Báo cáo hóa học: " Fabrication of complete titania nanoporous structures via electrochemical anodization of Ti" docx
Báo cáo hóa học: " Fabrication of complete titania nanoporous structures via electrochemical anodization of Ti" docx
... Schematic of fabrication process of obtaining TiO
2
nanotubes with nanoporous layer on top and complete titania
nanoporous (TNP) structure via two-step anodization: (a) Ti-foil, (b) first anodization ... 6:332
http://www.nanoscalereslett.com/content/6/1/332
Page 4 of 10
NANO EXPRESS Open Access
Fabrication of complete titania nanoporous
structures via elect...
Báo cáo hóa học: " Fabrication and ultraviolet photoresponse characteristics of ordered SnOx (x ≈ 0.87, 1.45, 2) nanopore films" potx
... cross-sectional FE-SEM
images of a typical AAO template consisting of a
Figure 1 Schematic diagram of the fabrication process of ordered SnO
x
nanopore films. (a) AAO template; (b) top view of the ordered tin
nanopores ... higher concen-
tration of the oxygen vacancies will give higher probabil-
ity of the adsorption of oxygen molecules onto the
surface of SnO
x
films, lea...
Báo cáo hóa học: " Fabrication of core/shell ZnWO4/carbon nanorods and their Li electroactivity" ppt
... [HRTEM] was performed for further sample
analysis. The electrochemical performance of the sam-
ples versus that of lithium was measured by means of a
multichannel potentiostati c/galvanostatic system ... after heat treatment of up to
700°C.
Figure 2 shows the XRD patterns of the as-pr epared
pure ZW and obtained C-ZW nanorods. All the reflec-
tion peaks of the samples were compl...
Báo cáo hóa học: " Fabrication and characterization of carbon-based counter electrodes prepared by electrophoretic deposition for dye-sensitized solar cells" doc
... 7:53
http://www.nanoscalereslett.com/content/7/1/53
Page 2 of 4
Comparison of the h and FF of the counter electrodes
with three different carbon-based materials measured
under similar deposition conditions of optical transmit-
tance ... generation of photovoltaic devices, offering several
advantages, including moderate light-to-electricity conver-
sion efficiency, easy fabrication,...
báo cáo hóa học: " Fabrication of flexible UV nanoimprint mold with fluorinated polymer-coated PET film" docx
... and
without any defects . Due to the slightly tapered profile
of the patterns of the Si master mold and elastic nature
of the hot embossing process of the fluorinated polymer,
the hot -embossed patterns ... 6:458
http://www.nanoscalereslett.com/content/6/1/458
Page 3 of 5
Figure 2 shows the overall fabrication process of the
UV nanoimprint template using the hot embossing pro-
c...
Báo cáo hóa học: " Fabrication of HfO2 patterns by laser interference nanolithography and selective dry etching for III-V CMOS application" pdf
... formation of tapered H fO
2
etch profiles. Optimi-
sation of the CF
4
plasma composition and etch bias
Figure 4 Schematic of the HfO
2
nanostructuring process.(a) Schematic drawing of the starting ... images of the HfO
2
nanopattern.(a) Three-dimensional view of the nanostructured HfO
2
/GaAs surface morphology. (b) Cross-
section scan profile of an etched trench.
Figure 2 HR-SE...
Báo cáo hóa học: " Fabrication and evolution of multilayer silver nanofilms for surface-enhanced Raman scattering sensing of arsenate" pdf
... scattering of
biological molecules on metal colloid II: effects of aggregation of gold
colloid and comparison of effects of pH of glycine solutions between
gold and silver colloids. Appl Spectrosc ... with a scan area of 2 ×
2mm
2
, a step size of 0.5 × 0.5 mm
2
(X × Y).
Results and discussion
Characterization and evolution process of Ag nanofilms
To investigate the evolutio...
Báo cáo hóa học: "Fabrication and magnetic properties of granular Co/porous InP nanocomposite materials" ppt
... over pore sidewall surface of InP template, which was different from that of ceramic template and may
open up new branch of fabrication of nanocomposites. The mag netism of such Co/InP nanocomposites ... mjzheng@sjtu.edu.cn
1
Laboratory of Condensed Matter Spectroscopy and Opto-Electronic Physics,
and Key Laboratory of Artificial Structures and Quantum Control (Ministry of...
Báo cáo hóa học: " Fabrication of functional micro- and nanoneedle electrodes using a carbon nanotube template and electrodeposition" ppt
... between t he tips. For the fabrication of CNT
nanoneedles, the center of the CNT bundle nanowire, a
weak point, was cut using high electric current.
For the fabrication of functional micro - and ... Shape-Controlled Electrodeposition of
Gold Nanostructures. J Phys Chem B 2006, 110:23478.
18. Xu L, Guo Y, Liao Q, Zhang J, Xu D: Morphological Control of ZnO
Nanostructures by Elect...
Báo cáo hóa học: " Fabrication of ordered nanoporous anodic alumina prepatterned by mold-assisted chemical etching" docx
... used
to achieve prepatterning of Al substrates, thus avoiding
fabrication of the expensive hard imprint stamp. How-
ever most of them have limitations in scalability or size
of ordered domains. Consequently, ... prepatterned guided growths are two
kinds of anodization technology, which are competing
in the aspects of product quality and production cost.
For prepatterned guided...
Từ khóa: