Lab 6 2 9 Firmware Upgrade of a Catalyst 2900 Series Switch

... Lab 6. 2. 8 Password Recovery Procedure on a Catalyst 29 00 Series Switches Objective • Create and verify a basic switch configuration verify it. • Change passwords to the password recovery ... Version 12. 1(11r)EA1, RELEASE SOFTWARE (fc1) Compiled Mon 22 -Jul- 02 18:57 by antonino WS-C 295 0 -24 starting Base ethernet MAC Address: 00: 0a: b7: 72: 2b:40 Xmodem file system is available. ... performed. Background / Preparation Cable a network similar to the one in the diagram. The configuration output used in this lab is produced from a 29 50 series switch. Any other switch used may produce...

... 25 5 .25 5 .25 5.0Router 2 GAD 1 92 . 168 . 16. 1 DTE 1 92 . 168 .15 .2 DTE 1 92 . 168 .13 .2 255 .25 5 .25 5.0Objective • Configure Load balance across multiple paths. • Observe the load balancing process. Background/Preparation ... GAD class cisco RIP 1 92 . 168 .14.0 1 92 . 168 .15.0 1 92 . 168 .13.0 Router 2 BHM class cisco RIP 1 92 . 168 .15.0 1 92 . 168 . 16. 0 1 92 . 168 .13.0 Router designation IP host name FastEthernet 0 address ... Interface type Serial 0 Serial 0 address Interface type Serial 1 Serial 1 address Subnet maskall addressesRouter 1 BHM 1 92 . 168 .14.1 DCE 1 92 . 168 .15.1 DCE 1 92 . 168 .13.1 25 5 .25 5 .25 5.0Router...

... Lab 10 .2. 9 Small Router Purchase Objective The purpose of this lab is to introduce the variety and prices of network components in the market. This lab will look specifically at small ... users. In talking to the executives and support personnel, it has become apparent that some of the personnel live in areas that do not support DSL or cable service. Models that might also support ... with cable and DSL connections from their homes. They have requested a proposal for purchasing small routers for this purpose. The assignment is to research at least two different solutions and...

... - 2 CCNA 1: Networking Basics v 3.0 – Lab1 0 .2. 9 Copyright  20 03, Cisco Systems, Inc. Lab 10 .2. 9 Small Router Purchase Objective The purpose of this lab is to introduce the variety ... They have requested a proposal for purchasing small routers for this purpose. The assignment is to research at least two different solutions and develop a proposal. The project details are as ... become apparent that some of the personnel live in areas that do not support DSL or cable service. Models that might also support Integrated Services Digital Network (ISDN) connections must now also...

... configuration of a 29 00 series switch. Background/Preparation Cable a network similar to the one in the diagram. The configuration output used in this lab is produced from a 29 50 series switch. Any ... procedure for clearing out previous configurations and starting with an unconfigured switch. Instructions are provided for the 29 00, 29 50, and 190 0 Series switches. 29 00 and 29 50 Series Switches ...  20 03, Cisco Systems, Inc. Erasing and Reloading the Switch For the majority of the labs in CCNA 3 and CCNA 4 it is necessary to start with an unconfigured switch. Use of a switch with an...

... default management VLAN to 1 92 . 168 .1.1 as follows: ALSwitch(config)#ip default-gateway 1 92 . 168 .1.1 ALSwitch(config)#exit 190 0: ALSwitch(config)#ip default-gateway 1 92 . 168 .1.1 ALSwitch(config)#exit ... address 1 92 . 168 .1 .2 255 .25 5 .25 5.0 ALSwitch(config-if)#exit 190 0: ALSwitch(config)#ip address 1 92 . 168 .1 .2 255 .25 5 .25 5.0 ALSwitch(config)#exit b. Set the default gateway for the switch and ... CCNA 3: Switching Basics and Intermediate Routing v 3.0 - Lab 6. 2. 2 Copyright  20 03, Cisco Systems, Inc. Lab 6. 2. 2 Basic Switch Configuration Objective • Configure a switch with a name and...