Tài liệu Lab 5 2 6 Managing Configuration Files with TFTP docx

... mask all addressesRouter 1 GAD 1 92. 168 .14.1 NA 1 92. 168 . 15. 1 NA 1 92. 168 .13.1 25 5 . 25 5 . 25 5 .0 2 - 5 CCNA 2: Routers and Routing Basics v 3.0 - Lab 5. 2. 6 Copyright  20 03, Cisco Systems, Inc. Step ... 1 - 5 CCNA 2: Routers and Routing Basics v 3.0 - Lab 5. 2. 6 Copyright  20 03, Cisco Systems, Inc. Lab 5. 2. 6 Managing Configuration Files with TFTP Objective ... configuration errors and re-verify. Step 2 Configure the workstation a. The configuration for the host connected to the Gadsden Router is: IP Address 1 92. 168 .14 .2 IP subnet mask 25 5 . 25 5 . 25 5 .0...

... - 5 CCNA 2: Routers and Routing Basics v 3.0 - Lab 5. 2. 3 Copyright  20 03, Cisco Systems, Inc. Lab 5. 2. 3 Managing Configuration Files with TFTP Objective • Backup a copy of a router configuration ... Configure the workstation a. The configuration for the host connected to the Gadsden Router is: IP Address 1 92. 168 .14 .2 IP subnet mask 25 5 . 25 5 . 25 5 .0 Default gateway 1 92. 168 .14.1 Step 3 Login to ... [running-config]? [Enter] Accessing tftp: //1 92. 168 .14 .2/ startup-config Loading startup-config from 1 92. 168 .14 .2 (via FastEthernet0): ! [OK - 66 7 bytes] 66 7 bytes copied in 9 .58 4 secs (70 bytes/sec)...

... addresses Router 1 GAD 1 92. 168 .14.1 25 5 . 25 5 . 25 5 .0 2 - 7 CCNA 2: Routers and Routing Basics v 3.0 - Lab 5. 2. 5a Copyright  20 03, Cisco Systems, Inc. a. The configuration for the host connected ... configuration for the host connected to the Gadsden Router is: IP Address 1 92. 168 .14 .2 IP subnet mask 25 5 . 25 5 . 25 5 .0 Default gateway 1 92. 168 .14.1 Step 3 Login to the router in user mode a. Connect to ... Sep 16 14:10:08 20 02: Receiving ‘c1700-y-mz. 122 -11.T.bin’ in binary mode Mon Sep 16 14:11:14 20 02: Successful. 4 - 7 CCNA 2: Routers and Routing Basics v 3.0 - Lab 5. 2. 5a Copyright  20 03,...

... Router(config)#config-register 0x21 02 Router(config)#exit Router#show flash System flash directory: File Length Name/status 1 428 464 8 c1700-y-mz. 122 -11.T.bin [ 42 854 52 bytes used, 124 91 764 available, 167 7 721 6 total] ... 1 721 (MPC 860 P) processor (revision 0x100) with 29 492K/ 327 6K bytes of memory Processor board ID FOC 063 80F 95 (3103 823 61 9), with hardware revision 0000 MPC 860 P processor: part number 5, mask 2 ... rate: 0 = 960 0, 1 = 4800, 2 = 120 0, 3 = 24 00 4 = 1 920 0, 5 = 38400, 6 = 57 60 0, 7 = 1 1 52 00 [0]: 7 change the boot characteristics? y/n [n]: [Enter] Configuration Summary (Virtual Configuration...

... passwordEnable/VTY/Console passwords Gadsden 1 72. 16. 0.1 25 5 . 25 5 .0.0 Cisco1 3 - 5 CCNA 2: Routers and Routing Basics v 3.0 - Lab 3.1 .6 Copyright  20 03, Cisco Systems, Inc. b. To change information, ... GAD(config-if)#ip address 1 92. 168 .14.1 25 5 . 25 5 . 25 5 .0 GAD(config-if)#no shutdown GAD(config-if)#description Connection to the host GAD(config-if)#exit GAD(config)#exit Note: Once interface configuration ... 1 - 5 CCNA 2: Routers and Routing Basics v 3.0 - Lab 3.1 .6 Copyright  20 03, Cisco Systems, Inc. Lab 3.1 .6 Making Configuration Changes Objective •...

... passwordEnable/VTY/Console passwords GAD 1 92. 168 .14.1 25 5 . 25 5 . 25 5 .0 class cisco Objective • Configure some basic router settings. • Bring interfaces up and down. • Make changes to the router configuration. Background/Preparation ... GAD(config-if)#ip address 1 92. 168 .14.1 25 5 . 25 5 . 25 5 .0 GAD(config-if)#no shutdown GAD(config-if)#description Connection to the host GAD(config-if)#exit GAD(config)#exit Note: Once interface configuration ... passwordEnable/VTY/Console passwords Gadsden 1 72. 16. 0.1 25 5 . 25 5 .0.0 Cisco1 b. To change information, go to the proper command mode and retype the command with the new information. To remove an old...

... 800 series routers • 160 0 series routers • 1700 series routers • 25 0 0 series routers • 26 00 series routers 2 - 5 CCNA 4: WAN Technologies v 3.0 - Lab 5. 2. 1 Copyright  20 03, Cisco Systems, ... 1 - 5 CCNA 4: WAN Technologies v 3.0 - Lab 5. 2. 1 Copyright  20 03, Cisco Systems, Inc. Lab 5. 2. 1 Configuring Frame Relay Objective • Configure ... the end of the lab to correctly identify the interface identifiers to be used based on the equipment in the lab. The configuration output used in this lab is produced from 1 721 series routers....