Foseco Ferrous Foundryman''''''''s Handbook Part 11 pdf
Foseco Ferrous Foundryman''''s Handbook Part 11 pdf
... also be used.
240
Foseco Ferrous Foundryman’s Handbook
SEMCOPERM M66 has been developed for coating EPS patterns used for
making iron castings by the lost foam process. It is particularly suitable ... cast-in metal inserts
which form parts of castings.
CHILCOTE 4 is a refractory, self-drying dressing for external chills. It provides
258
Foseco Ferrous Foundryman’s Handbook
Figure...
Foseco Ferrous Foundryman''''s Handbook Part 13 pdf
... 1.25
Ni Al Bronze 0.50
Sn Bronze 0.75
300
Foseco Ferrous Foundryman’s Handbook
Non -ferrous castings
Table 19.3 gives a feeding distance factor for some of the non -ferrous alloys;
this factor is used ... variations from these conditions will result in other feeding distances.
312
Foseco Ferrous Foundryman’s Handbook
sleeves are particularly suitable for aluminium, copper-base a...
Foseco Ferrous Foundryman''''s Handbook Part 15 pdf
... 275
Stainless steel, 116
Starch additive for sand, 155
Steel castings, 108
carbon steel, 112
duplex steel, 117
low alloy steel, 112
high alloy steel, 114
hot tearing, 129
manganese steel, 114
physical ... remaining liquid of the section of
which it is a part. Where it resides in this remaining liquid depends
on the type of alloy.
350
Foseco Ferrous Foundryman’s Handbook
(5)...
Foseco Non-Ferrous Foundryman’s Handbook Part 1 pdf
... alloys
Die design
Process control 111
Modification of the diecasting process 113
Applications of diecastings 114
The diecasting foundry 114
Die coating 116
10 Low pressure and gravity diecasting ... cal/g°C = 1 kcal/kg°C = 4186.8 J/kg.K
1 Btu/lb°F = 4186.8 J/kg.K
1 Btu/h = 0.293071 W
Foseco Non -Ferrous
Foundryman’s Handbook
Eleventh edition
Revised and edited by
John R. Brow...
Foseco Non-Ferrous Foundryman’s Handbook Part 14 pdf
... <15 mm 15–40 mm >40 mm
83/3/9/5 118 0°C 114 0°C 110 0°C
85/5/5/5 1200 115 0 112 0
86/7/5/2 1200 116 0 112 0
88/10/2 1200 117 0 113 0
90/10 (P–bronze) 112 0 110 0 1030
Running and feeding
Methods best ... 104 124 84 104 104 124 84 104
11 114 136 92 114 114 136 92 114
12 124 148 100 124 124 148 100 124
13 135 161 109 135 135 161 109 135
14 145 173 117 145 145 173 117 14...
Foseco Non-Ferrous Foundryman’s Handbook Part 16 pdf
... 288 Foseco Non -Ferrous Foundryman’s Handbook
make cost analyses to quickly determine the most cost-effective feeding
system ... 286
application of sleeves, 280
Index 295
Pressure diecasting–Continued
semi-solid, 114
squeeze casting, 113
vacuum, 113
magnesium, 223
Properties of metals, 7
Radioactivity in zircon sand, 155
Raw ... pressure diecasting, 119
cores for, 121
die coating...
Foseco Ferrous Foundryman''''s Handbook Part 2 ppsx
... 11. 2 11. 9 12.5 13.0 13.4
Pearlitic flake or nodular 11. 1 11. 7 12.3 12.8 13.2
Ferritic malleable 12.0 12.5 12.9 13.3 13.7
Pearlitic malleable 11. 7 12.2 12.7 13.1 13.5
White iron 8.1 9.5 10.6 11. 6 ... liquid
C
Fe – G system Fe – Fe
3
C system
ABCD
(––) Fe–G 2.09 4.25 0.68 %C
115 4 115 4 739 °C
( ) Fe–Fe
3
C 2.12 4.31 6.68 0.76 %C
114 8 114 8 1226 727 °C
Table 2.1 Breakdown of ir...
Foseco Ferrous Foundryman''''s Handbook Part 3 docx
... be established by experience for a particular cupola operation, but the
following ‘Levi equation’ is a good starting guide.
58
Foseco Ferrous Foundryman’s Handbook
Charge materials
The maximum ... 100.00
5.0 39.0 no 1460 8.0 450 150 171 grey 11. 00 x
8.0 42.0 no 1500 4.0 1500 153 grey 11. 00
8.0 53.9
8.0 48.0 yes 1550 9.0 900 363 140
8.0 38.0 no 1490 7.0 110 0 115 grey 8.64 x
8.0 48...
Foseco Ferrous Foundryman''''s Handbook Part 4 pot
... 6.4
Structure of compacted graphite. (Courtesy SinterCast.)
CGI microstructure100 µ m
84
Foseco Ferrous Foundryman’s Handbook
Mechanical properties are measured on test pieces machined from
separately ... ends,
readily distinguished from true flake graphite (Fig. 6.4). Compacted graphite
74
Foseco Ferrous Foundryman’s Handbook
pocket. The ladle is filled with liquid iron, sealed a...
Foseco Ferrous Foundryman''''s Handbook Part 5 ppsx
... 2.5–3.6 2.0 2.0 4.5–7.0 7.0 11. 0 1.5 – 0.1 0.15
11 A 12%Cr 2.0–3.3 2.0 1.5 2.5 11. 0–14.0 3.0 1.2 0.1 0.06
11 B 15%Cr-Mo 2.0–3.3 2.0 1.5 2.5 14.0–18.0 3.0 1.2 0.1 0.06
11 D 20%Cr-Mo 2.0–3.3 2.0 ... malleable iron.
114
Foseco Ferrous Foundryman’s Handbook
toughness are required. Applications are excavating buckets, travelling wheels,
gears, tractor track links and pneumatic tool...