micromixers fundamentals, design and fabrication micro and nanotechnologies, 2008, p 328
micromixers. fundamentals, design and fabrication. micro and nanotechnologies, 2008, p.328
... Sensor and Actuator Workshop, Hilton Head Island, SC, 4À8 June, 2000, pp. 105À110. 4. H. Lo¨ we, V. Hessel and A. Muller, ‘‘Microreactors. prospects already achieved and possible misuse,’’ Pure Applied ... and fabrication of fluidic interconnects that are needed for interfacing micromixers to larger-scale devices and equipment. Different concepts and designs for micromixers a...
Ngày tải lên: 04/06/2014, 15:06
fabrication and design of resonant microdevices. micro and nanotechnologies, 2008, p.198
... the system response to a step input. 6 Fabrication and Design of Resonant Microdevices Figure 1.3 Amplitude and phase responses of two resonators with quality factors of 5 and 25 and identical ... cases be approximated as the response of an underdamped second order s ystem . An ideal resonance behaviour produces a peak in amplitude response and a −180 ◦ phase shift in phase resp...
Ngày tải lên: 04/06/2014, 15:18
plasma nanoscience. basic concepts and applications of deterministic nanofabrication, 2008, p.565
... chemical vapor deposition PEM proton exchange membrane PET polyethylene terephtalate PL photoluminescence PLD pulsed laser deposition PMCS pulsed microplasma cluster source PT porous template QD quantum ... how to develop plasma-based nanoassem- bly processes, select the right plasma type, design appropriate plasma tools and reactors, and provided specific process parameters that led us...
Ngày tải lên: 04/06/2014, 14:49
Báo cáo " Research, design and fabrication of a high-power combiner using Wilkinson bridge of L-band " pptx
... lossless, reciprocal, and matched. Hence, the Wilkinson power divider was developed. Here, an isolation resistor is placed between the output ports to help achieve the properties. Dissipation of energy ... lossless and resistive T-junction power dividers have no isolation between the outputs of port 2 and port 3, and the lossless divider is not matched at all ports, and the resi...
Ngày tải lên: 22/03/2014, 11:20
RESEARCH, DESIGN AND FABRICATION OF DIGITAL INFORMATION TRANSIMITER WORKING IN THE VHF BAND
... 3.3.Detailed descriptions 3.3.1 Input Band Pass Filter The input filter provides band-limiting and is typically a second- or higher-order filter 3.3.2 Comparator The comparator compares the band-limited ... CVSD converter shall be capable of operating at 16 and 32 kbps. 3.5.3 Input and Output Filters The analog input shall be band pass filtered. The analog output shall be low pass filt...
Ngày tải lên: 27/05/2014, 20:57
SAP2000® Linear and Nonlinear Static and Dynamic Analysis and Design of Three-Dimensional Structures
... SAP2000 Version 8 2 - 2 The Project 2 The Project The tutorial project is a five panel, sloped truss bridge. The bridge spans 60 feet, and has a width and height of 12 feet each. The supports ... trademark of Microsoft Corporation. Adobe and Acrobat are registered trademarks of Adobe Systems Incorporated. Copyright The computer program SAP2000 and all associated documentatio...
Ngày tải lên: 06/09/2012, 15:56
Simulation and Fabrication of Piezoelectric mems Inkjet Print head
... physical phenomenon, mechanism of operating principle and etc. With the specifications in place, the next step is design which is the most important step in the flow sheet from concept to prototype. ... combine the FEM and FVM solutions in the same integrated PIPH, the pressure at the support layer-fluid interface and the deformation at PZT-support layer interface and support l...
Ngày tải lên: 10/04/2013, 13:48
Handbook of Micro and Nano Tribology P4
... Sputtered metal film Sputtered+ PFPE C Polished Sputtered metal film Sputtered+ PFPE D Textured Plated metal film Sputtered+ PFPE E Polished Plated metal film Sputtered+PFPE From Bhushan, B. and Doerner, ... Disks Disk Designation Substrate (Ni P on Al–Mg) Construction of Magnetic Layer Overcoat A Polished γ-Fe 2 O 3 particles in epoxy binder Perfluoropolyether (PFPE) lubricant (liquid) B Tex...
Ngày tải lên: 18/10/2013, 09:15
Handbook of Micro and Nano Tribology P8
... with the tip and then measuring the maximum force needed to pull the tip and sample apart, Mate (1993) and Bhushan and Ruan (1994). Figure 8.2 shows typical normal load as a function of separation ... function of tip–sample separation distance curves comparing the behavior of clean Si(100) surface to a surface lubricated with free and unbonded PFPE lubricant, and a surface where t...
Ngày tải lên: 18/10/2013, 09:15
Handbook of Micro and Nano Tribology P14
... rheological properties of thin films of lubricants are expected to be different from their bulk properties. Fomblin Z and Demnum S are linear PFPE, and Fomblin Y and Krytox 143 AD are branched PFPE, where ... Media Bhushan and co-workers measured friction properties of magnetic media including polished and textured thin-film rigid disks, MP, BaFe and ME tapes, and PET tape substra...
Ngày tải lên: 18/10/2013, 09:15