Volume 17 - Nondestructive Evaluation and Quality Control Part 12 docx

... Hildebrand and K.A. Haines, Multiple-Wavelength and Multiple-Source Holography Applied to Contour Generation, J. Opt. Soc. Am., Vol 57 (No. 2), 1967, p a15 5-1 62 25. J.S. Zelenka and J.R. ... Proc. SPIE, Vol 398, p 2 2-2 9 17. R. Dandliker and R. Thalmann, Heterodyne and Quasi-Heterodyne Holographic Interferometry, Opt. Eng., Vol 24 (No. 5), 1985, p 82 4-8 31 Optical Holography ... hot and allowed to cool by natural convection. Fields u and v are the contour fringe displacements in the x- and y-directions, respectively. Fig. 5 Comparison between theoretical and experimental...

Volume 17 - Nondestructive Evaluation and Quality Control Part 7 docx

... for Nondestructive Testing, 1986 2. H.E. Bussey, Standards and Measurements of Microwave Surface Impedance, Skin Depth, Conductivity, and Q, IRE Trans. Instrum., Vol 1-9 , Sept 1960, p 171 -1 75 ... testpiece. A C-scan format also records time-of-flight data, which can be converted and displayed by image-processing equipment to provide an indication of flaw depth A-scan and B-scan data are ... of the rectangle. Near-field and far-field effects also occur when ultrasonic waves are reflected from interfaces. The reasons are similar to those for near-field and far-field effects for transducer...

Volume 17 - Nondestructive Evaluation and Quality Control Part 13 docx

... color and black -and- white images contain the same information, there are features that are much more obvious in color plots than in corresponding black -and- white plots, and vice versa. In particular, ... commonality, and/ or to combine images. For example, a video of a part can be taken, edge enhanced, boosted, ANDed with 128 added to 127 and scaled and registered with a radiograph or other image, and ... enhancement. Black -and- white images are shown in Fig. 6 and 7, and the color versions are shown in Fig. 6(c) and (d) in the article "Use of Color for NDE" in this Volume. Fig. 6...

Volume 17 - Nondestructive Evaluation and Quality Control Part 1 doc

... Properties and selection v. 2. Properties and selection nonferrous alloysand pure metals [etc.] v. 17. Nondestructiveevaluation and quality control. 1. Metals Handbooks, manuals, etc. I. ASM Handbook ... under what conditions, who will operate it, and so on. Every CMM offers trade-offs and its own cost-to-benefits ratio. The CMM that provides state-of-the-art measurement, for example, may not be ... two major roles: quality control and process control. In the area of quality control, CMMs can generally perform traditional final part inspection more accurately, more rapidly, and with greater...

Volume 17 - Nondestructive Evaluation and Quality Control Part 2 pps

... distinct areas: • Flaw detection and evaluation • Leak detection and evaluation • Metrology (measurement of dimension) and evaluation • Location determination and evaluation • Structure or microstructure ... Creep-Fatigue Damage in Pressure Parts of Long-Term Service-Exposed Thermal Power Plants, in Residual Life Assessment Nondestructive Examination and Nuclear Heat Exchanger Materials, PVP-Vol ... References 1. "Standard Practice for Production and Evaluation of Field Metallographic Replicas," E 51 2-8 7, Annual Book of ASTM Standards, American Society for Testing and Materials 2....

Volume 17 - Nondestructive Evaluation and Quality Control Part 3 pps

... Materials, Penetrant MIL-I-25105 Inspection Unit, Fluorescent Penetrant, Type MA-2 MIL-I-25106 Inspection Unit, Fluorescent Penetrant, Type MA-3 MIL-STD-271 (Ships) Nondestructive Testing ... government specifications MIL-STD-6866 Military Standard Inspection, Liquid Penetrant MIL-STD-410 Nondestructive Testing Personnel Qualifications & Certifications MIL-I-25135 Inspection Materials, ... inner surface for large-diameter and thick-wall parts. Large valve bodies and similar parts Good sensitivity to inner-surface discontinuities Same as for long tubular parts, above Direct...

Volume 17 - Nondestructive Evaluation and Quality Control Part 4 ppt

... Bearings," AMMRL CTR 7 7-1 3, Final Report, Contract Nos. DAAG4 6-7 4-C-0 012 and DAAG4 6-7 5-C-0001, U.S. Army Materials and Mechanics Research Center, March 1977 44. J.R. Barton and J. Lankford, "Magnetic ... Bearings," AMMRL CTR 7 7-1 3, Final Report, Contract Nos. DAAG4 6-7 4-C-0 012 and DAAG4 6-7 5-C-0001, U.S. Army Materials and Mechanics Research Center, March 1977 44. J.R. Barton and J. Lankford, "Magnetic ... Methods of Nondestructive Testing, Part 1, Br. J. NDT, Sept 1964, p 8 5- 93; Part 2, Dec 1964, p 10 9-1 22 12. F.W. Dunn, Magnetic Particle Inspection Fundamentals, Mater. Eval., Dec 1977, p 4 2-4 7...

Volume 17 - Nondestructive Evaluation and Quality Control Part 5 doc

... Nostrand, 1951 8. G.A. Matzkanin, R.E. Beissner, and C.M. Teller, "The Barkhausen Effect and Its Applications to Nondestructive Evaluation, " State of the Art Report, NTIAC-7 9- 2, Nondestructive ... Measuring Material Properties. Part II. Measurements of Residual and Applied Stress." Technical Report AFML-TR-6 6-7 6 (Part II), USAF Contract No. AF-33(615 )-5 068, Air Force Materials Laboratory, ... 1958 4. W.L. Rollwitz and A.W. Whitney, "Special Techniques for Measuring Material Properties," Technical Report ASD-TDR-6 4-1 23, USAF Contract No. AF-33(657 )-1 0326, Air Force Materials...

Volume 17 - Nondestructive Evaluation and Quality Control Part 6 doc

... the medium bands; and plastics and composite materials such as filament-wound glass, Kevlar, and honeycomb in the higher bands. References cited in this section 17. M.W. Standart, A.D. ... incident and reflected waves interfere and cause a standing wave. The standing wave wavelength and peak amplitude change along the standing wave pattern and are related to the velocity and attenuation ... 150 5.9 75 3.0 2. 0-4 .0 Coaxial cable 75 3.0 37 1.5 4. 0-8 .0 Coaxial cable 37 1.5 18 0.71 8. 0-1 2.4 Waveguide 34 1.3 17 0.67 12. 4-1 8.0 Waveguide 28 1.1 14 0.55 18. 0-2 6.0 Waveguide 19...

Volume 17 - Nondestructive Evaluation and Quality Control Part 9 pptx

... (1 MV) 5-9 0 -3 High-energy sources 2.0 MeV 5-2 50 -1 0 4.5 MeV 2 5-3 00 1-1 2 7.5 MeV 6 0-4 60 2 -1 8 20.0 MeV 7 5-6 10 3-2 4 R-Output of High-Energy Sources. The R-output of a pulsed x-ray generator ... x-ray machines to control the kilovolt and milliamp settings, the shutters, and x-ray on and off. It also interfaced with the isocon camera control unit to turn the camera beam on and off and ... 10 -3 lm/m2 (10 -4 ftc), and the isocon is useful to 1.076 × 10 -4 lm/m2 (10 -5 ftc). The isocon provides the best noise performance and resolution of all tubes for low-light levels and...

Xem thêm