IX-83-25 IX-86-76 396 255 44 157 139 140 Variables changes to the WPS IX-83-54 IX-89-70 flexible welding back-up tape IX-86-80 listing on the WPS IX-83-03 IX-86-14 IX-89-82 IX-89-85 IX-10-07 IX-13-11 ranges demonstrated on the PQR IX-83-40 recording on the PQR IX-83-26 IX-10-28 Welder Qualification (see Performance Qualification) Welding Operator Qualification (see Performance Qualification) Welding Procedure Specification base metal thickness IX-04-09 IX-13-09 certification IX-83-03 IX-89-43 changes in IX-83-37 IX-83-118 IX-83-125 IX-83-150 IX-86-67 IX-92-30 IX-10-13 (p) BC04-65 12-1833 BC82-056 BC89-365 BC82-770 BC84-183 BC84-151 BC84-617 BC87-038 BC91-587 09-1368 464 517 215 26 78 81 96 155 279 503 SECTION IX — CUMULATIVE INDEX — INTERPRETATIONS VOLS 12-63 Subject Interpretation Welding Procedure Specification (Cont'd) combination of processes IX-83-164 IX-86-01 IX-86-06 IX-86-23 IX-86-56 IX-86-60 IX-86-87 IX-89-26 IX-89-67 IX-95-10 IX-04-08 IX-10-24 IX-15-05 combining of IX-86-08 IX-92-75 IX-92-77 contents of IX-13-03 electrical characteristics IX-95-18 IX-07-03 for corrosion-resistant weld metal overlay IX-86-59 IX-89-12 IX-95-41 IX-10-19 for weld repair / buildup IX-83-160 IX-10-15 information recorded on IX-83-127 IX-86-04 IX-86-10 IX-86-14 IX-86-54 IX-89-03 IX-89-16 IX-89-19 IX-95-11 manufacturer’s and contractor’s responsibility IX-89-73 IX-92-07 IX-92-80 IX-92-81 IX-95-25 IX-95-26 IX-95-27 IX-95-29 IX-95-40 IX-01-02 IX-98-02 File No Page No BC85-023 BC85-036 BC85-328 BC85-553 BC86-429 BC86-514A BC87-490A BC89-103 BC90-335 BC94-662 BC03-1770 11-216 14-786 BC85-134 BC93-490 BC93-518 11-1476 BC95-220 07-1041 103 113 115 127 146 152 175 197 226 344 464 510 530 116 313 314 515 351 481 BC86-458 BC88-401 BC97-028 09-2143 BC84-219 10-359 BC84-224 BC85-304 BC85-307 BC85-483 BC86-400 BC88-166A BC88-405 BC88-476 BC95-002 152 187 376 506 100 503 83 114 117 123 146 182 188 194 344 BC90-319 BC91-156 BC93-584 BC92-306 BC95-252 BC95-303 BC95-482 BC95-302 BC93-431, BC95-222 BC00-553 BC97-309 234 264 316 316 359 359 360 360 Subject Interpretation Welding Procedure Specification (Cont'd) IX-01-40 IX-07-02 IX-10-25 IX-13-20 meeting requirements of older editions IX-92-86 multiple layers IX-04-02 IX-13-12 P-Number IX-89-36 IX-89-58 P-Number reassignment IX-07-05 preliminary IX-10-22 qualification IX-89-04 IX-89-35 IX-89-66 IX-95-01 requalification of IX-89-14 IX-89-42 IX-89-17 IX-89-41 IX-89-54 IX-92-38 IX-95-04 IX-95-16 IX-04-20 IX-07-05 short circuiting mode IX-95-28 IX-95-33 supplemental filler metal IX-10-16 supplied to welder IX-83-17 support of IX-83-146 IX-86-42 IX-86-55 IX-89-26 IX-89-68 transfer mode IX-07-03 units of measurement IX-04-27 upset welding IX-15-18 use for an unassigned material IX-89-41 IX-01-07 IX-10-14 use of at job sites IX-83-12 use of by subcontractor IX-86-49 weld joint IX-89-53 IX-95-01 376 419 383 (q) File No Page No BC03-740 06-912 11-44 13-939 453 481 510 525 BC93-158 BC03-1029 12–1529 BC89-357 BC90-249 04-600 10-1158 BC88-167 BC89-307 BC90-281 BC94-104 BC88-403 BC89-364 BC88-473 BC89-363 BC89-367 BC91-630 BC94-296 BC95-095 BC05-293 04-600 BC96-002 BC96-001 10-1159 BC82-422 BC84-619 BC86-331 BC86-426 BC89-103 BC90-349 07-1041 BC05-1215 14-1851 318 457 522 212 221 482 509 182 211 226 333 187 215 193 214 220 283 335 346 472 482 360 367 504 13 90 141 146 197 227 481 477 535 BC89-363 BC01-029 09-2144 BC82-341 BC86-367 BC90-045 BC94-104 214 427 503 11 144 219 333 ASME CODES AND STANDARDS TRAINING To assist in a better understanding of the practical applications of ASME Codes and Standards and their impact on safety, quality, and integrity, ASME Training & Development provides more than 200 different courses, ranging from fundamental to advanced, that focus on various ASME Codes and Standards Developed and taught by ASME-approved instructors who are recognized experts within their respective professional disciplines, training programs are offered in multiple learning formats, including face-to-face “live” courses and eLearning courses, as well as In-Company Training held onsite at an organization’s location For more information and to explore the wide range of ASME Codes and Standards training programs, you can reach us in the following ways: Website: go.asme.org/standardstraining Email: training-info@asme.org Phone: ASME Customer Care at +1 973 882 1170 2015 ASME Boiler and Pressure Vessel Code AN INTERNATIONAL CODE The ASME Boiler and Pressure Vessel Code (BPVC) is “An International Historic Mechanical Engineering Landmark,” widely recognized as a model for codes and standards worldwide Its development process remains open and transparent throughout, yielding “living documents” that have improved public safety and facilitated trade across global markets and jurisdictions for a century ASME also provides BPVC users with integrated suites of related offerings: • referenced standards • related standards and guidelines • conformity assessment programs • training and development courses • ASME Press books and journals • conferences and proceedings You gain unrivaled insight direct from the BPVC source, along with the professional quality and real-world solutions you have come to expect from ASME For additional information and to order: Phone: 1.800.THE.ASME (1.800.843.2763) Email: customercare@asme.org Website: go.asme.org/bpvc15 200090