maquette MCIS501E ICS 25 220 20 Ref No ISO 10216 2010/Cor 1 2011(E) © ISO 2011 – All rights reserved Published in Switzerland INTERNATIONAL STANDARD ISO 10216 2010 TECHNICAL CORRIGENDUM 1 Published 20[.]
INTERNATIONAL STANDARD ISO 10216:2010 TECHNICAL CORRIGENDUM Published 2011-04-01 INTERNATIONAL ORGANIZATION FOR STANDARDIZATION • МЕЖДУНАРОДНАЯ ОРГАНИЗАЦИЯ ПО СТАНДАРТИЗАЦИИ • ORGANISATION INTERNATIONALE DE NORMALISATION Anodizing of aluminium and its alloys — Instrumental determination of image clarity of anodic oxidation coatings — Instrumental method TECHNICAL CORRIGENDUM Anodisation de l'aluminium et de ses alliages — Détermination de la netteté d'image sur couches anodiques — Méthode instrumentale RECTIFICATIF TECHNIQUE Technical Corrigendum to ISO 10216:2010 was prepared by Technical Committee ISO/TC 79, Light metals and their alloys, Subcommittee SC 2, Organic and anodic oxidation coatings on aluminium Page Replace Figure with the following figure ICS 25.220.20 © ISO 2011 – All rights reserved Published in Switzerland Ref No ISO 10216:2010/Cor.1:2011(E) ISO 10216:2010/Cor.1:2011(E) Key 10 11 12 13 14 15 16 condensing lens test piece collimator slit light source one slit of combed sliding shutter photo receiver optical comb adjusting for sensitivity zero-adjustment knob knob for adjustment of sensitivity knob for fine adjustment of sensitivity light intensive recorder cross-section of incident light illuminated light spot on the test piece cross-section of incident light Figure — Example of testing apparatus for image clarity measurement © ISO 2011 – All rights reserved