BRITISH STANDARD BS A 306 1994 ISO 8280 1993 Rivets, solid, universal head, metallic material, with or without surface treatment — Dimensions UDC 621 884 629 7 BS A 306 1994 This British Standard, hav[.]
BRITISH STANDARD Rivets, solid, universal head, metallic material, with or without surface treatment — Dimensions UDC 621.884:629.7 BS A 306:1994 ISO 8280:1993 BS A 306:1994 Committees responsible for this British Standard The preparation of this British Standard was entrusted by the Aerospace Standards Policy Committee (ACE/-) to Technical Committee ACE/12, upon which the following bodies were represented: The Association of Electronics, Telecommunications and Business Equipment Industries British Industrial Fastners Federation Ministry of Defence Society of British Aerospace Companies Ltd This British Standard, having been prepared under the direction of the Aerospace Standards Policy Committee, was published under the authority of the Standards Board and comes into effect on 15 August 1994 © BSI 01-2000 The following BSI references relate to the work on this standard: Committee reference ACE/12 Draft for comment 91/82708 DC ISBN 580 23220 Amendments issued since publication Amd No Date Comments BS A 306:1994 Contents Page Committees responsible Inside front cover National foreword ii Scope Normative reference Configuration and dimensions Figure 1 Table — Dimensions (except length L1 ) Table — Lengths L1 for rivets in aluminium and aluminium alloys Table — Lengths L1 for rivets in nickel alloys, corrosion-resistant steels, commercially pure titanium and titanium alloys List of references Inside back cover © BSI 01-2000 i BS A 306:1994 National foreword This British Standard has been prepared under the direction of the Aerospace Standards Policy Committee It is identical with ISO 8280:1993 Aerospace — Rivets, solid, universal head, metallic material, with or without surface treatment — Dimensions published by the International Organization for Standardization (ISO) Cross-reference International Standard Corresponding British Standard ISO 286-2:1988 BS EN 20286 ISO system of limits and fits Part 2:1992 Tables of standard tolerance grades and limit deviations for holes and shafts (Identical) A British Standard does not purport to include all the necessary provisions of a contract Users of British Standards are responsible for their correct application Compliance with a British Standard does not of itself confer immunity from legal obligations Summary of pages This document comprises a front cover, an inside front cover, pages i and ii, pages to 4, an inside back cover and a back cover This standard has been updated (see copyright date) and may have had amendments incorporated This will be indicated in the amendment table on the inside front cover ii © BSI 01-2000 BS A 306:1994 Scope This International Standard specifies the dimensions of universal head solid rivets, in metallic material, with or without surface treatment It is intended for the drawing up of aerospace product standards Normative reference The following standard contains provisions which, through reference in this text, constitute provisions of this International Standard At the time of publication, the edition indicated was valid All standards are subject to revision, and parties to agreements based on this International Standard are encouraged to investigate the possibility of applying the most recent edition of the standard indicated below Members of IEC and ISO maintain registers of currently valid International Standards ISO 286-2:1988, ISO system of limits and fits — Part 2: Tables of standard tolerance grades and limit deviations for holes and shafts Configuration and dimensions See Figure and Table to Table Dimensions and tolerances are expressed in millimetres They are applicable after any surface treatment 1) The Length range is limited (see Table and Table 3) 2) Drill start option, only for corrosion-resistant steel, nickel alloys, commercially pure titanium, titanium alloys Figure © BSI 01-2000 BS A 306:1994 Diameter code 016 020 025 030 035 040 050 060 080 100 D Table — Dimensions (except length L1) D D H L d11 b max max 1,6 3,36 3,04 1,6 1,2 — — 0,9 0,7 4,2 3,8 2,0 1,5 — — 1,1 0,9 2,5 5,25 4,75 2,5 1,8 2,0 1,7 1,3 1,1 6,3 5,7 3,0 2,2 2,4 2,1 1,5 1,3 3,5 7,35 6,65 3,5 2,6 2,8 2,45 1,8 1,6 8,4 7,6 3,2 2,8 2,0 1,8 10,5 9,5 5,0 3,7 4,0 3,5 2,4 12,6 11,4 6,0 4,5 4,8 4,2 16,8 15,2 6,4 21 19 7,5 10 a Over length L , b See ISO 286-2 D a 10,0 max max L max R — — — 2,4 0,8 0,5 0,9 0,6 3,7 1,05 0,70 4,3 1,2 0,8 4,9 2,2 1,5 1,0 6,1 2,8 2,6 1,8 1,2 7,3 5,6 3,7 3,5 2,4 1,6 9,8 4,5 4,3 1,6 2 ± 0,08 — 1,4 R 0,15 0,25 12,2 D1 max may increase by 0,03 © BSI 01-2000 BS A 306:1994 Length Code L1 +0,5 003 004 005 006 007 008 009 010 011 012 013 014 015 016 017 018 019 020 022 024 026 028 030 032 035 040 045 050 055 060 Table — Lengths L1 for rivets in aluminium and aluminium alloys 016 020 025 Diameter code 035 040 050 030 Shape of tail A A A B A B A B A B 060 080 100 enda A B A B A B A B + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + 10 + + + + + + + + + + + + + + 11 + + + + + + + + + + + + + + 12 + + + + + + + + + + + + + + 13 + + + + + + + + + + + + + + + + 14 + + + + + + + + + + + + + + + + 15 + + + + + + + + + + + + + + + + 16 + + + + + + + + + + + + + + + + 17 + + + + + + + + + + + + + + + + 18 + + + + + + + + + + + + + + + + 19 + + + + + + + + + + + + + + + 20 + + + + + + + + + + + + + + + 22 + + + + + + + + + + + + + + 24 + + + + + + + + + + + + + + 26 + + + + + + + + + + + + 28 + + + + + + + + + + + + 30 + + + + + + + + + + + 32 + + + + + + + + + + + 35 + + + + + + + + + + + + + + + + + + + + + + + + + + + + 55 + + + + 60 + + + + 40 45 50 a Form A: non-radiused tail end (see Figure 1) Form B: radiused tail end (see Figure 1) © BSI 01-2000 BS A 306:1994 Table — Lengths L1 for rivets in nickel alloys, corrosion-resistant steels, commercially pure titanium and titanium alloys Lengths Code L1 016 +0,5 003 004 005 006 007 008 009 010 011 012 013 014 015 016 017 018 019 020 022 024 026 028 030 032 035 040 020 025 Diameter code 035 030 Shape of tail A A A B A B A 040 050 060 enda B A B A B A B + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + 10 + + + + + + + + + + + + + + 11 + + + + + + + + + + + + + + 12 + + + + + + + + + + + + + + 13 + + + + + + + + + + + + + + 14 + + + + + + + + + + + + + + 15 + + + + + + + + + + + + + + 16 + + + + + + + + + + + + + + 17 + + + + + + + + + + + + 18 + + + + + + + + + + + + 19 + + + + + + + + + + 20 + + + + + + + + + + 22 + + + + + + + + 24 + + + + + + + + 26 + + + + + + 28 + + + + + + 30 + + + + 32 + + + + 35 + + 40 + + a Form A: non-radiused tail end (see Figure 1) Form B: radiused tail end (see Figure 1) © BSI 01-2000 BS A 306:1994 List of references See national foreword © BSI 01-2000 BS A 306:1994 ISO 8280:1993 BSI — British Standards Institution BSI is the independent national body responsible for preparing British Standards It presents the UK view on standards in Europe and at the international level It is incorporated by Royal Charter Revisions British Standards are updated by amendment or revision Users of British Standards should make sure that they possess the latest amendments or editions It is the constant aim of BSI to improve the quality of our products and services We would be grateful if anyone finding an inaccuracy or ambiguity while using this British Standard would inform the Secretary of the technical committee responsible, the identity of which can be found on the inside front cover Tel: 020 8996 9000 Fax: 020 8996 7400 BSI offers members an individual updating service called PLUS which ensures that subscribers automatically receive the latest editions of standards Buying standards Orders for all BSI, international and foreign standards publications should be addressed to Customer Services Tel: 020 8996 9001 Fax: 020 8996 7001 In response to orders for international standards, it is BSI policy to supply the BSI implementation of those that have been published as British Standards, unless otherwise requested Information on standards BSI provides a wide range of information on national, European and international standards through its Library and its Technical Help to Exporters Service Various BSI electronic information services are also available which give details on all its products and services Contact the Information Centre Tel: 020 8996 7111 Fax: 020 8996 7048 Subscribing members of BSI are kept up to date with standards developments and receive substantial discounts on the purchase price of standards For details of these and other benefits contact Membership Administration Tel: 020 8996 7002 Fax: 020 8996 7001 Copyright BSI 389 Chiswick High Road London W4 4AL Copyright subsists in all BSI publications BSI also holds the copyright, in the UK, of the publications of the international standardization bodies Except as permitted under the Copyright, Designs and Patents Act 1988 no extract may be reproduced, stored in a retrieval system or transmitted in any form or by any means – electronic, photocopying, recording or otherwise – without prior written permission from BSI This does not preclude the free use, in the course of implementing the standard, of necessary details such as symbols, and size, type or grade designations If these details are to be used for any other purpose than implementation then the prior written permission of BSI must be obtained If permission is granted, the terms may include royalty payments or a licensing agreement Details and advice can be obtained from the Copyright Manager Tel: 020 8996 7070