guide for consolidation of concrete
Tài liệu Uniform Audit and Accounting Guide: For Audits of Transportation Consultants’ Indirect Cost Rates pptx
...
performance measures.
The following page provides a summary matrix of applicable standards for audits of Schedules of Indirect
Costs.
AASHTO
Uniform Audit and Accounting Guide
for Transportation ...
and Accounting Guide
For Audits of Transportation Consultants’
Indirect Cost Rates
Prepared by the American Association of State Hig...
the chemical laboratory its design and operation a practical guide for planners of industrial, medical, or educational facilities
... Ridge,
N_
JersBY,
U.s .A.
THE CHEMICAL
LABORATORY:
Its Design And Operation
A Practical Guide for
Planners of
Industrial, Medical, or
Education Facilities
Sigurd J. Rosenlund
William Andrew Inc.
Laboratory
Layout
25
given ... local planning authorities must be obtained before further
planning can take place.
THE CHEMICAL LABORATORY:
ITS DESIGN...
considerations for design of concrete structures subjected to fatigue loading
... intended to provide information that will
serve as a guide for design for concrete structures subjected
to fatigue loading.
ASTM 722-90
However, this report does not contain the type of detailed
design ... and
concrete subjected to flexure and axial force and for shear
reinforcement. The shear fatigue capacity of concrete beams
without shear reinforcement...
guide for consolidation of concrete
... and wall forms: Centrifu-
gal force = 0.5 [(mass of form) + 0.2 (concrete mass)].
2. For stiff mixtures in pipe and other rigid forms: Centrif-
ugal force = 1.5 [(weight of form) + 0.2 (concrete ... consolidation of concrete by permitting place-
ment with less consolidation effort. Refer to reports of ACI
Committee 226 for more information regarding these mate-
rials. The...
guide for use of normal weight and heavyweight aggregates in concrete
... 221R-1
This guide presents information on selection and use of normal weight and
heavyweight aggregates in concrete. The selection and use of aggregates in
concrete should be based ... routine inspection of the material source
and of the aggregate processing plant and handling system,
all the way through to the point of batching; routine sam-
pling...
practices for evaluation of concrete in existing massive structures for service conditions
... tools for those
evaluating concrete in existing massive structures.
1.1-Scope
This report focuses on practices used to evaluate
concrete in existing massive structures. Design consid-
erations, evaluation ... for Determination of Strength
of Concrete
437R
Strength Evaluation of Existing Concrete Buil-
dings
504R
Guide to Sealing Joints in Concrete...
guide for submittal of concrete proportions
... all of these aggregate properties influ-
ence the proportioning of the concrete mixture, they should be
submitted to support the proposed mixture proportions.
GUIDE FOR SUBMITTAL OF CONCRETE PROPORTIONS ... selection of the appropriate
f
cr
′ . Submittal of concrete mixture proportions should con-
tain the method used to select f
cr
′ for each class of concre...
nondestructive test methods for evaluation of concrete in structures
... despite
the lack of testing standards for many of the methods. The
development of testing standards is critical for proper appli-
cation and expanded use of NDT methods for evaluation of
concrete constructions.
Traditionally, ... applications
Nondestructive test methods are increasingly applied for
the investigation of concrete structures. This increase in...
guide for design of foundations and shoulders for concrete pavements
... 325.3R-85
(Revised 1987)
Guide for Design of Foundations and
Shoulders for Concrete Pavements
Reported by ACI Committee 325
Methods are suggested for material selection, moisture control, and
compaction ... Tests of
Soils and Flexible Pavement Com-
ponents, for Use in Evaluation and
Design of Airport and Highway
Pavements
Test Method for Density of...
guide for evaluation of concrete structures prior to rehabilitation
...
l
0
00
STRUCTURAL PERFORMACE
l
0
l
UNIFORMITY OF CONCRETE
0 0
l
.
l
.
EVALUATION OF STRUCTURES PRIOR TO REHABILITATION
Table 6.2 -Evaluation of properties of reinforcing steel
PROPERTIES ... used for
evaluation of concrete structures prior to rehabilitation.
The procedures should be used as a guide and are not in-
tended to replace judgment by...
guide to consolidation of concrete in congested areas
... placement of
concrete in heavily reinforced sections can also be im-
proved by bundling reinforcing bars into groups of two
or three bars to increase spacing. When encasing per-
manent steel plate liners ... spacing of
6 ft (1.8 m). The side ports are used to lower the vibra-
tors into the form and to observe the concrete placing
within the form. This is necessary to insur...
guide for design of jointed concrete pavements
... Specification for Preformed Polychloroprene Elas-
tomeric Joint Seals for Concrete Pavements
D 2835 Standard Specification for Lubricant for Installa-
tion of Preformed Compression Seals in Concrete
Pavements
D ... Construction of Concrete Pavements
and Concrete Bases
330R Guide for Design and Construction of Concrete
Parking Lots
504R Guide to Sealing Jo...
guide for precast cellular concrete floor, roof, and wall units
... for Concrete Reinforcement
A 615 Standard Specification for Deformed and Plain Billet-
Steel Bars for Concrete Reinforcement
C 33 Standard Specifications for Concrete Aggregates
C 144 Standard ... portland cement slurry or hot dipped zinc coating.
CHAPTER 3 CONCRETE PROPERTIES
3.1—Compressive strength
Low-density concrete used in precast reinforced cellular
concrete...