... used to configure IPX routing are ipx routing,
ipx maximum-paths, and ipx network.
• Subinterfaces allow a single interface to support multiple logical networks and enable
multiple encapsulations ... novell-ether
RouterA(config-if)#exit
RouterA(config)#exit
RouterA#show ipx interface
Troubleshooting IPX Routing
The following commands can be used to troubleshoot IPX routing:
• debug ipx routi...
... Host B.
To do this, Host A builds an IP header with a source IP address of 10.1.1.100 (its own IP
address) and a destination IP address of 10.1.2.100 (the IP address of Host B). This
allows ...
functionality and increased security of RIPv2, if you need to use RIP you should only use
RIPv2.
N
ote
RFC 1058 defines RIPv1. RFC 2453 defines RIPv2.
Open Shortest Path First
Op...
...
IP centrex sẽ thiết lập tất cả các văn phòng chi nhánh thành một mạng riêng của
doanh nghiệp mình đồng thời có thể sử dụng các dịch vụ, các ứng dụng mới, linh
hoạt trên nền IP.
Sử dụng IP ... thuê bao IP Centrex của công ty khác (Khác BG) : 9 8xxxxxx.
- Đến PSTN: 9 0 AC xxxxxxx
Sơ đồ cuộc gọi các thuê bao IP centrex trực tiếp
b. Khách hàng sử dụng thông qua tổng đài IP PB...