... below:
Size 4: 19.2mm
2
(0.03in
2
, or slightly bigger than 6 AWG)
Size 5: 60mm
2
(0.09in
2
, or slightly bigger than 1 AWG)
Size 6: 75mm
2
(0.12in
2
, or slightly bigger than 2/0 AWG)
Plain washers
Spring ... also be configured as a digital input, frequency output or PWM output.
Refer to the Commander SK Advanced User Guide for more information.
NOTE
B4 Digital Input - Enable/Reset*/**
B...
... năng
Dữ liệu
Mặc định
Đơn
vị
A061
Giới hạn tần số
trên
0.0/giới hạn tần số thấp đến tần số
Max
0.0
A261
Giới hạn tần số trên
thứ 2
0.0/giới hạn tần số thấp đến
tần số Max ...
Giới hạn tần số dưới
0.0 /tần số bắt đầu đến giới hạn
tần số trên
0.0
A262
Giới hạn tần số trên
thứ 2
0.0 /tần số bắt đầu đến giới hạn tần
số trên thứ 2
0.0...
... achieve inverter coast to stop.
5.1.3 Indicator light description
5.1.3.1 Function Indicator Light Description
Indicator Light Name Indicator Light Description
RUN/TUNE
Extinguished: stop status ...
.19.
4.2 Terminal Configuration
4.2.1 Main Circuit Terminals (380VAC)
Figure 4.2 Main circuit terminals (0.4~0.75kW 1AC 220V).
R S T U V W
(+) PB
POWER MOTOR
Figure 4.3 Main circu...
... collector output
COM
Common ground terminal for digital signal and +24V (or external
power supply).
+10V Supply +10V for inverter.
HDO
High speed pulse output terminal. The corresponding ... NFO-1200
CHV100 Series Close Loop Vector Control Inverter
.18.
Figure 3.7 Disassembly of metal plate cover.
Figure 3.8 Open inverter cabinet.
CHV100 Series Close Loop Vector Contro...
... hole
Figure 1.4 Part name of inverter (22kW ~132kW)
CHV160A series special inverter for water supply
36
Figure 6.2 Effect of carrier frequency.
Carrier frequency
Model
Highest Carrier ... RO1BRO1C
RO2A RO2BRO2C
RO3A RO3B
RO3C
Figure 4.5 Control circuit terminals.
RT1ART1B
RT2ART2B
RT3ART3B
RT4ART4B
RT5ART5B RT7ART7B
RT8ART8BRT6ART6B
Figure 4.6 terminals on the water suppl...
...
0.00~
P3.07
5.00Hz
P3.04
ASR high
speed
proportion
gain
0~100 0~100 25
P3.05
ASR high
speed integral
time
0.01~10.00s 0.01~10.00s 1.00s
P3.06
Speed
detection high
speed filter
time
0~9 ... Indicator light description
5.1.3.1 Function indicator light description
Function indicator Description
RUN/TUNE
Extinguished: stop status
Flickering: parameter autotuning status...
... blinks.
(Display A001)
”A” blinks.
The figure lighting is decided by
pushing STR key.
[3] Change third figure of
function code No.
Third figure “0” blinks.
Don’t change third figure and
push the STR key ... second figure of
function code No.
Second figure, “0” blinks.
Push the key.
STR
(Confirm “0”)
(Display A021)
Second figures, “2” blinks.
1
Push the key.
(2 times)
[5] Change first...