Materials Handbook 15th 2010 Part 1 pptx

... lb/in 3 (11 90 kg/m 3 ), light transmission is 92 to 93%, refractive index is 1. 49 to 1. 51, and haze is 0.3 to 0.5%. Tensile and flexural strengths are 11 ,000 to 11 ,500 lb/in 2 (76 to 79 MPa) and 16 ,10 0 ... to 79 MPa) and 16 ,10 0 to 18 ,10 0 lb/in 2 (11 1 to 12 5 MPa), respectively; ultimate elongation is 4.3 to 8.8%; the flexural modulus is 470,000 to 480,000 lb/in 2 (3240 t...

Ngày tải lên: 12/08/2014, 03:20

... different types of wine, from 0 .1 to 1. 0 lb/gal (0. 01 to 0 .12 g/cm 3 ) of cream of tartar. From wines clarified by refrigeration, as much as 1 to 3 lb/gal (0 .12 to 0.36 g/cm 3 ) of tartrate crystallizes ... woods vary in tensile strength from 11 ,000 to 17 ,000 lb/in 2 (76 to 11 7 MPa). White ash has a compressive strength perpendicular to the grain of 2,250 lb/in 2 (15 .5 MPa)....

Ngày tải lên: 12/08/2014, 03:20

... usually of sulfur (0.08 to 0 .13 %), sulfur-phos- phorus combinations, and/or lead to improve machinability. They are AISI 11 08 to 11 51 for sulfur grades, and AISI 12 11 to 12 15 for phosphorus and sulfur ... yield strengths of 13 0,000 to 220,000 lb/in 2 (896 to 1, 517 MPa) but little duc- tility, 4 to 2% elongation, respectively. Low-carbon steels 10 18 to 10 25 in cold-drawn ba...

Ngày tải lên: 12/08/2014, 03:20

... content is in the 0.05 to 1% range. These alloys include L-605; S- 816 ; V-36; WI-52; X-40; J -16 50; Haynes 21 and 15 1; AiResist 13 , 213 , and 215 ; and MAR-M 302, 322, and 918 . Their 1, 000-h stress-rupture ... Ϫ2 21. 4°F ( 14 0°C), and boiling point 54.5°F (12 .5°C). The condensing pressure in refrigerators is 12 .4 lb (5.6 kg) at 6°F ( 14 °C), and the pressure of vaporization i...

Ngày tải lên: 12/08/2014, 03:20

... usual specific gravity is 1. 04 to 1. 12, and the melting point is up to 248°F (12 0°C). The average grade of dammar does not have a melting point much higher than 212 °F (10 0°C). Dammar is a spirit ... ft ( 61 m), with outside diameters from 0.060 to 0 .12 5 in (0 .15 2 to 0. 318 cm). The inside bore can be had in various diameters from 0.006 to 0.025 in (0. 015 to 0.064 cm) for the 0.06...

Ngày tải lên: 12/08/2014, 03:20

... temperatures of 11 3 to 2500°F (45 to 13 71 C). The Semalloy metals of Semi-Alloys Inc. cover a wide range of fusible alloys with various melting points. Semalloy 10 10 with a melting point of 11 7°F (47°C) ... bismuth, 25 lead, 12 .5 tin, and 12 .5 cadmium. It melts at 15 8°F (70°C). An early alloy for tube bending contains 50% bismuth, 16 .7 lead, 13 .3 tin, and 10 cadmium. It mel...

Ngày tải lên: 12/08/2014, 03:20

... drawing at 11 12°F (600°C). Iridium plating is used on molybdenum to protect against oxi- dation at very high temperatures. Above 11 12°F (600°C) iridium tar- nishes, and above 18 32°F (10 00°C) it ... Australian kangaroo, used chiefly for shoe uppers and gloves. The skins measure from 2 to 12 ft 2 (0 .19 to 1. 11 m 2 ) in area, and the small ones are known as wallaby. The fibers have a...

Ngày tải lên: 12/08/2014, 03:20

... expansion at 70 to 16 00°F ( 21 to 8 71 C) of 9 .1 ϫ 10 Ϫ6 /°F (16 .3 ϫ 10 Ϫ6 /K), and a melting range of 2300 to 2470°F (12 60 to 13 54°C). The alloy is widely used for gas-turbine parts and other applications ... these properties are 22,500 lb/in 2 (15 5 MPa), 16 ,000 lb/in 2 (11 0 MPa), 45%, and 18 .3 ϫ 10 6 lb/in 2 (12 6,000 MPa), respectively. The alloy has a den- sity of...

Ngày tải lên: 12/08/2014, 03:20

... contains an average of 23.5% arachi- donic acid, C 19 H 31 COOH; 16 .2 clupanodonic; 11 .5 linoleic; 17 .1 oleic; 15 palmitic; 10 .6 palmitoleic acid, C 15 H 29 COOH; 4 myristic; and 2 stearic acids. ... and freezing point 16 8°F ( 11 1°C). The condensing pressure at 86°F (30°C) is 18 .3 lb/in 2 (0 .13 MPa), and the net refrigerating effect of the liquid is 67.5 Btu/lb (15 7 kJ/k...

Ngày tải lên: 12/08/2014, 03:20

... have a tensile strength above 10 0,000 lb/in 2 (690 MPa) at 12 92°F (700°C), 70,000 lb/in 2 (483 MPa) at 18 32°F (10 00°C), and 40,000 lb/in 2 (276 MPa) at 219 2°F (12 00°C). Vanadium salts are used ... steels. SAE 614 5 steel, with 0 .18 % vanadium and 1 chromium, has a fine grain structure and is used for gears. It has a tensile strength of 11 6,000 to 292,000 lb/in 2 (800 to 2, 013...

Ngày tải lên: 12/08/2014, 03:20