Copyright by the American Petroleum Institute Wed May 10 20 32 18 2006 Copyright by the American Petroleum Institute Wed May 10 20 32 25 2006 Data Supplied By API Monogram Licensed Mills Worldwide (in[.]
Copyright by the American Petroleum Institute Wed May 10 20:32:18 2006 Copyright by the American Petroleum Institute Wed May 10 20:32:25 2006 Data Supplied By API Monogram Licensed Mills Worldwide (in Metric Tonnes) Issued by: American Petroleum lnstitute Upstream Segment 1220 L Street, Northwest Washington, DC 20005-4070 Phone (202) 682-8375 Fax (202) 962-4776 Compiled by: Preston Publishing Company, Inc 621 Moody, Ste 104 Galveston, TX 77550 Tel: (409) 750-8800 Fax: (409) 750-8885 All rights resewed No part of this work may be repmduced, stored in a retrzeval system, or transmitted by any means, electronic, mechanical, photocopying, recording, or otherwise, withoutpnor written permission from the publisher Contact the Publishel; APZ Publzshzng Sewzces, 1220 L Street, N.W , Washzngton, D C 20005 Copyright O 2002 American Petroleum Institute Copyright by the American Petroleum Institute Wed May 10 20:32:25 2006 Copyright by the American Petroleum Institute Wed May 10 20:32:26 2006 2001 TONNAGE OF CASING SHIPPED -WORLDWIDE (Including Casing Liners) (in Metric Tonnes) SIZE OD (mm) NOMINAL PLAIN END WALL WEIGHT WEIGHT THICKNESS (Iblff) (kdm) (mm) H40 J55 K55 N80 M65 L80 0 250 0 0 0 0 0 0 0 TOTAL TONS PER SIZE: 0 0 TOTAL TONS PER SIZE: 33,873 24,876 9,079 3,386 TOTAL TONS PER SIZE: 730 6,661 3,956 2,011 TOTAL TONS PER SIZE: 101,6 - 16,89 7,26 L85 13Cr (a) C90 C95 High Collapse 95 T95 (b) L80 13Cr (a) All Other TOTAL ALL GRADES PI10 Q125 Other RY (c) 0 0 250 0 0 46 471 0 0 46 471 2,397 147 129 161 18,749 186 2,278 7,711 102,971 15 352 5,604 11 698 1,475 21,513 NOTE: SIZES IN ITALICS ARE THOSE NOT LISTED IN THE CURRENT EDITION OF SPEC 5CT (a) (b) (c) Weights are not applicable for L80 and L85 13Cr grades 95.000 psi minimum yield strength casing manufacturedto meet collapse pressures higher than that for Grade C95 casing of the same size and thickness Other Restricted Yield Strength Grades Includes any grade with a specified yield strength range of 20,000 psi or less which is not included in the table *Numbers may not add due to rounding Copyright by the American Petroleum Institute Wed May 10 20:32:26 2006 2001 Casing - East Page Iof 2001 TONNAGE OF CASING SHIPPED -WORLDWIDE (Including Casing Liners) (in Metric Tonnes) SIZE OD (In.) NOMINAL PLAIN END WALL WEIGHT WEIGHT THICKNESS (IbKt) (Iblft) (In.) High Collapse 95 T95 (b) PI10 Q125 Other RY (c) All Other TOTAL ALL GRADES 0 0 250 0 0 46 471 0 0 46 471 2,397 147 129 161 18,749 186 2,278 7,711 102,971 15 352 5,604 11 698 1,475 21,513 H40 J55 K55 N80 M65 L80 L80 13Cr (a) 0 250 0 0 0 0 0 0 0 TOTAL TONS PER SIZE: 0 0 TOTAL TONS PER SIZE: 33,873 24,876 9,079 3,386 TOTAL TONS PER SIZE: 730 6,661 3,956 2,011 TOTAL TONS PER SIZE: - - 11.35 0.286 L85 13Cr (a) C90 C95 NOTE: SIZES IN ITALICS ARE THOSE NOT LISTED IN THE CURRENT EDITION OF SPEC 5CT (a) (b) (c) Weights are not applicable for L80 and L85 13Cr grades 95.000 psi minimum yield strength casing manufacturedto meet collapse pressures higher than that for Grade C95 casing of the same size and thickness Other Restricted Yield Strength Grades Includes any grade with a specified yield strength range of 20,000 psi or less which is not included in the table *Numbers may not add due to rounding Copyright by the American Petroleum Institute Wed May 10 20:32:26 2006 2001 Casing - East Page Iof SIZE OD (mm) N80 M65 L80 L80 13Cr (a) 204 115 7,710 0 0 0 0 0 81,284 68 26,693 71 188,211 191,495 11,015 42.082 1,583 1,055 0 0 848 0 0 18 0 0 0 0 0 0 0 0 0 986 15,752 4,719 1,664 0 0 0 0 274 8,153 3.482 428 0 0 0 0 TOTAL TONS PER SIZE: 6,029 308,806 235.618 23.121 12,337 TOTAL TONS PER SIZE: 3,570 277 TOTAL TONS PER SIZE: 222 8,983 842 9,866 139.70 NOMINAL PLAIN END WALL WEIGHT WEIGHT THICKNESS (Ibm) (kdm) (mm) 14.00 15.50 17.00 20.00 23.00 26.00 26.80 29.70 32.60 35.30 38.00 40.50 43.10 20.41 22,88 25,13 29.52 33.57 38,02 39,78 44.14 48.49 52,61 56.68 60.55 64,40 8.20 6,99 7,72 9,17 10,54 I509 12,70 14,27 15,88 17,45 19,05 20,62 22,23 H40 J55 K55 1.364 L85 13Cr (a) C90 0 0 0 0 0 823 0 0 0 0 0 C95 0 1,423 297 0 0 0 0 0 0 0 823 0 High Collapse 95 T95 (b) 1,720 0 1,252 PI10 Q125 Other RY (c) All Other TOTAL ALL GRADES 0 0 255 0 23,524 322 54,070 0 8,138 0 0 0 0 0 0 0 0 0 0 0 108 0 329 0 0 0 1,183 5,691 2,119 0 0 0 0 26 90 2,912 1,178 11 0 0 0 0 81,582 28,484 438,939 123,982 16,225 931 856 912 329 18 0 34 9,303 4,217 692,258 331,615 335,481 352 87,461 437 0 0 3,270 0 2,561 44.010 NOTE: SIZES IN ITALICS ARE THOSE NOT LISTED IN THE CURRENT EDITION OF SPEC 5CT (a) (b) (c) Weights are not applicable for L80 and L85 13Cr grades 95,000 psi minimum yield strength casing manufacturedto meet collapse pressures higher than that for Grade C95 casing of the same size and thickness Other Restricted Yield Strength Grades Includes any grade with a specified yield strength range of 20,000 psi or less which is not included in the table *Numbers may not add due to rounding Copyright by the American Petroleum Institute Wed May 10 20:32:26 2006 2001 Casing - East Page of 72,370 SIZE OD (In.) N80 M65 L80 L80 13Cr (a) 204 115 7,710 0 0 0 0 0 81,284 68 71 26,693 188,211 191,495 11,015 42.082 1,583 1,055 0 0 848 0 0 18 0 0 0 0 0 0 0 0 0 986 15,752 4,719 1,664 0 0 0 0 274 8,153 3.482 428 0 0 0 0 TOTAL TONS PER SIZE: 6,029 308,806 235.618 23.121 12,337 TOTAL TONS PER SIZE: 3,570 277 TOTAL TONS PER SIZE: 222 8,983 842 9,866 112 NOMINAL PLAIN END WALL WEIGHT WEIGHT THICKNESS (Ib/ft) (Iblft) (In.) 14.00 15.50 17.00 20.00 23.00 26.00 26.80 29.70 32.60 35.30 38.00 40.50 43.10 13.71 15.36 16.89 19.83 22.56 25.54 26.72 29.67 32.57 35.35 38.08 40.69 43.26 0.244 0.275 0.304 0.361 0.415 0.476 0.500 0.562 0.625 0.687 0.750 0.812 0.875 H40 J55 K55 1.364 L85 13Cr (a) C90 0 0 0 0 0 823 0 0 0 0 0 C95 0 1,423 297 0 0 0 0 0 0 0 823 0 High Collapse 95 T95 (b) 1,720 0 1,252 PI10 Q125 Other RY (c) All Other TOTAL ALL GRADES 0 0 255 0 23,524 322 54,070 0 8,138 0 0 0 0 0 0 0 0 0 0 0 108 0 329 0 0 0 1,183 5,691 2,119 0 0 0 0 26 90 2,912 1,178 11 0 0 0 0 81,582 28,484 438,939 123,982 16,225 931 856 912 329 18 0 34 9,303 4,217 692,258 331,615 335,481 352 87,461 437 0 0 3,270 0 2,561 44.010 NOTE: SIZES IN ITALICS ARE THOSE NOT LISTED IN THE CURRENT EDITION OF SPEC 5CT (a) (b) (c) Weights are not applicable for L80 and L85 13Cr grades 95,000 psi minimum yield strength casing manufacturedto meet collapse pressures higher than that for Grade C95 casing of the same size and thickness Other Restricted Yield Strength Grades Includes any grade with a specified yield strength range of 20,000 psi or less which is not included in the table *Numbers may not add due to rounding Copyright by the American Petroleum Institute Wed May 10 20:32:26 2006 2001 Casing - East Page of 72,370 SIZE OD (mm) NOMINAL PLAIN END WALL WEIGHT WEIGHT THICKNESS (Ibm) (kdm) (mm) L80 13Cr (a) L85 13Cr (a) 0 0 0 29 H40 J55 K55 N80 M65 L80 0 0 0 0 0 0 0 147 1,970 30,660 18,230 10,444 0 0 0 0 35,667 34.828 34,247 542 313 0 0 0 0 0 0 0 0 0 0 0 3,026 18.606 43,758 7,082 311 0 0 0 TOTAL TONS PER SIZE: 61,457 105,597 72,783 20,774 TOTAL TONS PER SIZE: 1,006 3,886 1,655 0 0 0 0 177.80 196,90 17.00 20.00 23.00 26.00 29.00 32.00 35.00 38.00 41.00 42.70 46.40 50.10 53.60 57.50 46.10 24.89 29,12 33,70 38.21 42.78 47,20 51,52 55.52 60,14 63,41 69.01 74.58 79,93 85,29 67,74 5.87 6,91 8,05 9,19 10,36 11,51 12,65 13,72 14,99 1538 17,45 19,05 20,62 22,23 15,ll TOTAL TONS PER SIZE: 6.520 5,838 8,416 0 0 0 0 C90 0 0 0 0 0 0 C95 High Collapse 95 T95 (b) PI10 0 0 0 0 0 363 2,621 198 37 18,820 1,173 257 1,991 20,106 473 1,197 1,216 11,304 389 59 1,153 0 0 0 0 0 0 0 0 0 0 0 0 0 Q125 Other RY (c) All Other TOTAL ALL GRADES 0 0 217 104 19 0 19 0 1,953 3,297 3,692 3,912 2,161 0 0 0 0 2,978 13.300 6,452 2,503 366 0 0 0 147 1,970 77,267 111,840 127,959 36,865 4,886 171 83 0 19 0 0 0 0 33 65 2,234 1,491 3,628 52,102 415 15,032 25,598 361,207 1,062 891 284 29 5,500 774 2,483 31 17,601 0 0 0 0 192 0 192 0 0 0 0 192 0 192 NOTE: SIZES IN ITALICS ARE THOSE NOT LISTED IN THE CURRENT EDITION OF SPEC 5CT (a) (b) (c) Weights are not applicable for L80 and L85 13Cr grades 95,000 psi minimum yield strength casing manufacturedto meet collapse pressures higher than that for Grade C95 casing of the same size and thickness Other Restricted Yield Strength Grades Includes any grade with a specified yield strength range of 20,000 psi or less which is not included in the table *Numbers may not add due to rounding Copyright by the American Petroleum Institute Wed May 10 20:32:26 2006 2001 Casing - East Page of SIZE OD (In.) NOMINAL PLAIN END WALL WEIGHT WEIGHT THICKNESS (Ib/ft) (Iblft) (In.) L80 13Cr (a) L85 13Cr (a) 0 0 0 29 H40 J55 K55 N80 M65 L80 0 0 0 0 0 0 0 147 1,970 30,660 18,230 10,444 0 0 0 0 35,667 34.828 34,247 542 313 0 0 0 0 0 0 0 0 0 0 0 3,026 18.606 43,758 7,082 311 0 0 0 TOTAL TONS PER SIZE: 61,457 105,597 72,783 20,774 TOTAL TONS PER SIZE: 1,006 3,886 1,655 0 0 0 0 7 314 17.00 20.00 23.00 26.00 29.00 32.00 35.00 38.00 41.00 42.70 46.40 50.10 53.60 57.50 46.10 16.72 19.56 22.65 25.69 28.75 31.70 34.61 37.29 40.30 42.65 46.36 50.11 53.71 57.29 45.54 0.231 0.272 0.317 0.362 0.408 0.453 0.498 0.540 0.590 0.625 0.687 0.750 0.812 0.875 0.595 TOTAL TONS PER SIZE: 6.520 5,838 8,416 0 0 0 0 C90 0 0 0 0 0 0 C95 High Collapse 95 T95 (b) PI10 0 0 0 0 0 363 2,621 198 37 16,820 1,173 257 1,991 20,106 473 1,197 1,216 11,304 389 59 1,153 0 0 0 0 0 0 0 0 0 0 0 0 0 Q125 Other RY (c) All Other TOTAL ALL GRADES 0 0 217 104 19 0 19 0 1,953 3,297 3,692 3,912 2,161 0 0 0 0 2,978 13.300 6,452 2,503 366 0 0 0 147 1,970 77,267 111,840 127,959 36,865 4,886 171 83 0 19 0 0 0 0 33 65 2,234 1,491 3,628 52,102 415 15,032 25,598 361,207 1,062 891 284 29 5,500 774 2,483 31 17,601 0 0 0 0 192 0 192 0 0 0 0 192 0 192 NOTE: SIZES IN ITALICS ARE THOSE NOT LISTED IN THE CURRENT EDITION OF SPEC 5CT (a) (b) (c) Weights are not applicable for L80 and L85 13Cr grades 95,000 psi minimum yield strength casing manufacturedto meet collapse pressures higher than that for Grade C95 casing of the same size and thickness Other Restricted Yield Strength Grades Includes any grade with a specified yield strength range of 20,000 psi or less which is not included in the table *Numbers may not add due to rounding Copyright by the American Petroleum Institute Wed May 10 20:32:26 2006 2001 Casing - East Page of 2001 TONNAGE OF TUBING SHIPPED -WORLDWIDE (in Metric Tonnes) SIZE NOMINAL PLAIN END WALL END OD WEIGHT WEIGHT THICKNESS FINISH (In.) (Ibm) (Ib/ft) (In.) (a) 1.050 1.14 1.20 - 1.54 - 1.13 1.13 1.13 0.113 0.113 0.113 NUIOR EUIOR PE 1.48 1.48 0.154 0.154 EUIOR PE TOTAL TONS PER SIZE: 1.315 1.70 1.72 1.80 - 2.24 - 1.68 1.68 1.68 1.68 2.17 2.17 0.133 0.133 0.133 0.133 0.179 0.179 H40 J55 N80 M65 L80 L80 13Cr (b) L85 13Cr (b) C90 T95 PI10 Other RY (c) All Other TOTAL ALL GRADES 0 0 0 0 0 2 1,137 0 0 0 0 0 1,137 3,197 115 0 0 0 0 43 3,356 NUIOR IJIOR EUIOR PE EUIOR PE TOTAL TONS PER SIZE: IJIOR PE NUIOR IJIOR EUIOR PE EUIOR PE TOTAL TONS PER SIZE: 1.900 2.40 - 2.75 2.76 2.90 - 2.37 2.37 2.72 2.72 2.72 2.72 0.125 0.125 0.145 0.145 0.145 0.145 IJIOR PE NUIOR IJIOR EUIOR PE NOTE: SIZES IN ITALICS ARE THOSE NOT LISTED IN THE CURRENT EDITION OF SPEC 5CT (a) (b) (c) NU = Non Upset PE = Plain End 8R = Round Thread EU = External Upset Weights are not applicable for L80 and L85 13Cr grades Includes any other grade which has a specified yield strength range of 20,000 psi or less & not included in the table *Numbers may not add due to rounding Copyright by the American Petroleum Institute Wed May 10 20:32:26 2006 IJ = Integral Joint 10R = 10 Round Thread 2001 Tubing - East PageI of SIZE NOMINAL PLAIN END WALL END OD WEIGHT WEIGHT THICKNESS FINISH (rnrn) (Ibfi) (Wm) (rnrn) (a) H40 J55 N80 M65 L80 L80 13Cr (b) L85 13Cr (b) C90 T95 PI10 Other RY (c) All Other TOTAL ALL GRADES TOTAL TONS PER SIZE: 2,323 687 0 0 0 0 258 3,268 TOTAL TONS PER SIZE: 879 1,333 0 0 0 0 99 2,311 3,185 74,645 8,707 1,707 346 0 119 302 5,558 $4,569 NUIOR PE NUIOR EU8R PE NU8R EUBR PE PE EU8R PE TOTAL TONS PER SIZE: NU NUIOR EU8R PE NUIOR EU8R PE NUIOR EU8R PE PE NOTE: SIZES IN ITALICS ARE THOSE NOT LISTED IN THE CURRENT EDITION OF SPEC 5CT (a) (b) (c) PE = Plain End 8R = Round Thread EU = External Upset NU = Non Upset Weights are not applicable for L80 and L85 13Cr grades Includes any other grade which has a specified yield strength range of 20,000 psi or less & not included in the table *Numbers may not add due to rounding Copyright by the American Petroleum Institute Wed May 10 20:32:26 2006 IJ = Integral Joint 10R = 10 Round Thread 2001 Tubing - East Page of SIZE NOMINAL PLAIN END WALL END OD WEIGHT WEIGHT THICKNESS FINISH (In.) (Ib/ft) (Ib/ft) (In.) (a) H40 J55 N80 M65 L80 L80 13Cr (b) L85 13Cr (b) C90 T95 PI10 Other RY (c) All Other TOTAL ALL GRADES TOTAL TONS PER SIZE: 2,323 687 0 0 0 0 258 3,268 TOTAL TONS PER SIZE: 879 1,333 0 0 0 0 99 2,311 3,185 74,645 8,707 1,707 346 0 119 302 5,558 $4,569 NUIOR PE NUIOR EU8R PE NUBR EUBR PE PE EUBR PE TOTAL TONS PER SIZE: NU NUIOR EUBR PE NUIOR EU8R PE NUIOR EUBR PE PE NOTE: SIZES IN ITALICS ARE THOSE NOT LISTED IN THE CURRENT EDITION OF SPEC 5CT (a) (b) (c) NU = Non Upset PE = Plain End 8R = Round Thread EU = External Upset Weights are not applicable for L80 and L85 13Cr grades Includes any other grade which has a specified yield strength range of 20,000 psi or less & not included in the table *Numbers may not add due to rounding Copyright by the American Petroleum Institute Wed May 10 20:32:26 2006 IJ = Integral Joint 10R = 10 Round Thread 2001 Tubing - East Page of