901 n0049 v19 治具設備保養作業規範tools and equipment maintenance instruction

Document Content Addition of Document Alteration of Document Doc No.: 901-N0049 Subject: Tools and Equipment Maintenance Instruction Revocation of Document REV: 19 PAGE OF 36 Revision History Rev Status Revision Date 2008/08/18 Revised By Stanley Chou Description New 2008/09/09 Stanley Chou UPDATE : TN1->All Org Revocation of file “UPDATE : TN1->All Org 902-K0005,902-K0006 902-K0005,902-K0006” 6.11 Added section 6.11: “Probe replacement” 6.12 Connector Cable Added section 6.12: “Connector and cable replacement” 6.12.2 ADM ATB MCX(M) Connector & Cable Added section 6.12.2: “The MCX(M) connector & cable used by the ADM ATB tool must be replaced every three months The PE should affix new labels on the cables after replacement to indicate their usage period.” 3.0 , NQX Revised section 3.0 “DEFINITION” and added “NQX” 4.0 , NQX Revised section 4.0 “RESPONSIBILITY” and added “NQX” 6.1,6.3 NQX Revised section 6.1 and 6.3 “ACTIVITIES DESCRIPTION” and added “NQX” 2 2009/03/24 Richard Wan 2011/06/23 Qiang Li 2012/11/21 2013/06/07 2013/09/25 Jack GH Lee Arthur SD Chang David.Shi : NQJ/NQX Changed the tool maintenance units of NQJ/NQX The information contained herein is the exclusive property of WNC and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission from WNC Form No.: 2-JQ-021-04, 006