Catalyst 2900 Password Recovery
Catalyst 2900 Password Recovery
... 3.3.4.2: Catalyst 2900 Password Recovery
ALSwitch
2900XL
10.1.1.251/24
Console Cable
Workstation
10.1.1.10/24
Native
VLAN1
Objective:
Regain control of a Cisco Catalyst 2900 Ethernet ... documentation containing the
passwords. Perform password recovery on the Catalyst 2900 - change the user exec password
to “cisco” and the privileged exec mode password to...
Lab 3.3.4.1: Catalyst 4000 Password Recovery
... documentation
containing the passwords. Perform password recovery on the Catalyst 4000 - change the user
exec password to “cisco” and the privileged exec mode password to “class”.
Lab Tasks: ...
DLSwitch1> (enable) set password
Enter old password: (Because you do not currently have a password, just hit enter)
Enter new password:
Retype new password:
Password chan...
Tài liệu Lab 6.2.8 Password Recovery Procedure on a Catalyst 2900 Series Switches ppt
...
Lab 6.2.8 Password Recovery Procedure on a Catalyst 2900 Series Switches
Objective
• Create and verify a basic switch configuration verify it.
• Change passwords to the password recovery procedure ... Center (TAC)
for password recovery.
Note: This section is also applicable for those Catalyst 2800 switches that do not have the Mode
button in their front panel.
To reco...
Tài liệu Lab 6.2.8 Password Recovery Procedure on a Catalyst 2900 Series Switches docx
...
Lab 6.2.8 Password Recovery Procedure on a Catalyst 2900 Series Switches
Objective
• Create and verify a basic switch configuration verify it.
• Change passwords to the password recovery procedure ... document, and contact the Cisco Technical Assistance Center (TAC) for
password recovery.
Clearing the Password
To clear your password, follow the steps below:
1. Power-c...
Lab 6.2.9 Firmware Upgrade of a Catalyst 2900 Series Switch
...
Lab 6.2.9 Firmware Upgrade of a Catalyst 2900 Series Switch
Objective
• Create a basic switch configuration verify it.
• Upgrade ... Connection on-line software center. It has been
determined that this file is the latest update for the Catalyst 2950. This has the same file name
stem as the current image. However, for the purpose ... Cisco Systems, Inc.
Step 1 Configure the swi...
Catalyst 2900 TFTP Configuration Files
... just taken a job at a company that uses Catalyst 2900 Ethernet switches in their IDFs.
You want to save a copy of the configuration file from your Catalyst 2900 switch to a TFTP server
for safekeeping. ... Lab 3.3.7.2: Catalyst 2900 TFTP Configuration Files
ALSwitch
2900XL
10.1.1.251/24
Console Cable
Workstation
10.1.1.10/24
TFTP Server
Native
VLAN1
...
ALSwitch(config)#ena...
Tài liệu QUY TRÌNH KHÔI PHỤC PASSWORD (password recovery) pptx
... new privileged password and change other lost passwords as may be necessary.
router#config term
router(config)#enable secret newpassword
router(config)#enable password newpassword
router(config)#line ...
router(config-line)#login
router(config-line) #password newpassword
router(config)#line aux 0
router(config-line)#login
router(config-line) #password newpassword
rout...
Tài liệu Catalyst 2900 Series XL and Catalyst 3500 Series XL Software Configuration Guide doc
... Administration
Default Settings
4-16
Catalyst 2900 Series XL and Catalyst 3500 Series XL Software Configuration Guide
78-6511-05
CHAPTER
5-1
Catalyst 2900 Series XL and Catalyst 3500 Series XL Software ... the
Catalyst 2900 XL and Catalyst 3500 XL switches, except for the access
class 199 that is created when a device is configured as the command switch.
5-3
Catalyst...
Tài liệu Lab 5.2.6a Password Recovery Procedures pdf
...
Attempt to logon to the router using the enable password cisco. The output should look like the
following:
Router>enable
Password:
Password:
Password:
% Bad secrets
Router>
Step ... 2003, Cisco Systems, Inc.
Lab 5.2.6a Password Recovery Procedures
Objective
• Gain access to a router with an unknown privileged mode (enable) password.
Background/Preparation
This...
Tài liệu Lab 5.2.7 Password Recovery Procedures pptx
...
Attempt to logon to the router using the enable password cisco. The output should look like the
following:
Router>enable
Password:
Password:
Password:
% Bad secrets
Router>
Step ... 2003, Cisco Systems, Inc.
Lab 5.2.7 Password Recovery Procedures
Objective
• Gain access to a router with an unknown privileged mode (enable) password.
Background/Preparat...