0
  1. Trang chủ >
  2. Kỹ Thuật - Công Nghệ >
  3. Hóa học - Dầu khí >

Microstrip bộ lọc cho các ứng dụng lò vi sóng RF (P4)

Microstrip bộ lọc cho các ứng dụng lò vi sóng RF (P4)

Microstrip bộ lọc cho các ứng dụng vi sóng RF (P4)

... here for easy reference. 4.1 MICROSTRIP LINES 4.1.1 Microstrip Structure The general structure of a microstrip is illustrated in Figure 4.1. A conducting strip (microstrip line) with a width ... frequency of a microstrip line. 4.2 COUPLED LINES Coupled microstrip lines are widely used for implementing microstrip filters. Figure 4.2 illustrates the cross section of a pair of coupled microstrip ... section, some typical microstrip discontinuities and components that are of- ten encountered in microstrip filter designs are described. 4.3.1 Microstrip Discontinuities Microstrip discontinuities...
  • 31
  • 486
  • 0
Microstrip bộ lọc cho các ứng dụng lò vi sóng RF (P1)

Microstrip bộ lọc cho các ứng dụng vi sóng RF (P1)

... spectrum is the visible optical spectrum, the ultraviolet spectrum, and x-rays. Below the microwave frequency spectrum is the radio frequency (RF) spectrum. The frequency boundary between RF and mi- ... factors of filter elements on filter performance are also discussed. Chapter 4 summarizes basic concepts and design equations for microstrip lines, coupled microstrip lines, and discontinuities, ... typical microstrip highpass and bandstop filters. These include quasilumped element and optimum distributed highpass filters, narrow- band and wide-band bandstop filters, as well as filters for RF chokes....
  • 5
  • 649
  • 1
Microstrip bộ lọc cho các ứng dụng lò vi sóng RF (P2)

Microstrip bộ lọc cho các ứng dụng vi sóng RF (P2)

... building elements in many areas of RF/ microwave en- gineering. Such networks are used to select/reject or separate/combine signals at different frequencies in a host of RF/ microwave systems and equipment. ... chapter to describe various network concepts and provide equations that are useful for the analysis of filter networks. 2.1 NETWORK VARIABLES Most RF/ microwave filters and filter components can be ... v 1 (t) = |V 1 |cos( ␻ t + ␾ ) = Re(|V 1 |e j( ␻ t+ ␾ ) ) = Re(V 1 e j ␻ t ) (2.2) 7 Microstrip Filters for RF/ Microwave Applications. Jia-Sheng Hong, M. J. Lancaster Copyright © 2001 John Wiley...
  • 22
  • 428
  • 0
Microstrip bộ lọc cho các ứng dụng lò vi sóng RF (P3)

Microstrip bộ lọc cho các ứng dụng vi sóng RF (P3)

... describes basic concepts and theories that form the foundation for de- sign of general RF/ microwave filters, including microstrip filters. The topics will cover filter transfer functions, lowpass prototype ... bandpass, and bandstop filters will be discussed later on. 1 ᎏᎏ 1 + ␧ 2 F n 2 (⍀) 29 Microstrip Filters for RF/ Microwave Applications. Jia-Sheng Hong, M. J. Lancaster Copyright © 2001 John Wiley ... a 7-pole (n = 7) Butterworth prototype should be chosen. 3.2.2 Chebyshev Lowpass Prototype Filters For Chebyshev lowpass prototype filters having a transfer function given in (3.9) with a passband...
  • 48
  • 360
  • 0
Microstrip bộ lọc cho các ứng dụng lò vi sóng RF (P5)

Microstrip bộ lọc cho các ứng dụng vi sóng RF (P5)

... Yndenotes the sin-gle microstrip characteristic impedance of the input/output resonator.This type of microstrip bandpass filter is compact, but requires use of grounding microstrip resonators, ... the microstrip is not a pure TEM transmission line.For demonstration, we also let the microstrip resonators be ␭g0/4 long and requireno capacitive loading for this filter design. The microstrip ... dB ischosen. The lowpass prototype parameters, given for a normalized lowpass cutofffrequency ⍀c= 1, are g0= g6= 1.0, g1= g5= 1.1468, g2= g4= 1.3712, and g3=1.9750. Having obtained...
  • 51
  • 670
  • 1
Microstrip bộ lọc cho các ứng dụng lò vi sóng RF (P6)

Microstrip bộ lọc cho các ứng dụng vi sóng RF (P6)

... 6006) having a relative dielectric constant of 6.15and thickness of 1.27 mm is chosen for this microstrip filter realization. Using the microstrip design equations given in Chapter 4, the microstrip ... FILTERS1896.56.51.1wi=0.30.3Port 1 (RF Input)Port 2 (RF Output)Port 3(DC Bias) Unit: mmr=5.0oABα=90o(a)(b)FIGURE 6.15 (a) A microstrip bias T incorporating a bandstop (pseudolowpass) filter for RF choke.(b) ... active RF components in such a way that the RF be-havior is not affected at all by the dc connection. Referring to Figure 6.15(a), theconnection of the bandstop filter should not affect the RF...
  • 30
  • 444
  • 0
Microstrip bộ lọc cho các ứng dụng lò vi sóng RF (P7)

Microstrip bộ lọc cho các ứng dụng vi sóng RF (P7)

... ability to effectively improve filter selectivity. Therefore, it does notconstitute a particularly attractive choice for achieving frequency selectivity. Never-theless, it may be of interest ... ofconductivity ␴yields a surface impedance given byZs= = Ί๶(7.4)where Etand Htare the tangential electric and magnetic fields at the surface. Thisdefinition of the surface impedance ... perpendicular tothe c-axis (crystal axis) because of anisotropy.7.1.7 HTS Microstrip FiltersHTS microstrip filters are simply microstrip filters using HTS thin films instead ofconventional conductor...
  • 44
  • 636
  • 0
Tài liệu Microstrip bộ lọc cho các ứng dụng lò vi sóng RF (P8) doc

Tài liệu Microstrip bộ lọc cho các ứng dụng vi sóng RF (P8) doc

... external quality factors of mi-crowave coupling structures from EM simulations.235 Microstrip Filters for RF/ Microwave Applications. Jia-Sheng Hong, M. J. LancasterCopyright © 2001 John Wiley ... effect if their signs are opposite. Obviously, the direct evaluation of the cou-pling coefficient from (8.31) requires knowledge of the field distributions andperformance of the space integrals. ... input/output (I/O) coupling structures for coupled microstrip resonatorfilters, namely the tapped line and the coupled line structures, are shown with the microstrip open-loop resonator, though other...
  • 38
  • 555
  • 2
Tài liệu Microstrip bộ lọc cho các ứng dụng lò vi sóng RF (P9) doc

Tài liệu Microstrip bộ lọc cho các ứng dụng vi sóng RF (P9) doc

... described inSection 10.1 is chosen as an initial design. The attenuation poles at the normalizedlowpass frequencies are also chosen as ⍀ = ±1.5 to meet the selectivity. The initialvalues for ... Schematic circuit for the edge-coupled microstrip bandpass filter for CAD.L4 = sin–1΂Ί๶๶๶΃(9.39)where ␭gand Zrare the microstrip guided wavelength and the microstrip character-istic impedance ... 9.22(b).Examples of CAD of microstrip filters involving EM simulation have beendemonstrated in [53] and [54]. A typical example described in [53] is the design of afive-pole microstrip interdigital...
  • 42
  • 695
  • 3
Tài liệu Microstrip bộ lọc cho các ứng dụng lò vi sóng RF (P10) pptx

Tài liệu Microstrip bộ lọc cho các ứng dụng vi sóng RF (P10) pptx

... 10Advanced RF/ Microwave FiltersThere have been increasing demands for advanced RF/ microwave filters other thanconventional Chebyshev filters in order to meet stringent requirements from RF/ mi-crowave ... CharacteristicsThe filter having only one pair of transmission zeros (or attenuation poles) at finitefrequencies gives much improved skirt selectivity, making it a viable intermediatebetween ... fabricated filter using copper microstrip. The size of the filter amounts to324ADVANCED RF/ MICROWAVE FILTERSFIGURE 10.6 (a) Photograph of the fabricated eight-pole microstrip bandpass filter designed...
  • 63
  • 533
  • 1

Xem thêm

Từ khóa: chế tạo các robot thông minh phục vụ cho các ứng dụng quan trọng nhóm sản phẩm recác ứng dụng của vi điều khiểncác ứng dụng của vi điều khiển 8051nghiên cứu framework quản lý người dùng và tài nguyên cho các ứng dụng webcac giao thuc cho cac ung dung tuong tac thoi gian thucBáo cáo quy trình mua hàng CT CP Công Nghệ NPVchuyên đề điện xoay chiều theo dạngNghiên cứu sự hình thành lớp bảo vệ và khả năng chống ăn mòn của thép bền thời tiết trong điều kiện khí hậu nhiệt đới việt namNghiên cứu vật liệu biến hóa (metamaterials) hấp thụ sóng điện tử ở vùng tần số THzđề thi thử THPTQG 2019 toán THPT chuyên thái bình lần 2 có lời giảiBiện pháp quản lý hoạt động dạy hát xoan trong trường trung học cơ sở huyện lâm thao, phú thọGiáo án Sinh học 11 bài 13: Thực hành phát hiện diệp lục và carôtenôitĐỒ ÁN NGHIÊN CỨU CÔNG NGHỆ KẾT NỐI VÔ TUYẾN CỰ LY XA, CÔNG SUẤT THẤP LPWANTrả hồ sơ điều tra bổ sung đối với các tội xâm phạm sở hữu có tính chất chiếm đoạt theo pháp luật Tố tụng hình sự Việt Nam từ thực tiễn thành phố Hồ Chí Minh (Luận văn thạc sĩ)Nghiên cứu tổng hợp các oxit hỗn hợp kích thƣớc nanomet ce 0 75 zr0 25o2 , ce 0 5 zr0 5o2 và khảo sát hoạt tính quang xúc tác của chúngNghiên cứu khả năng đo năng lượng điện bằng hệ thu thập dữ liệu 16 kênh DEWE 5000Thiết kế và chế tạo mô hình biến tần (inverter) cho máy điều hòa không khíSở hữu ruộng đất và kinh tế nông nghiệp châu ôn (lạng sơn) nửa đầu thế kỷ XIXBT Tieng anh 6 UNIT 2Giáo án Sinh học 11 bài 15: Tiêu hóa ở động vậtchuong 1 tong quan quan tri rui roGiáo án Sinh học 11 bài 14: Thực hành phát hiện hô hấp ở thực vậtTrách nhiệm của người sử dụng lao động đối với lao động nữ theo pháp luật lao động Việt Nam từ thực tiễn các khu công nghiệp tại thành phố Hồ Chí Minh (Luận văn thạc sĩ)Đổi mới quản lý tài chính trong hoạt động khoa học xã hội trường hợp viện hàn lâm khoa học xã hội việt namTÁI CHẾ NHỰA VÀ QUẢN LÝ CHẤT THẢI Ở HOA KỲ