Tài liệu ôn tập HK

303-13-1 Evaporative Emissions 303-13-1 SECTION 303-13 Evaporative Emissions VEHICLE APPLICATION: 2011.50 Ranger CONTENTS PAGE DESCRIPTION AND OPERATION Evaporative Emissions 303-13-2 REMOVAL AND INSTALLATION Evaporative Emission Canister (29 250 0) 303-13-3 Evaporative Emissions 303-13-2 303-13-2 DESCRIPTION AND OPERATION Evaporative Emissions Item Part Number Description Evaporative emission canister Evaporative emission canister to evaporative emission canister purge valve vapor line - Fuel tank vent to evaporative emission canister line Item Description Evaporative emission canister to evaporative emission canister purge valve vapor line Evaporative emission canister purge valve Evaporative emission canister purge valve to intake manifold vapor line Evaporative emission canister purge valve electrical connector 2011.50 Ranger G1272709en 303-13-3 Evaporative Emissions 303-13-3 REMOVAL AND INSTALLATION Evaporative Emission Canister(29 250 0) Removal CAUTION: Do not smoke, carry lighted tobacco or have an open flame of any type when working on or near any fuel-related component Highly flammable mixtures are always present and may be ignited Failure to follow these instructions may result in serious personal injury NOTE: Removal steps in this procedure may contain installation details Refer to: Gasoline and Gasoline-Ethanol Fuel Systems Health and Safety Precautions (100-00 General Information, Description and Operation) Refer to: Battery Disconnect and Connect (414-01 Battery, Mounting and Cables, General Procedures) Refer to: Lifting (100-02 Jacking and Lifting, Description and Operation) WARNING: Be prepared to collect escaping fluids Installation To install, reverse the removal procedure 2011.50 Ranger G1272710en