... 2 种连接类型: 1.access links: 指的是只属于一个 VLAN,且仅向该 VLAN 转发数据帧的端口,也叫做 native VLAN.switches 把帧发送到 access-link 设备之前,移去任何的 VLAN 信息.而且 access-link 设备不能与 VLAN 外通信,除非数据包被路由 2.trunk links: 指的是能够转发多个不同 VLAN ... 的这样配置,如下: 2600Router(config)#int f0/0.1 2600Router(config-subif)#encapsulation dot1q [vlan#] Configuring VTP 默认下,1900 和 2950 都被配置成 VTP 服务器模式,配置 VTP,先配置 VTP 域名,还有密码,是否pruning 等. 1900 下,在全局配置模式下使用 ... Trunkrouter(config-if)#int f0/0.1 Trunkrouter(config-subif)#ip address 172.16.10.1 255.255.255.0 Configuring IP routing on a LAN subinterface is only allowed if that subinterface is already configured...