Inspection Evaluation And Repair Of Steel structures Part 12 docx
Inspection Evaluation And Repair Of Steel structures Part 12 docx
... type of connection (intersection
of bracing members, diaphragms, and girders) is a very common occurrence on lift gates, miter gates,
tainter gates, and bridges. Flanges of bracing members and ... composed of a steel outer frame, two support beams, and several screen bars that span the
frame across the support beams. The bars were attached on the upstream face of the rac...
Inspection Evaluation And Repair Of Steel structures Part 1 docx
... describes the inspection, evaluation, and repair of hydraulic steel structures,
including preinspection identification of critical locations (such as fracture critical members and various con-
nections) ... or lift gates, but some
1-1
US Army Corps
of Engineers®
ENGINEERING AND DESIGN
Inspection, Evaluation, and Repair
of Hydraulic Steel Structures...
Inspection Evaluation And Repair Of Steel structures Part 4 docx
... periodic inspection of hydraulic
steel structures, if necessary. These methods, discussed in Chapter 4, include dye penetrant, magnetic particle,
or eddy-current methods for inspection of cracks, and ... contact surfaces of the structure and seal, galvanic corrosion if the seal plate is of
a dissimilar metal to that of the structure itself, or erosion corrosion if abras...
Inspection Evaluation And Repair Of Steel structures Part 6 docx
... Behavior of Steel Materials
a. The operating service temperature of a steel structure has a significant effect on the fracture behavior
of the steel. For low- and intermediate-strength steels, ...
Structural Evaluation
6-1. Purpose of Evaluation
a. Structural evaluation is the process of determining the capability of a structure to perform its intended
f...
Inspection Evaluation And Repair Of Steel structures Part 7 docx
... of σ and a. Stress-intensity factors for various types of geometries can be
calculated using the information included in Figures 6-8 through 6-16 (Barsom and Rolfe 1987). Barsom and
Rolfe and ... the distance between the edge of component and edge of
crack in the through-thickness direction
Figure 6-4. Resolution of a discontinuity (after British Standards
Insti...
Inspection Evaluation And Repair Of Steel structures Part 13 docx
...
Pennsylvania Department of Transportation 1988
Pennsylvania Department of Transportation. 1988. “Guidelines for Fatigue and Fracture Safety Inspection of
Bridges,” Commonwealth of Pennsylvania, Department ... Manual of Steel Construction,” 9
th
ed., Chicago, IL.
American Institute of Steel Construction 1994
American Institute of Steel Construction. 1994. “Load...
Inspection Evaluation And Repair Of Steel structures Part 2 pot
... toughness of steel is generally a function of chemical
composition, thermomechanical history, and microstructure. Chemical composition affects the toughness of a
steel, since the addition of solute ... especially true of welds on riveted structures, since the
structural steels typically used in older structures are not characterized as steels for welding. A discussion of...
Inspection Evaluation And Repair Of Steel structures Part 3 potx
... structural evaluation is included and the severity of the condition can be
quantitatively compared with previous and future observations.
c. Evaluation. Evaluation of the effects of existing ... the performance of a hydraulic steel structure. The extent and nature of any noticeable
plastic deformation should be noted and accurately described during the inspecti...
Inspection Evaluation And Repair Of Steel structures Part 5 pot
... inspected structures, date and time of inspection, type of inspection, inspection
procedure, inspection equipment, inspector identity and qualifications, and a record of discontinuities detected
that ... results of NDT.
(c) NDT Level III: An NDT Level III individual shall be capable of establishing techniques and
procedures; interpreting codes, standards, and...
Inspection Evaluation And Repair Of Steel structures Part 8 ppt
... (Pennsylvania Department of Transportation 1988).
Figure 6-23. Development of maintenance schedule
6 -12. Recommended Solutions for Distressed Structures
a. If a thorough evaluation of the ... involve repair
of fractured members using qualified welding procedures and improved fatigue details or bolted cover plates.
A long-term solution would involve detailed i...
Từ khóa: