maquette MCIS501E INTERNATIONAL STANDARD TECHNICAL CORRIGENDUM 1 ISO 22915 13 2012 Published 2013‐11‐01 INTERNATIONAL ORGANIZATION FOR STANDARDIZATION МЕЖДУНАРОДНАЯ ОРГАНИЗАЦИЯ ПО СТАНДАРТИЗАЦИИ O[.]
INTERNATIONAL STANDARD ISO 22915-13:2012 TECHNICAL CORRIGENDUM 1 Published 2013‐11‐01 INTERNATIONAL ORGANIZATION FOR STANDARDIZATION МЕЖДУНАРОДНАЯ ОРГАНИЗАЦИЯ ПО СТАНДАРТИЗАЦИИ ORGANISATION INTERNATIONALE DE NORMALISATION Industrial trucks — Verification of stability — Part 13: Rough-terrain trucks with mast TECHNICAL CORRIGENDUM 1 Chariots de manutention — Vérification de la stabilité — Partie 13: Chariots tout-terrain mât RECTIFICATIF TECHNIQUE Technical Corrigendum 1 to ISO 22915‐13:2012 was prepared by Technical Committee ISO/TC 110, Industrial trucks, Subcommittee SC 4, Rough-terrain trucks Page Replace the first page of Table 1 with the following, thereby correcting the indication of the position of the mast for Tests 3 and 5 to full rearward ICS 53.060 © ISO 2013 – All rights reserved Published in Switzerland Ref No ISO 22915-13:2012/Cor.1:2013(E) x x x x x x Lateral Load leading Load trailing Travelling Stacking/retrieving With Without Maximum Travel With Without Full rearward Vertical Truck position on tilt table Tilt table angle for actual capacity Position of mast 22 % 6 % or 7 % x a x x x x x x Test x (see 4.3) x Test Longitudinal Lateral slope correction Stabilizer device and/or axle locking Lift height Load at load centre D Mode of operation Direction of load handling device Direction of test Test criteria b 10 % or 12 % x (see 4.4) x x x x x x x x Test Table — Verification of stability c 40 % or 50 % x x x x x x x Test 10 % x x x x x x x Test ISO 22915-13:2012/Cor.1:2013(E) © ISO 2013 – All rights reserved