BS EN 3660-064:2016 BSI Standards Publication Aerospace series — Cable outlet accessories for circular and rectangular electrical and optical connectors Part 064: Cable outlet, style K, straight, for heat shrinkable boot, shielded, sealed, selflocking for EN 2997 — Product standard BS EN 3660-064:2016 BRITISH STANDARD National foreword This British Standard is the UK implementation of EN 3660-064:2016 It supersedes BS EN 3660-064:2009 which is withdrawn The UK participation in its preparation was entrusted to Technical Committee ACE/6, Aerospace avionic electrical and fibre optic technology A list of organizations represented on this committee can be obtained on request to its secretary This publication does not purport to include all the necessary provisions of a contract Users are responsible for its correct application © The British Standards Institution 2016 Published by BSI Standards Limited 2016 ISBN 978 580 89595 ICS 49.060 Compliance with a British Standard cannot confer immunity from legal obligations This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 January 2016 Amendments/corrigenda issued since publication Date Text affected BS EN 3660-064:2016 EN 3660-064 EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM January 2016 ICS 49.060 Supersedes EN 3660-064:2009 English Version Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 064: Cable outlet, style K, straight, for heat shrinkable boot, shielded, sealed, self-locking for EN 2997 - Product standard Série aérospatiale - Accessoires arrière pour connecteurs circulaires et rectangulaires électriques et optiques - Partie 064 : Raccord, type K, droit, blindé, étanche, pour manchon thermorétractable, auto-freiné pour EN 2997 - Norme de produit Luft- und Raumfahrt - Endgehäuse für elektrische und optische Rund- und Rechtecksteckverbinder - Teil 064: Endgehäuse, Bauform K, gerade, für wärmeschrumpfende Bauteile, Schirmanschluß, abgedichtet, selbstsichernd für EN 2997 Produktnorm This European Standard was approved by CEN on June 2015 CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member This European Standard exists in three official versions (English, French, German) A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom EUROPEAN COMMITTEE FOR STANDARDIZATION COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels © 2016 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members Ref No EN 3660-064:2016 E BS EN 3660-064:2016 EN 3660-064:2016 Contents Page European foreword Scope Normative references Terms and definitions Characteristics 5 Tests 13 Designation 20 Marking 20 Technical specification 20 BS EN 3660-064:2016 EN 3660-064:2016 European foreword This document (EN 3660-064:2016) has been prepared by the Aerospace and Defence Industries Association of Europe - Standardization (ASD-STAN) After enquiries and votes carried out in accordance with the rules of this Association, this European Standard has received the approval of the National Associations and the Official Services of the member countries of ASD, prior to its presentation to CEN This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by July 2016, and conflicting national standards shall be withdrawn at the latest by July 2016 Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights This document supersedes EN 3660-064:2009 According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom BS EN 3660-064:2016 EN 3660-064:2016 Scope This European Standard defines a range of cable outlets, style K, straight, shielded, sealed, self-locking (anti-rotational) for heat shrinkable boot, and / or metallic band under the following conditions: The mating connectors are listed in EN 3660-002 NOTE Class N in EN 3660-001 cross refers to class F in EN 3660-064 Temperature range, Class F (N) Class K Class KE Class W Class T Class Z Associated electrical accessories : : : : − 65 °C to 200 °C (See note above); − 65 °C to 200 °C; − 65 °C to 260 °C; − 65 °C to 175 °C; : − 65 °C to 175 °C (Nickel PTFE plating); : EN 3660-033 Metallic band (for shield termination) : − 65 °C to 175 °C (Zinc Nickel plating) These cable outlets are designed for termination of overall shielding braid and / or individual cable shields They accommodate/permit the termination of heat shrinkable boots Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application For dated references, only the edition cited applies For undated references, the latest edition of the referenced document (including any amendments) applies EN 2591- 1), Aerospace series — Elements of electrical and optical connection — Test methods EN 2997 (series), Aerospace series — Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures − 65 °C to 175 °C continuous, 200 °C continuous, 260 °C peak EN 3660-001, Aerospace series — Cable outlet accessories for circular and rectangular electrical and optical connectors — Part 001: Technical specification EN 3660-002, Aerospace series — Cable outlet accessories for circular and rectangular electrical and optical connectors — Part 002: Index of product standards EN 3660-033, Aerospace series — Cable outlet accessories for circular and rectangular electrical and optical connectors — Part 033: Stainless steel banding band, style Z, for attachment of individual and/or overall screens to cable outlets — Product standard 2) AS85049A, Connector accessories, electrical general specification for- 3) IEC 60529, Degrees of protection provided by enclosures (IP Code) DIN 82, Knurling 1) All its parts quoted in this European Standard 2) In preparation at the date of publication of this European Standard 3) Published by: SAE National (US) Society of Automotive Engineers http://www.sae.org/ BS EN 3660-064:2016 EN 3660-064:2016 Terms and definitions For the purposes of this document, the terms and definitions given in EN 3660-001 apply (Self-locking / anti rotational definition) A self-locking or anti rotational mechanism provides a nut rotation with moderate torque in the mated direction and provides a greater torque in the unmated direction Characteristics 4.1 Dimensions and mass For dimensions and mass, see Figure and Table to Table For cable entry dimensions, see 4.2 All dimensions are in millimetres Key Thread C Marking Number of teeth N Four tooling holes spaced 90° apart Ø 2,60, depth, 1,27 Straight knurl Pitch manufacturer’s option RKV 08 DIN 82 Figure (Please note there may be crossover dependent on diameter and pitch) Clearance on thread C Break edge NOTE NOTE Cable outlets may be manufactured as cast, fabricated or machined (manufactures option) No sharp edges / burrs permissible on internal or external surfaces / joints Surface finish of 1,6 µm max on all internal surfaces Figure BS EN 3660-064:2016 EN 3660-064:2016 Table — Fixed dimensions of shell ØA Shell size max ØB C E Thread 0,500-20UNF max max 08 22,48 15,67 12 28,83 21,79 10 25,65 14 32,00 16 35,18 18 41,53 22 47,89 28 0,625-24UNEF 24,99 0,875-20UNEF 15,3 15,3 15,3 1,000-20UNEF 30,94 1,0625-18UNEF 37,29 1,3125-18UNEF 15,3 15,3 1,1875-18UNEF 40,46 54,23 15,3 0,750-20UNEF 34,16 44,70 24 18,64 28,24 38,55 20 Dimensions in millimetres 15,3 15,3 1,4375-18UNEF 49,45 15,3 1,750-18UNS 15,3 Table — Variable dimensions of wiring chamber Dimensions in millimetres Length code wiring chamber A H J max max 35,5 16,57 50,5 31,60 27,5 B C 8,57 40,5 D 21,60 The code and dimensions of the wiring chamber shall be valid for all sizes of cable outlet Table — Mass for classes F (N), T, W and Z Shell size code 08 10 Nominal mass in grams Cable entry – size code Length code wiring chamber A B C D E F G H J K L M 10,7 11,3 — — — — — — — — — — A 11,9 12,5 — — — — — — — — — — C 11,4 12,7 12,4 13,4 14,0 12,0 13,3 — — — — 13,1 13,7 14,3 14,7 15,3 15,9 14,1 14,7 15,3 — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — B — D — B — — A C BS EN 3660-064:2016 EN 3660-064:2016 Shell size code 12 14 16 18 20 22 24 28 Cable entry – size code Length code wiring chamber A B C D E F G H J K L M 15,2 15,9 16,6 17,1 — — — — — — — — D 15,7 16,2 16,6 17,3 18,4 — — — — — — B 14,5 16,5 18,1 17,8 19,3 20,3 22,2 20,0 21,8 23,0 25,2 21,2 23,2 24,4 26,9 25,7 28,0 29,4 32,3 27,1 29,6 31,2 34,4 33,1 35,9 37,7 41,3 43,9 46,2 48,2 52,3 14,9 16,9 18,5 18,2 19,7 20,7 22,6 20,5 22,3 23,4 25,6 21,6 23,6 24,8 27,3 26,1 28,4 29,8 32,7 27,5 30,0 31,6 34,8 33,5 36,4 38,1 41,7 43,5 46,7 48,6 52,7 15,3 17,4 18,9 18,6 20,1 21,1 23,0 20,9 22,7 23,8 26,0 22,0 24,0 25,2 27,7 26,5 28,8 30,2 33,1 27,9 30,4 32,0 35,2 33,9 36,8 38,5 42,1 43,9 47,1 49,0 53,1 16,1 16,6 17,2 18,1 18,7 19,2 19,6 19,0 20,5 21,4 23,3 21,2 23,0 24,1 26,4 22,4 24,4 25,6 28,1 26,9 29,2 30,6 33,4 28,3 30,8 32,4 35,6 34,3 37,1 38,9 42,4 44,3 47,4 49,4 53,4 17,9 20,2 19,2 20,8 21,7 23,6 21,5 23,3 24,4 26,7 22,6 24,6 25,9 28,4 27,2 29,4 30,9 33,7 28,5 31,1 32,7 35,9 34,5 37,4 39,2 42,7 44,5 47,7 49,7 53,7 20,7 — — — 20,0 21,2 22,5 23,7 21,6 24,4 21,8 23,6 24,7 27,0 22,9 24,9 26,2 28,7 27,5 29,7 31,2 34,0 28,8 31,4 33,0 36,2 34,9 37,7 39,5 43,0 44,9 48,0 50,0 54,0 22,7 25,6 — — — — — — — 23,0 24,0 25,9 27,0 24,8 28,1 23,5 25,5 26,7 29,2 28,0 30,3 31,7 34,6 29,4 32,0 33,5 36,7 35,4 38,3 40,0 43,6 45,4 48,6 50,5 54,6 25,8 29,2 24,9 26,9 28,2 30,6 — — — — — — — — — — — — 33,9 37,1 35,8 38,6 40,4 44,0 45,8 48,9 50,9 55,0 — — — — — — — x — 33,3 32,3 — — — 32,1 29,8 — — 29,6 35,0 — — 28,4 30,7 — 31,9 36,2 — — — — — 30,3 31,3 34,5 35,4 32,9 37,7 36,4 39,2 41,0 44,5 46,4 49,5 51,5 55,5 33,8 38,6 — — — — — — — — — — — — — — — — — — — — — — — 36,6 37,7 41,2 42,3 39,4 44,7 46,6 49,7 51,7 55,7 40,5 45,8 — — D — B — — A C — D — B — — A C — D — B — — A C — D — B — — A C — D — B — — A C — D — B — — A C — D 51,1 B 48,0 52,1 53,1 56,8 C — 47,0 50,1 A 58,8 A C D BS EN 3660-064:2016 EN 3660-064:2016 Table — Mass for classes K and KE Shell size code 08 10 12 14 16 18 20 22 24 Nominal mass in grams Cable entry – size code Length code wiring chamber A B C D E F G H J K L M 26,9 28,5 — — — — — — — — — — A 29,8 31,4 — — — — — — — — — — C 28,7 31,9 31,0 33,5 35,0 38,1 35,9 39,0 41,0 44,9 42,9 46,7 49,1 53,9 48,2 52,8 55,6 61,3 52,1 57,1 60,2 66,5 62,0 67,8 71,4 78,5 66,1 72,5 76,5 84,5 78,6 30,3 33,6 — — — — 32,8 34,6 36,0 36,8 38,6 40,0 35,3 39,9 37,0 40,1 42,1 46,0 44,0 47,8 50,2 55,0 49,3 53,9 56,7 62,4 53,2 58,2 61,4 67,6 63,2 68,9 72,5 79,6 67,2 73,6 77,6 85,6 79,8 37,0 41,7 38,2 41,3 43,2 47,1 45,1 48,9 51,3 56,0 50,4 55,0 57,8 63,4 54,3 59,3 62,4 68,7 64,2 70,0 73,5 80,7 68,3 74,7 78,7 86,7 80,8 38,5 43,1 — — — — — — — — — — — — 40,1 41,6 43,0 45,1 46,7 48,1 43,2 49,0 46,0 49,8 52,2 57,0 51,4 55,9 58,7 64,4 55,2 60,3 63,4 69,7 65,2 70,9 74,5 81,7 69,2 75,6 79,7 87,7 81,8 44,7 50,6 46,8 50,6 53,0 57,7 52,1 56,6 59,4 65,1 55,9 60,9 64,1 70,3 65,9 71,6 75,2 82,3 69,9 76,3 80,3 88,4 82,5 46,1 51,9 — — — — — — — — — — 48,9 52,0 55,1 58,2 52,7 59,9 52,9 57,4 60,3 65,9 56,8 61,8 64,9 71,2 66,7 72,4 76,0 83,2 70,8 77,2 81,2 89,2 83,3 55,8 63,0 — — — — — — — — — — — — — — 56,1 58,8 63,4 66,2 60,6 69,1 58,3 63,3 66,4 72,7 68,2 74,0 77,5 84,7 72,3 78,7 82,7 90,7 84,8 63,4 71,9 62,1 67,1 70,2 76,5 — — — — — — — — — — — — — — — — — — — — — — 69,2 72,4 78,5 81,7 74,9 85,7 73,3 79,7 83,7 91,7 85,8 78,1 88,8 — — — — — — — — — — — — — — — — — — — — — — — — — — 74,7 77,0 85,1 87,5 81,1 93,1 87,3 83,4 95,5 87,7 — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — 90,7 — B — D — B — — A C — D — B — — A C — D — B — — A C — D — B — — A C — D — B — — A C — D — B — — A C — D — B — — — — A C D A BS EN 3660-064:2016 EN 3660-064:2016 Shell size code Cable entry – size code A B C D E F G H J K L M 85,8 86,9 88,0 88,9 89,6 90,4 91,9 92,9 94,4 94,8 97,8 — B 99,1 100,2 101,3 102.3 103,0 103,8 105,3 106,3 107,7 108,2 111,2 — D 90,2 28 91,3 92,4 93,4 94,1 94,9 96,4 97,4 98,8 99,3 102,3 — 103,6 104,8 105,8 106,8 107,5 108,3 109,8 110,8 112,3 112,7 113,7 116,7 111,8 112,9 114,0 114,9 115,6 116,4 117,9 118,9 120,4 120,8 121,8 124,8 116,7 117,8 118,9 119,9 120,6 121,4 122,9 123,9 125,3 125,8 126,8 129,8 126,7 127,8 128,9 129,9 130,6 131,4 132,9 133,9 135,3 135,8 136,8 139,8 4.2 Cable entry dimensions See Figure 2, Table NOTE Length code wiring chamber No burrs or sharp edges permitted Figure — Cable entry C A B C D BS EN 3660-064:2016 EN 3660-064:2016 Table Cable entry size code A C ØB + 0,2 max 6,4 9,4 14,0 1,12 3,9 5,5 7,7 E 11,1 14,1 G 15,9 9,5 12,7 H 19,1 J 22,2 K 25,5 L M Bundle/ Cable diameter ± 0,3 11,0 F D ± 0,1 7,9 D ØC ± 0,1 4,7 B NOTE ØA Dimensions in millimetres 28,6 31,8 12,6 15,7 18,9 22,0 25,2 28,4 31,5 34,7 12,2 15,5 17,1 18,7 20,3 23,5 26,7 29,8 33,0 36,2 39,4 1,12 1,12 1,12 1,12 2,0 5,4 7,4 12,4 15,5 1,12 15,4 1,75 1,75 1,75 9,0 10,5 10,4 1,75 7,5 9,4 1,12 1,12 4,0 18,4 21,4 25,4 28,4 12,0 18,5 21,5 25,0 28,0 31,0 The cable outlet shall be selected in accordance with the diameter of the cable bundle 4.3 Associated connectors See EN 3660-002 BS EN 3660-064:2016 EN 3660-064:2016 4.4 Front interface 4.4.1 AS85049 interface all classes See Figure 3, Figure and Table All dimensions are in millimetres Key 4,95 penetration of Ø J from front of serrations Figure — Detail X Figure — Detail Y Table Shell size ØG ØH Dimensions in millimetres ØJ N − 0,38 + 0,38 0 − 0,25 Number of teeth 10 12,55 11,00 9,53 15 14 18,67 17,12 08 12 16 18 20 22 24 28 9,14 15,49 21,84 23,27 26,44 29,62 32,79 38,40 7,59 6,86 13,94 12,98 20,29 18,03 22,07 25,25 28,42 31,60 37,31 14,86 20,04 23,22 26,39 29,31 35,28 12 21 24 30 33 36 39 42 54 BS EN 3660-064:2016 EN 3660-064:2016 4.4.2 Optional AS85049 interface, Classes K and KE (Stainless steel) only See Figure 5, Figure and Table Key 4,95 penetration of Ø L from front of serrations Figure — Detail X Figure — Detail Y Table Shell size ØG 20 22 24 28 N − 0,25 ± 0,13 Number of teeth 14,53 11,10 9,35 N/A N/A 15 20,62 17,22 17,45 18 M + 0,18 12 16 ØL ± 0,13 11,10 14 ØJ Ref 08 10 ØH 23,80 25,20 28,37 31,55 34,72 42,75 9,17 6,68 14,83 12,62 20,55 17,73 22,48 25,53 29,01 32,46 38,91 N/A N/A N/A N/A 15,98 14,86 4,44 21,46 20,04 4,34 27,61 26,39 4,42 25,02 31,62 37,97 N/A 23,22 29,31 35,28 N/A 4,24 4,09 3,99 12 21 24 30 33 36 39 42 54 BS EN 3660-064:2016 EN 3660-064:2016 4.5 Material and finish NOTE Class N in EN 3660-001 cross refers to class F in EN 3660-064 Material/Finish Class F (N) : Aluminium/Nickel plated (see note above) Material/Finish Class KE : Stainless steel (Passivated) Material/Finish Class K Material/Finish Class W Material Finish Class T Material/ Finish Class Z 4.6 Assembly torque : Stainless steel (Passivated) : Aluminium/Olive drab cadmium plated : Aluminium (Nickel PTFE plated) : Aluminium (Zinc Nickel plated) These torque values are intended for installation use only, see Table Table Shell size Assembly torque ± 0,56 Nm Classes K and KE Classes F (N), T, W, Z 08 6,33 4,52 12 12,20 4,52 16 13,11 10 14 18 20 22 24 28 8,59 13,11 13,11 15,37 15,37 15,37 16,72 4,52 4,52 4,52 4,52 9,04 9,04 9,04 13,56 Tests 5.1 Tests according to EN 2591-100 Test details to be in accordance with Table 9, EN 3660-001 and EN 2591-100 Qualification to be in accordance with EN 3660-001 BS EN 3660-064:2016 EN 3660-064:2016 Table EN 2591- Designation of the test Not applicable Applicable see EN 3660-00 Details 101 Visual examination X — 205 Housing (shell) electrical continuity X Cable outlet – connector connection 102 Examination of dimensions and mass X See 4.1 and 4.2 Class F (N): < 2,5 mΩ Class KE: < 10 mΩ < mΩ Class W: < 10 mΩ Class K: 212 Surface transfer impedance (from 100 MHz to GHz) a X Frequency 0,1 10 30 100 Shielding effectiveness from 100 MHz to GHz < mΩ Class Z: MHz 212 < mΩ Class T: X Class F (N) Zt (mΩ) Classes W, T, Z Classes K, KE 10 20 15 30 10 10 20 20 20 40 40 80 Test mounting as per 5.2 and Figure The Zt values correspond to the total surface impedance of the assembly Test shall be achieved with the same size and class EN 2997 connector and accessory Use Table assembly values for Minimum attenuation Frequency Classes F (N), T, W and Z Classes K and KE MHz dB dB 200 88 75 100 300 90 88 80 73 the BS EN 3660-064:2016 EN 3660-064:2016 EN 2591- Designation of the test Not applicable Applicable see EN 3660-00 Details 400 800 214 Lightning strike, current and voltage pulse 305 Rapid change of temperature 301 Endurance at temperature 000 X X — X TA − 65 Driving rain (Artificial) X 315 Fluid resistance X 402 Fire-resistance Shock X °C 175 See EN 3660-001 Not applicable — X — X 30 Test in accordance with IEC 60529 – Rating IP 67 Visually inspect for evidence of moisture ingress — X 30 Cable outlet not fitted to a connector and suspended with non-metallic cord Duration: Class F (N) 48 h Class W 500 h Class K 500 h Class KE 500 h Class T 500 h Class Z 500 h After conditioning housing shell continuity values may increase 100 % from pre-tested values — X X 30 260 313 318 − 65 KE X Flammability − 65 Sealing 317 °C 200 N/A Ozone resistance T1 F (N), K X 316 TB −5 Mould growth Immersion at low air pressure 65 +5 306 314 85 66 — W, T, Z Salt mist 71 85 Classes 307 87 Not applicable Method A BS EN 3660-064:2016 EN 3660-064:2016 EN 2591- Designation of the test 403 Sinusoidal vibration 406 Mechanical endurance 408 and random Mating and unmating forces Not applicable Applicable see EN 3660-00 X X X Shell Size Details Severity: 300 Number of shocks: One in each direction in three (3) perpendicular axis, i.e six (6) shocks Use Table values for the assembly For mounting method, please refer to EN 3660-001 When tested the connector accessories shall not be damaged, nor shall there be any loosening of parts during exposure to shock Monitoring discontinuity is not required Method B Figure and Table Level J Duration: Eight (8) hours at ambient temperature In each of three (3) axis Use Table values for the assembly For mounting method, please refer to EN 3660-001 When tested the connector accessories shall not be damaged, nor shall there be any loosening of parts during Vibration The coupling nut shall be within + 2,25/− 1,12 Nm of the initial value after vibration There shall be no reduction in the electrical continuity readings post vibration test 30 cycles, Method A Method A Values for test backshell alone Coupling Nm 08 10 12 14 Uncoupling Ratio max max 0,55 2:1 4:1 0,35 1,00 1,30 2:1 2:1 2:1 4:1 4:1 4:1 BS EN 3660-064:2016 EN 3660-064:2016 EN 2591- Designation of the test Not applicable Applicable see EN 3660-00 16 1,45 2:1 4:1 20 2,10 2:1 4:1 18 22 24 28 420 Mechanical strength of rear accessories Details X 1,80 2,40 2:1 4:1 Bending moment Classes F (N), T, Z and W Classes K and KE Nm Nm 10 10,20 14,70 14 22,60 33,90 6,20 20,30 28,20 18 31,60 20 33,90 22 39,50 24 Accessory thread strength 4:1 Record values of coupling torque Uncoupling torque shall have a minimum ratio: ≥ 2:1 with a maximum ratio of ≤ 4:1 16 423 4:1 2:1 3,10 12 X 2:1 2,75 08 Locking wire hole strength 4:1 Method Phase A Shell size 422 2:1 28 X Shell size 42,90 — 47,50 47,40 50,90 58,80 64,40 71,20 Nm Nm 12 5,64 16 41,80 Classes K and KE 5,64 14 30,50 Classes F (N), T, W and Z 08 10 6,80 8,47 5,64 11,30 5,64 16,95 5,64 15,82 16,95 BS EN 3660-064:2016 EN 3660-064:2016 EN 2591- Designation of the test Not applicable Applicable see EN 3660-00 Details 18 a Magnetic permeability GHz to 10 GHz under consideration X 16,95 11,30 19,77 20 11,30 24 11,30 22 513 5,64 28 — 21,48 19,77 19,77 21,48 BS EN 3660-064:2016 EN 3660-064:2016 5.2 Special tests – Surface transfer impedance / shielding effectiveness set-up See Figure Key 50 Ω termination load Injection line Semi-rigid cable To signal generator N type connector 30 mm of 93 % minimum coverage braid to be terminated with a band strap to the backshell This braid will then be mechanically terminated and soldered to a suitable machined tubular interface which is fitted to N-type connector Machined interface adaptor (shielding tube) to terminate between the backshell and a suitable N-type connector To receiver Figure BS EN 3660-064:2016 EN 3660-064:2016 Designation EXAMPLE Description block CABLE OUTLET Identity block EN3660-064K08BBA Product standard Material/Finish (see 4.5) Shell size (see Table 1) Length code wiring chamber (see Table 2) End-fitting size code (see Table 5) No digit to indicate clicking anti-decoupling Add letter A to indicate (non-clicking anti-de-coupling) NOTE NOTE No gaps are required between sections in the part number when printed If necessary, the code I9005 shall be placed between the description block and the identity block Marking See EN 3660-001 and Figure Technical specification See to EN 3660-001 This page deliberately left blank NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW British Standards Institution (BSI) BSI is the national body responsible for preparing British Standards and other standards-related publications, information and services BSI is incorporated by Royal Charter British Standards and other standardization products are published by BSI Standards Limited About us Revisions We bring together business, industry, government, consumers, innovators and others to shape their combined experience and expertise into standards -based solutions Our British Standards and other publications are updated by amendment or revision The knowledge embodied in our standards has been carefully assembled in a dependable format and refined through our open consultation process Organizations of all sizes and across all sectors choose standards to help them achieve their goals Information on standards We can provide you with the knowledge that your organization needs to succeed Find out more about British Standards by visiting our website at bsigroup.com/standards or contacting our Customer Services team or Knowledge Centre Buying standards You can buy and download PDF versions of BSI publications, including British and adopted European and international standards, through our website at bsigroup.com/shop, where hard copies can also be purchased If you need international and foreign standards from other Standards Development Organizations, hard copies can be ordered from our Customer Services team Subscriptions Our range of subscription services are designed to make using standards easier for you For further information on our subscription products go to bsigroup.com/subscriptions With British Standards Online (BSOL) you’ll have instant access to over 55,000 British and adopted European and international standards from your desktop It’s available 24/7 and is refreshed daily so you’ll always be up to date You can keep in touch with standards developments and receive substantial discounts on the purchase price of standards, both in single copy and subscription format, by becoming a BSI Subscribing Member PLUS is an updating service exclusive to BSI Subscribing Members You will automatically receive the latest hard copy of your standards when they’re revised or replaced To find out more about becoming a BSI Subscribing Member and the benefits of membership, please visit bsigroup.com/shop With a Multi-User Network Licence (MUNL) you are able to host standards publications on your intranet Licences can cover as few or as many users as you wish With updates supplied as soon as they’re available, you can be sure your documentation is current For further information, email bsmusales@bsigroup.com BSI Group Headquarters 389 Chiswick High Road London W4 4AL UK We continually improve the quality of our products and services to benefit your business If you find an inaccuracy or ambiguity within a British Standard or other BSI publication please inform the Knowledge Centre Copyright All the data, software and documentation set out in all British Standards and other BSI publications are the property of and copyrighted by BSI, or some person or entity that owns copyright in the information used (such as the international standardization bodies) and has formally licensed such information to BSI for commercial publication and use Except as permitted under the Copyright, Designs and Patents Act 1988 no extract may be reproduced, stored in a retrieval system or transmitted in any form or by any means – electronic, photocopying, recording or otherwise – without prior written permission from BSI Details and advice can be obtained from the Copyright & Licensing Department Useful Contacts: Customer Services Tel: +44 845 086 9001 Email (orders): orders@bsigroup.com Email (enquiries): cservices@bsigroup.com Subscriptions Tel: +44 845 086 9001 Email: subscriptions@bsigroup.com Knowledge Centre Tel: +44 20 8996 7004 Email: knowledgecentre@bsigroup.com Copyright & Licensing Tel: +44 20 8996 7070 Email: copyright@bsigroup.com