Errata –RP 13c Date of Issue August 2016 Affected Publication API MPMS Chapter 4 9 4, Proving Systems, First Edition, October 2010 ERRATA Section 6 3 4, item 37 change 8 through 80 to Repeat the steps[.]
Date of Issue: August 2016 Affected Publication: API MPMS Chapter 4.9.4, Proving Systems, First Edition, October 2010 ERRATA Section 6.3.4, item 37: change through 80 to Repeat the steps in 6.3.3 and 6.3.4 until the criteria for a satisfactory calibration have been satisfied Section A.7: change [Equation (A.10)] to (See A.4 and A.5) Section A.10: change WD is the value for a single calibration pass corrected for CTSp [Equation (18)]; CPSp is the correction for the effect of pressure on steel prover [Equation (14)]; CPLp is the correction for compressibility of the water in prover [Equation (16)] to WD is the value for a single calibration pass corrected for CTSp [Equation (A.20)]; CPSp is the correction for the effect of pressure on steel prover [Equation (A.16)]; CPLp is the correction for compressibility of the water in prover [Equation (A.18)]