Tài liệu ADC KRONE - Guide - Fiber in Broacast & Production Facility - 10 thing should know doc
Tài liệu ADC KRONE - Guide - Fiber in Broacast & Production Facility - 10 thing should know docx
... Terminations 8
7. Splicing vs. Field Connectors 9
8. Slack Storage 10
9. Fiber Density 11
10. Planning for Future Growth 12
Fiber for Broadcast and Entertainment Professionals
Top Ten Things to Know
Top ... include:
• Bend radius: At turns in fiber runs, maintain a 1.5-inch
bend radius. Tighter bends may cause micro-bending
of individual fibers that allow light to escape the sign...
Tài liệu ADC KRONE - Guide - Fiber in Broacast & Production Facility - 10 thing should know doc
... Terminations 8
7. Splicing vs. Field Connectors 9
8. Slack Storage 10
9. Fiber Density 11
10. Planning for Future Growth 12
Fiber for Broadcast and Entertainment Professionals
Top Ten Things to Know
Top ... include:
• Bend radius: At turns in fiber runs, maintain a 1.5-inch
bend radius. Tighter bends may cause micro-bending
of individual fibers that allow light to escape the sign...
Tài liệu ADC KRONE - Guide - Fiber in Broadcast & Production Facilities pptx
... Terminations 8
7. Splicing vs. Field Connectors 9
8. Slack Storage 10
9. Fiber Density 11
10. Planning for Future Growth 12
Fiber for Broadcast and Entertainment Professionals
Top Ten Things to Know
Top ... include:
• Bend radius: At turns in fiber runs, maintain a 1.5-inch
bend radius. Tighter bends may cause micro-bending
of individual fibers that allow light to escape the sign...
Tài liệu ADC KRONE - Guide - EDF - Centralized Cross-Connection for managing Ethernet Data Services doc
... Frame
2
www .adc. com • + 1-9 5 2-9 3 8-8 080 • 1-8 0 0-3 6 6-3 891
Benefits
• Lower operating costs. As compared to direct connect or interconnect designs, the EDF cross-
connect reduces the time it takes for adding ... rapid changes to the network. Turning-up new service is
accomplished by plugging in a patch cord instead of the labor-intensive task of making multiple hard-wir...
Tài liệu ADC KRONE - Guide - FO - Laser Optimized Fiber better in Price, Bandwidth, and Distance ppt
... 802.3z
100 0BASE-SX
Gigabit Link @ 1310nm
Laser IEEE 802.3z
100 0BASE-LX
10 Gigabit Link @ 850nm
Laser IEEE 802.3ae
10GBASE-SR
10 Gigabit Link @ 1 310
CWDM Laser IEEE
802.3ae 10GBASE-LX4*
62.5/125 ... now 10 Gigabit. The rapid growth of Internet use
and bandwidth-intensive applications combined with routine transmission of
large files is driving the need for 10 Gigabit Ether...
Tài liệu ADC KRONE - Guide - FO - Field Performance Testing of Fiber Link - ISO 11801 ppt
... & Tail Cords.
Inter-building Campus Cabling
Use LSPM 2 x wavelengths, both in 2 x directions,
AND ALSO
Use OTDR For Links less than 300m, It is not an ADC KRONE requirement.
For Links ... Pacific)
OF Testing ADC KRONE Requirements V7_1&3T Dr2Page 10 of 12
27 OTDR Testing, Unacceptable Results Due To Ghosting
“Ghosting” is the persence of multiple peaks in...
Tài liệu ADC KRONE - Guide - FO - The challenge in using APC connector ppt
... optical fiber) . We can find z by using the law of sines:
c=z
C=2α
A=9 0- α+θ
(
)
b =
y +
2tan
α
x
0
c =
sin(A)
bsin(C)
cos
α
1
2 cos
α
1
(Using the imaginary lines in Figure 4 to find the ... the pistoning of the fiber
within the ferrule. But if we reduce the minimum fiber height requirement, we can easily increase the
apex offset a small amount and maintain physical contact i...
Tài liệu ADC KRONE - Guide - FO - The Key to Unlocking Fiber competitive advantages doc
... 24 -fiber, 72 -fiber , 96 -fiber and 144 -fiber cables. Trying to match these cables up to
splice panels based on a 144 -fiber capacity can be difficult and generally involves splitting the sub-units ... the termination panels used in the ODF.
In large fiber count applications, with more than 432 incoming OSP fibers, splicing in a remote location can increase the
termination densi...
Từ khóa: