... and Gupta J.K., Text book on Machine Design, Eurasia
Publishing House, New Delhi.
4. Sharma, C.S. and Purohit Kamalesh, Design of Machine Elements, Prentice
Hall of India, New Delhi, 2003.
... for shaft
For the design of shaft following two methods are adopted,
Design based on Strength
In this method, design is carried out so that stress at any location of th...
... Summary of this Lesson
Different types of loading and criterion for design of machine parts
subjected to static loading based on different failure theories have been
demonstrated. Development of ...
based on a particular failure criterion. Theories of failure are essentially a set of
failure criteria developed for the ease of design.
In machine design an element...
... Design of machine elements by M.F.Spotts, Prentice hall of India,1991.
2) Machine design- an integrated approach by Robert L. Norton, Pearson
Education Ltd, 2001.
3) A textbook of machine design ...
S.K.Kataria and sons, 1998.
4) Mechanical engineering design by Joseph E. Shigley, McGraw Hill,
1986.
5) Fundamentals of machine component design, 3
rd
edition, b...
... junctions
we ld
weld
9.2.2.4F- Method of construction of multilayered cylinder
3. Autofrettage
In some applications of thick cylinders such as gun barrels no inelastic
deformation ... find the radial displacements of the cylinder walls at the
contact we consider that
(
r
u1
rE
θθ
)
ε
== σ−νσ. This gives the radial
displacement of the inner wall of the...
... Discuss ‘factor of safety ‘ in view of the reliability in machine design.
A.4: Reliability of a designed machine is concerned with the proper functioning
of the elements and the machine as a ...
Q.1: Define machine design.
A.1: A machine is a combination of several machine elements arranged to
work together as a whole to accomplish specific purposes. Machine d...
...
Module
1
Fundamentals of
machine design
Version 2 ME, IIT Kharagpur
2a
σ
ε
(b) Plasticity- This is associated with the permanent deformation of material
when the stress ... composition of 88% Cu, 10% Sn and 2% Zn. Brass is a
Cu-Zn alloy with the typical composition of red brass of 85% Cu , 15% Zn.
Q.6: List at least five important non-metals commonly us...
... or
manufacture a product range. The range of operational speeds of a
machine or the range of powers of a typical machine may be also as per a
series of preferred numbers.
Version 2 ... Kamalesh, Design of Machine Elements,
Prentice Hall of India, New Delhi, 2003.
4. Chapman, W.A.J., Workshop Technology (part 2), ELBS, 4
th
edition, 1975
5. Maitra, G.M., Ha...