Microsoft Word C043760e doc ICS 21 060 30 Ref No ISO 887 2000/Cor 1 2006(E) © ISO 2006 – All rights reserved Printed in Switzerland INTERNATIONAL STANDARD ISO 887 2000 TECHNICAL CORRIGENDUM 1 Publishe[.]
INTERNATIONAL STANDARD ISO 887:2000 TECHNICAL CORRIGENDUM Published 2006-01-15 INTERNATIONAL ORGANIZATION FOR STANDARDIZATION • МЕЖДУНАРОДНАЯ ОРГАНИЗАЦИЯ ПО СТАНДАРТИЗАЦИИ • ORGANISATION INTERNATIONALE DE NORMALISATION Plain washers for metric bolts, screws and nuts for general purposes — General plan TECHNICAL CORRIGENDUM Rondelles plates pour vis et écrous métriques pour usages généraux — Plan général RECTIFICATIF TECHNIQUE Technical Corrigendum to International Standard ISO 887:2000 was prepared by Technical Committee ISO/TC 2, Fasteners Page 2, Table Delete dimension h = 1,2 mm from the table Page 4, Table 3, Nominal size (Thread size, d) = mm, Large series, Product grade A, column h Replace h = 1,2 mm by h = mm in the table Page 4, Table 3, Nominal size (Thread size, d) = mm, Large series, Product grade C, column h Replace h = 1,2 mm by h = mm in the table ICS 21.060.30 © ISO 2006 – All rights reserved Printed in Switzerland Ref No ISO 887:2000/Cor.1:2006(E)