Sổ tay tra mác Thép kỹ thuật

669 749 7
Sổ tay tra mác Thép kỹ thuật

Đang tải... (xem toàn văn)

Tài liệu hạn chế xem trước, để xem đầy đủ mời bạn chọn Tải xuống

Thông tin tài liệu

Handbook of Comparative World Steel Standards Third Edition John E. Bringas, Editor DS67B ASTM AFNOR API BSI CEN CSA DIN ISO JIS SAE Handbook of Comparative World Steel Standards ASTM DS67B Third Edition John E. Bringas, Editor ii Handbook of Comparative World Steel Standards Library of Congress Cataloging-in-Publication Data Handbook of comparative world steel standards / John E. Bringas, editor. – 2 nd ed. p.cm – (ASTM data series; DS 67A) “ASTM stock number: DS67A.” ISBN 0-8031-3042-2 1. Steel — Standards —Handbooks, manuals, etc., 2. Steel alloys — Standards — Handbooks, manuals, etc. I. Bringas, John E., 1953- II. ASTM data series publication; DS 67A. TA472.H25 2002 620.1’7’0218—dc21 2001045950 CIP Copyright © 2004 ASTM International, West Conshohocken, PA. All rights reserved. This material may not be reproduced or copied, in whole or in part, in any printed, mechanical electronic, film, or other distribution and storage media, without the written consent of the publisher. Photocopy Rights Authorization to photocopy items for internal, personal, or educational classroom use, or the internal personal, or education classroom use of specific clients, is granted by the American Society for Testing and Materials (ASTM International) provided that the appropriate fee is paid to the Copyright Clearance Center, 222 Rosewood Drive, Danvers, MA 01923; Tel: 978-750-8400; online: http://www.copyright.com/ . Printed in USA August 2004 iii Handbook of Comparative World Steel Standards Acknowledgements The author gratefully acknowledges the assistance of Michael Ling, P.Eng. and Denise Lamy, P.Eng., who were the Assistant Editors of the second (DS67A) and third (DS67B) editions of this handbook. They worked many long hours, weekends, and holidays to researching hundreds of standards and double-checking thousands of pieces of data. Their work in compiling the heat treatment terms for each standard and researching the new EN piping and tubing standards was of particular importance. They were also my main sounding boards when difficult technical decisions had to be made. There were also several ASTM committee members contacted for their input during the progress of this handbook, including Ralph Davison, Frank Christensen, David Knupp, and John Mahaney. They added valuable insights into the history and technical aspects of the ASTM standards data found in this handbook. The ASTM publishing staff—including Kathy Dernoga, Roberta Storer and Margie Lawlor—was most supportive of my requests to obtain access to the hundreds of standards needed to write this book and assistance with editing. I appreciate their patience and confidence in me to complete the work. Thank you all. The author also acknowledges the dedicated assistance of Steven Li and Nina Phan who assisted in the research and entered much of the data in the book with care and diligence. A special thank you to Christine Doyle who entered data almost endlessly into the late hours of the night for the second edition (DS67A), and to Debbie Knack–who kept the office running smoothly during the production of this handbook. A special thanks is extended to IHS Engineering Products for use of their Engineering Resource Center (ERC). One person could not have produced this handbook and the accompanying e-book. It took a dedicated team of professionals. These acknowledgments cannot adequately express the author’s sincere appreciation and gratitude for everyone’s assistance. Without it, this book would never have been completed. v Handbook of Comparative World Steel Standards Preface This is the book I never wanted to write, but always wanted to own. As a metallurgical engineer and long time user of steel standards, author of the four CASTI Metals Data Books, and member of ASTM A01 and B02 standard committees, I knew all too well the many pitfalls and challenges of writing such a handbook. There were many steel standards from around the world that were new to me, which created far too many surprises and delays in completing this book. Comparing steel standards is not an exact science, so the biggest challenge of preparing such a book was deciding on the "rules of comparison." Of the similar books on the market today, none explain in detail why one steel is comparable to another. They simply appear together in a list of steels. I kept a daily diary to help construct a workable set of comparison rules that I could share with other users to assist them in understanding how and why one steel is comparable to another. To say the least, these rules changed from chapter to chapter while the book was being written. It wasn't until the last chapter and appendix were completed that I was able to finalize the rules of comparison. In the end, a complete review of the book was performed resulting in the reorganization of some chapters and the fine-tuning of others. There were too many occasions when I thought the book was finished, only to have to change, add, or delete a rule which made yet another review of the book necessary. After more than two years of researching steel standards and gathering data from around the world for the 2 nd and 3 rd editions of this handbook, then developing a comparison order to more than 100,000 pieces of data, this handbook is an ongoing and expanding project. The addition of a fully searchable e-book on CD-ROM makes this product even more valuable, since trying to find one piece of data in more than 100,000 is not an easy task. The e-book makes searching for a comparable steel a quick and easy process. In some cases, the user may find out that the steel is non-comparable. I hope you enjoy using this handbook as much as I will. Tie a chain to it and anchor it to your desk, because once others see it, they'll want to use your copy. I am interested in your comments and suggestions to improve this handbook, so I encourage you to send your feedback directly to ASTM. John E. Bringas, P.Eng. vi Handbook of Comparative World Steel Standards Getting Started With This Book Comparing steel standards is not an exact science and there is no foolproof method. When you begin to use this book, you'll quickly discover that there is no such thing as "equivalent" steel standards. Then, consider the fact that not all steels have comparative counterparts and you'll begin to understand the methodology used in this book. Before proceeding directly to the contents of this book, it is strongly recommended that you read Chapter 1, which includes a detailed explanation of the "rules of comparison" used in this book. Since there was insufficient space on one page to place both the chemical composition and mechanical properties tables, they were split into two separate tables. To assist the user in keeping track of which comparison criteria were used for a given steel, each table within a chapter was sequentially numbered and appended with either the letter A or B. Table numbers ending in the letter A designate that the table was the main criterion used for comparison; whereas table numbers ending with the letter B were "mirrored" from the A table. Each group of steel data in the tables is separated by two types of horizontal lines: black and grey. Black lines separate groups of steels that are more closely comparable to each other, whereas grey lines separate steel data within a comparative group. Caution: do not confuse the thinner dividing black line within a table, with the thicker black line that borders the outside of the table. The pages are formatted to keep comparative groups together as much as possible. However, when a group of comparative steels extends to more than one page, a note is place at the bottom of the page to indicate that the comparative group continues on the following page, i.e., NOTE: This section continues on the next page. vii Handbook of Comparative World Steel Standards Getting Started With This CD-ROM Minimum System Requirements - Intel Pentium processor - Microsoft Windows 98 Second Edition, Millennium Edition, Windows NT 4.0 (SP 6), 2000 (SP 2), XP Professional or XP Home Edition - 32 MB RAM and 640 x 480 video resolution (higher resolution will improve readability) - 60 MB hard disk space Adobe Acrobat and Adobe Reader In order to view the E-book of Comparative World Steel Standards you must have PDF viewing software (such as Adobe Acrobat or Adobe Reader) installed prior to running the CD-ROM. If you already have PDF viewing software installed, insert the CD-ROM into your CD drive and click the “View E-book” button in the software menu to open the E-book. If you need to install Adobe Reader, please visit the Adobe website at www.adobe.com to download and install the latest version of the software. The Adobe website has detailed information regarding Adobe software and its minimum system requirements. Please review the pertinent information regarding Adobe software before download and installation. Getting Started The E-book of Comparative World Steel Standards on CD-ROM is a fully searchable Adobe PDF file. Once the E-book is opened, a menu will appear with several options to navigate and search through the E-book. This menu contains links to the Table of Contents, all four Indexes, and to the Search function. Listings in the Table of Contents of the E-book are linked to their respective pages so that users may click on these listings to navigate directly to the desired page. Starting the search tool can be done by clicking on the Search link in the main menu or by clicking on the Search button on the Acrobat/Reader tool bar. Please be aware that in some versions of Acrobat/Reader there is a Find tool and a Search tool. In general, the Search tool is a more powerful searching function. For more assistance with using Adobe Acrobat or Adobe Reader, click on the Help menu within the Adobe software. Troubleshooting If the main menu does not appear on your screen after the CD-ROM is inserted in your computer, the CD-ROM startup Autostart function for Windows 95/98/Me/NT/2000 is not setup. Please consult your OS manual for instructions to enable the Autostart function. ix Handbook of Comparative World Steel Standards Table of Contents 1. Introduction to Comparing World Steel Standards 1 Myth and Methodology When Comparing Steel Standards 1 Comparative and Closest Match 2 Organization 5 Definition and Steel Terms 5 Cautionary Note 7 Questions Regarding the Rules of Comparison 8 Non-Comparable Steels 8 Criteria for Comparing Steels 8 List of Comparison Rules 10 Brief Introduction to Steel Standards and Designation Systems 12 ASTM Designation System 12 ASTM Reference Standards and Supplementary Requirements 13 SAE Designation System and Discontinued AISI Designation System 14 Carbon and Alloy Steels 14 UNS Designation System 15 Canadian Standards Association (CSA) 16 Introduction to European Standard Steel Designation System 17 EN 10027 Standard Designation System for Steels 18 Steel Names 18 Steel Numbers 18 Former National Standards Replaced by CEN Standards 19 2. Carbon and Alloy Steels for General Use 21 2.1 Chemical Composition of Carbon Steels for General Use 23 2.2 Chemical Composition of High Manganese Carbon Steels for General Use 34 2.3 Chemical Composition of Alloy Steels for General Use 35 2.3.1 Chromium (Cr) Steels 35 2.3.2 Chromium-Molybdenum (Cr-Mo) Steels 37 2.3.3 Chromium-Nickel (Cr-Ni) Steels 38 2.3.4 Nickel-Chromium-Molybdenum (Ni-Cr-Mo) Steels 39 2.3.5 Chromium-Molybdenum-Aluminum (Cr-Mo-Al) Steels 40 2.3.6 Boron (B) Steels 41 2.3.7 Chromium-Vanadium (Cr-V) Steels 42 2.4 Non-Comparable Carbon and Alloy Steels for General Use 43 3. Structural Steel Plates 47 3.1 Carbon Steels for Structural Steel Plates 50 3.1A Mechanical Properties of Carbon Steels for Structural Steel Plates 50 3.1B Chemical Composition of Carbon Steels for Structural Steel Plates 66 3.2 Alloy Steels for Structural Steel Plates 72 3.2.1A Mechanical Properties of High-Strength Low-Alloy Structural Steel Plates 73 3.2.1B Chemical Composition of High-Strength Low-Alloy Structural Steel Plates 75 3.2.2A Mechanical Properties of Alloy Steels for Structural Steel Plates 79 3.2.2B Chemical Composition of Alloy Steels for Structural Steel Plates 84 3.3 Structural Steels with Improved Atmospheric Corrosion-Resistance 88 3.3A Mechanical Properties of Structural Steels with Improved Atmospheric Corrosion-Resistance 88 3.3B Chemical Composition of Structural Steels with Improved Atmospheric Corrosion-Resistance 94 x Handbook of Comparative World Steel Standards 3.4 Non-Comparable Carbon Steels for Structural Steel Plates 97 3.5 Non-Comparable Alloy Steels for Structural Steel Plates 98 4. Pressure Vessel Steel Plates 99 4.1 Carbon Steels for Pressure Vessel Plates 103 4.1A Mechanical Properties of Carbon Steel Pressure Vessel Plates 103 4.1B Chemical Composition of Carbon Steel Pressure Vessel Plates 109 4.2 Carbon Steels for Pressure Vessel Plates - With Impact Testing Below -20°C 113 4.2A Mechanical Properties of Carbon Steels for Pressure Vessel Plates - With Impact Testing Below -20°C 113 4.2B Chemical Composition of Carbon Steels for Pressure Vessel Plates - With Impact Testing Below -20°C 115 4.3 ½Mo Alloy Steels for Pressure Vessel Plates 117 4.3A Chemical Composition of ½Mo Alloy Steels for Pressure Vessel Plates 117 4.3B Mechanical Properties of ½Mo Alloy Steels for Pressure Vessel Plates 119 4.4 Cr-Mo Alloy Steels for Pressure Vessel Plates 121 4.4.1A Chemical Composition of ¾Cr-½Mo Alloy Steels for Pressure Vessel Plates 121 4.4.1B Mechanical Properties of ¾Cr-½Mo Alloy Steel for Pressure Vessel Plates 121 4.4.2A Chemical Composition of 1Cr-½Mo Alloy Steels for Pressure Vessel Plates 122 4.4.2B Mechanical Properties of 1Cr-½Mo Alloy Steels for Pressure Vessel Plates 122 4.4.3A Chemical Composition of 1¼Cr-½Mo Alloy Steels for Pressure Vessel Plates 123 4.4.3B Mechanical Properties of 1¼Cr-½Mo Alloy Steels for Pressure Vessel Plates 123 4.4.4A Chemical Composition of 2¼Cr-1Mo Alloy Steels for Pressure Vessel Plates 124 4.4.4B Mechanical Properties of 2¼Cr-1Mo Alloy Steels for Pressure Vessel Plates 125 4.4.5A Chemical Composition of 3Cr-1Mo Alloy Steels for Pressure Vessel Plates 126 4.4.5B Mechanical Properties of 3Cr-1Mo Alloy Steels for Pressure Vessel Plates 126 4.4.6A Chemical Composition of 5Cr-½Mo Alloy Steels for Pressure Vessel Plates 127 4.4.6B Mechanical Properties of 5Cr-½Mo Alloy Steels for Pressure Vessel Plates 127 4.4.7A Chemical Composition of 9Cr-1Mo Alloy Steels for Pressure Vessel Plates 128 4.4.7B Mechanical Properties of 9Cr-1Mo Alloy Steels for Pressure Vessel Plates 128 4.5 Ni Alloy Steels for Pressure Vessel Plates 129 4.5.1A Chemical Composition of ½Ni Alloy Steels for Pressure Vessel Plates 129 4.5.1B Mechanical Properties of ½Ni Alloy Steels for Pressure Vessel Plates 129 4.5.2A Chemical Composition of 1½Ni Alloy Steels for Pressure Vessel Plates 130 4.5.2B Mechanical Properties of 1½Ni Alloy Steels for Pressure Vessel Plates 130 4.5.3A Chemical Composition of 2¼Ni Alloy Steels for Pressure Vessel Plates 131 4.5.3B Mechanical Properties of 2¼Ni Alloy Steels for Pressure Vessel Plates 131 4.5.4A Chemical Composition of 3½Ni Alloy Steels for Pressure Vessel Plates 132 4.5.4B Mechanical Properties of 3½Ni Alloy Steels for Pressure Vessel Plates 133 4.5.5A Chemical Composition of 5Ni Alloy Steels for Pressure Vessel Plates 134 4.5.5B Mechanical Properties of 5Ni Alloy Steels for Pressure Vessel Plates 134 4.5.6A Chemical Composition of 9Ni Alloy Steels for Pressure Vessel Plates 135 4.5.6B Mechanical Properties of 9Ni Alloy Steels for Pressure Vessel Plates 136 4.6 Ni-Mo Alloy Steels for Pressure Vessel Plates 137 4.6.1A Chemical Composition of ½Ni-½Mo Alloy Steels for Pressure Vessel Plates 137 4.6.1B Mechanical Properties of ½Ni-½Mo Alloy Steels for Pressure Vessel Plates 138 4.6.2A Chemical Composition of ¾Ni-½Mo Alloy Steels for Pressure Vessel Plates 139 4.6.2B Mechanical Properties of ¾Ni-½Mo Alloy Steels for Pressure Vessel Plates 140 4.7 Ferritic and Martensitic Stainless Steels for Pressure Vessel Plates 141 4.7A Chemical Composition of Ferritic and Martensitic Stainless Steels for Pressure Vessel Plates 141 4.7B Mechanical Properties of Ferritic and Martensitic Stainless Steels for Pressure Vessel Plates 142 xi Handbook of Comparative World Steel Standards 4.8 Austenitic Stainless Steels for Pressure Vessel Plates 143 4.8A Chemical Composition of Austenitic Stainless Steels for Pressure Vessel Plates 143 4.8B Mechanical Properties of Austenitic Stainless Steels for Pressure Vessel Plates 146 4.9 Duplex Stainless Steels for Pressure Vessel Plates 151 4.9A Chemical Composition of Duplex (Ferritic-Austenitic) Stainless Steels for Pressure Vessel Plates 151 4.9B Mechanical Properties of Duplex (Ferritic-Austenitic) Stainless Steels for Pressure Vessel Plates 152 4.10 Non-Comparable Carbon and Alloy Steels for Pressure Vessel Plates 153 4.11 Non-Comparable Stainless Steels for Pressure Vessel Plates 156 5. Steel Tubes and Pipes 157 5.1 Carbon Steel Tubes for General and Structural Applications 165 5.1A Mechanical Properties of Carbon Steel Tubes for General and Structural Applications 165 5.1B Chemical Composition of Carbon Steel Tubes for General and Structural Applications 176 5.2 Alloy Steel Tubes for General and Structural Applications 185 5.2A Chemical Composition of Alloy Steel Tubes for General and Structural Applications 185 5.2B Mechanical Properties of Alloy Steel Tubes for General and Structural Applications 186 5.3 Stainless Steel Tubes for General and Structural Applications 188 5.3.1A Chemical Composition of Ferritic and Martensitic Stainless Steel Tubes for General and Structural Applications 188 5.3.1B Mechanical Properties of Ferritic and Martensitic Stainless Steel Tubes for General and Structural Applications 189 5.3.2A Chemical Composition of Austenitic Stainless Steel Tubes for General and Structural Applications 190 5.3.2B Mechanical Properties of Austenitic Stainless Steel Tubes for General and Structural Applications 193 5.4 Carbon Steel Tubes and Pipes for Low-Temperature Service 196 5.4A Mechanical Properties of Carbon Steel Tubes and Pipes - With Impact Testing Below -20°C 196 5.4B Chemical Composition of Carbon Steel Tubes and Pipes - With Impact Testing Below -20°C 198 5.5 Alloy Steel Tubes and Pipes for Low-Temperature Service 199 5.5A Chemical Composition of Alloy Steel Tubes and Pipes for Low-Temperature Service 199 5.5B Mechanical Properties of Alloy Steel Tubes and Pipes for Low-Temperature Service 200 5.6 Carbon Steel Tubes and Pipes for Pressure Purposes 202 5.6A Mechanical Properties of Carbon Steel Tubes and Pipes for Pressure Purposes 202 5.6B Chemical Composition of Carbon Steel Tubes and Pipes for Pressure Purposes 204 5.7 Carbon Steel Tubes and Pipes for Pressure Purposes at High Temperatures 206 5.7A Mechanical Properties of Carbon Steel Tubes and Pipes for Pressure Purposes at High Temperatures 206 5.7B Chemical Composition of Carbon Steel Tubes and Pipes for Pressure Purposes at High Temperatures 210 5.8 Alloy Steel Tubes and Pipes for Pressure Purposes at High Temperatures 213 5.8.1A Chemical Composition of ¼Mo Alloy Steel Tubes and Pipes for Pressure Purposes at High Temperatures 213 5.8.1B Mechanical Properties of ¼Mo Alloy Steel Tubes and Pipes for Pressure Purposes at High Temperatures 213 5.8.2A Chemical Composition of ½Mo Alloy Steel Tubes and Pipes for Pressure Purposes at High Temperatures 214 5.8.2B Mechanical Properties of ½Mo Alloy Steel Tubes and Pipes for Pressure Purposes at High Temperatures 215 [...]... Although the above list at first glance looks rather straightforward, there were difficult decisions regarding the steel comparisons within each chapter For example, ASTM has 9 definitions for pipe and 22 definitions for tube, depending on the standard's subject matter and application (see ASTM Dictionary of Engineering Science & Technology, 9th edition) In contrast, ISO 2604, Steel Products for Pressure Purposes... separately Since there was insufficient space on a page to place both the chemical composition and mechanical properties tables, they were split into two separate tables To assist the user in keeping track of the comparison criteria used for a given steel, each table within a chapter was sequentially numbered and appended with the letter A or B Table numbers ending in the letter A designate that it... amount of information on this topic could easily make up a complete book ASTM Designation System ASTM's designation system for metals consists of a letter (A for ferrous materials) followed by an arbitrary sequentially assigned number These designations often apply to specific products, for example A 548 is applicable to cold-heading quality carbon steel wire for tapping or sheet metal screws Metric... Electrotechnical Standardization (CENELEC), the European Telecommunications Standards Institute (ETSI), and the International Organization for Standardization (ISO) It also has close liaisons with European trade and professional organizations The principal task of CEN is to prepare and issue European standards (EN), defined as a set of technical specifications established and approved in collaboration with... Comparing World Steel Standards 19 Former National Standards Superseded by CEN Standards An increasing number of national European and UK standards are being withdrawn and superseded by EN standards This transition, from old to new standards, has made it increasingly more difficult to compare the superseded national standards with current standards from other nations outside of Europe and the UK, let alone . mechanical properties tables, they were split into two separate tables. To assist the user in keeping track of which comparison criteria were used for a given steel, each table within a chapter was

Ngày đăng: 19/04/2015, 01:00

Từ khóa liên quan

Mục lục

  • Cover

  • Gettings Started With This Book

  • Gettings Started With This CD-ROM

  • Table of Contents

  • Chapter 1 - Introduction to Comparing World Steel Standards

  • Chapter 2 - Carbon and Alloy Steels for General Use

  • Chapter 3 - Structural Steel Plates

  • Chapter 4 - Pressure Vessel Steel Plates

  • Chapter 5 - Steel Tubes and Pipes

  • Chapter 6 - Steel Forgings

  • Chapter 7 - Steel Castings

  • Chapter 8 - Wrought Stainless Steel

  • Chapter 9 - Steels for Special Use

  • Appendix 1 - ASTM Ferrous Metal Standards

  • Appendix 2 - ASTM Discontinued Ferrous Metal Standards

  • Appendix 3 - JIS Steel and Related Standards

  • Appendix 4 - JIS Discontinued Steel and Related Standards

  • Appendix 5 - CEN Current Steel Standards

  • Appendix 6 - CEN Standards with Superceded Former National Standards

  • Appendix 7 - Former National Standards Superceded by CEN Standards

  • Appendix 8 - ISO Iron and Steel Product Standards

  • Appendix 9 - ASTM A 941-03 Terminolody Relating to Steel, Stainless Steel, Related Alloys and Ferroalloys

  • Appendix 10 - ASTM E 527-83 (2003) Numbering Metals and Alloys (UNS)

  • Appendix 11 - SI Quick Reference Guide

  • Steel Grade/Name Index

  • UNS Number Index

  • Steel Number Index

  • Specification Designation Index

Tài liệu cùng người dùng

  • Đang cập nhật ...

Tài liệu liên quan