... http://www.me.mtu.edu/~mavable/MoM2nd.htm
M. Vable Mechanics of Materials: Review
August 2012
Factor of Safety
Sudden changes in geometry, loading or material properties causes stress concentration. The effect of these sudden ... from: http://www.me.mtu.edu/~mavable/MoM2nd.htm
M. Vable Mechanics of Materials: Review
August 2012
Strain
• Measure of relative movement of t...
... Saouma Mechanics of Materials II
Draft
Part I
CONTINUUM MECHANICS
Draft
DRAFT
Lecture Notes
Introduction to
MECHANICSofMATERIALS
Fundamentals of Inelastic Analysis
c
VICTOR E. SAOUMA
Dept. of ... [σ]=[A][σ][A]
T
(2.39)
Victor Saouma Mechanics of Materials II
Draft
iv
Victor Saouma Mechanics of Materials II
Draft
14 MATHEMATICAL PRELIMINARIES; Part I Vectors and Ten...
... diagrams of various
groups of materials and to divide materials into two broad categories
on the basis of these characteristics, namely, the ductile materials
and the brittle materials.
Ductile materials, ... the yield strength of the
material.
In the case of aluminum (Fig. 2.6b) and of many other ductile
materials, the onset of yield is not characterized by a ho...
... moments
of area and the product second moment
of
area about any set of perpendicular axis at a
known orientation to the principal axes.
MECHANICS
OF
MATERIALS
2
An introduction to the Mechanics ...
N.
The horizontal coordinate of
N
then gives the value
of
IN.A.
t
E.J.
Hem,
Mechanics ofMuteriuls
I,
Butterworth-Heinemann,
1997.
12
Mechanics
of
Materials...
... alloy
A
O
0.002 offset
s
e
FIG. 1-14 Arbitrary yield stress
determined by the offset method
SECTION 1.1 Introduction to Mechanics of Materials 5
1.1 INTRODUCTION TO MECHANICS OF MATERIALS
Mechanics of materials ... branch of applied mechanics that deals
with the behavior of solid bodies subjected to various types of loading.
Other names for this field of study are...