6FM200D-X 12V 200Ah(20hr) The rechargeable batteries are lead-lead dioxide systems The dilute sulfuric acid electrolyte is absorbed by separators and plates and thus immobilized Should the battery be accidentally overcharged producing hydrogen and oxygen, special oneway valves allow the gases to escape thus avoiding excessive pressure build-up Otherwise, the battery is completely sealed and is, therefore, maintenance-free, leak proof and usable in any position Battery Construction Component Positive plate Negative plate Container Cover Safety valve Terminal Separator Electrolyte Raw material Lead dioxide Lead ABS ABS Rubber Copper Fiberglass Sulfuric acid General Features ● ● ● ● ● ● ● ● Absorbent Glass Mat (AGM) technology for efficient gas recombination of up to 99% and freedom from electrolyte maintenance or water adding Not restricted for air transport-complies with IATA/ICAO Special Provision A67 UL-recognized component Can be mounted in any orientation Computer designed lead, calcium tin alloy grid for high power density Long service life, float or cyclic applications Maintenance-free operation Low self discharge Dimensions and Weight Length(mm / inch) Width(mm / inch) Height(mm / inch) Total Height(mm / inch) Approx Weight(Kg / lbs) 522 / 20.55 238 / 9.37 218 / 8.58 223 / 8.78 65 / 143.3 Performance Characteristics Nominal Voltage 12V Number of cell Design Life 10 years Nominal Capacity 77oF(25oC) 20 hour rate (10.0A, 10.8V) 200Ah 10 hour rate (18.7A, 10.8V) 187Ah hour rate (35.8A, 10.5V) 179Ah hour rate (126A, 9.6V) 126Ah Internal Resistance 3.5mOhms Fully Charged battery 77oF(25oC) Self-Discharge 3% of capacity declined per month at 20oC(average) Operating Temperature Range Discharge -20~60oC Charge -10~60oC Storage -20~60oC o o 1000A(5s) Max Discharge Current 77 F(25 C) Short Circuit Current 3300A Charge Methods: Constant Voltage Charge Cycle use Maximum charging current Temperature compensation Standby use Temperature compensation 77oF(25oC) 2.30-2.35VPC 60A -30mV/oC 2.23-2.27VPC -20mV/oC Discharge Constant Current (Amperes at 77oF25oC) End Point Volts/Cell 5min 10min 15min 30min 45min 1h 3h 5h 10h 20h 1.60V 537 423 350 215 156 126 57.0 38.0 19.1 10.8 1.65V 489 403 340 207 150 122 55.0 37.0 19.0 10.6 1.70V 459 385 327 201 146 118 54.5 36.4 18.9 10.4 1.75V 439 367 310 195 142 115 52.9 35.8 18.8 10.2 1.80V 408 318 261 182 137 112 50.5 35.2 18.7 10.0 Discharge Constant Power (Watts at 77oF25oC) End Point Volts/Cell 5min 10min 15min 30min 45min 1h 2h 3h 5h 1.60V 876 727 607 392 288 227 137 108 72.6 1.65V 856 701 586 380 280 222 135 106 71.6 1.70V 816 677 569 373 274 218 132 104 70.8 1.75V 774 653 561 363 269 214 128 100 69.9 1.80V 737 619 538 355 265 212 125 97.0 69.0 (Note)The above characteristics data are average values obtained within three charge/discharge cycles not the mimimum values page1 of www.vision-batt.com 6FM200D-X 12V200Ah Current Charged Volume Voltage O Discharge characteristic (25 C) Charge characteristic curve Constant voltage charge characteristic (0.25CA,25 oC) (%) (XCA) (V) 12.0 Battery voltage(V) 140 52.9A 35.8A 9.6 18.7A 120 0.25 100 0.20 80 200A 126A 400A 0.15 20 30 10 60 10 20 0.10 20 0.05 0 h CHARGED VOLUME 14.0 CHARGE VOLTAGE 13.0 60 40 15.0 12.0 11.0 Discharge time (V/8V) (V/6V) (V/4V) (V/CELL) 7.8 5.2 2.6 10.0 7.5 5.0 2.5 14.4 9.6 7.2 4.8 2.4 13.8 9.2 6.9 4.6 2.3 13.2 8.8 6.6 4.4 2.2 CY CL 10 12 14 16 18 20 ND B EU SE Y US 12 14 16 18 Storage time: months 20 90 80 70 60 E 40 oC 30 o C 20 o C 50 10 20 30 40 50 Ambient temperature( oC) 40 60 10 Cycle service life in relation to depth of discharge Life characteristics of standby use 120 120 100 100 Capacity(%) Capacity(%) 110 -10 80 60 Testing conditions: floating voltage: 2.27 to 2.30V/Cell o o ambient temperature: 25 C(77 F) 80 60 40 40 20 20 Life(year) 100% D.O.D 200 30% Depth of discharge 50% D.O.D 400 600 800 1000 1200 1400 1600 Number of cycles(cycles) Temperature effects on float life Temperature effects on capacity 120 15 100 2.30V/Cell 10 Capacity (%) Life(years) 100 S TA Self-discharge characteristic Capacity(%) (V/12V) 10.4 15.0 Charging time (hours) Relationship between charging voltage and temperature 15.6 CHARGING CURRENT C 0 C C 80 60 1.0C 2.0C 40 20 10 20 30 40 50 -20 -10 Temperature( o C) THE INTERNATIONAL CERTIFICATION NETWORK ISO9001:2000 MH25860 10 20 Temperature( oC) 30 40 G4M19906-9202-E-16 www.vision-batt.com Shenzhen Center Power Tech Co., Ltd Center Power Industrial Park, Tongfu Industrial District Dapeng Town, 518120 Shenzhen, China Tel: (+86-755) 8431 8088 Fax: (+86-755) 8431 8038 E-mail: sales@vision-batt.com Copy Right Shenzhen Center Power Technology Co., Ltd (Edition 2011-8) Page of 50 .. .6FM200D- X 12V200Ah Current Charged Volume Voltage O Discharge characteristic (25 C) Charge characteristic curve Constant voltage charge characteristic (0.25CA,25 oC) (%) (XCA) (V) 12.0... Power Industrial Park, Tongfu Industrial District Dapeng Town, 518120 Shenzhen, China Tel: (+86-755) 8431 8088 Fax: (+86-755) 8431 8038 E-mail: sales@vision-batt.com Copy Right Shenzhen Center