How do global variables differ from regular (local) variables? doc

31 257 0
How do global variables differ from regular (local) variables? doc

Đang tải... (xem toàn văn)

Tài liệu hạn chế xem trước, để xem đầy đủ mời bạn chọn Tải xuống

Thông tin tài liệu

How do global variables differ from regular (local) variables? Each function in MATLAB contains a set of variables specific to that function. Even in the same .m file, you don’t have (direct) access to variables created in other functions within the file. Global variables give you the ability to create/change a variable in one function and have that updated variable accessible elsewhere. This post will discuss two methods for handling (no pun intended) global variables, one of which is perfectly integrated into Graphical User Interfaces (GUIs). METHOD 1: global VARIABLE The first (non-GUI) way to create a global variable is to use the function ‘global’. Create the global variables X, Y, and Z with the command: global X Y Z The ‘global’ function needs to be called in each separate function (usually in the beginning) where the variables will be called. Stylistically, the variable names are usually longer names and all in CAPS to indicate global variables within the functions. The documented example in the MATLAB helps shows this pretty well: function tic global TICTOC %define/incorporate global variable at start of function TICTOC = clock; function t = toc global TICTOC %accesses variable TICTOC (or creates it if TICTOC is undefined) if nargout < 1 elapsed_time = etime(clock, TICTOC) else t = etime(clock, TICTOC); end Many hard-core coders prefer to avoid using ‘global’ except for constants. The reason behind this is because it’s generally considered poor form to lock up a variable name (See Steve L’s comment below for another reason!). While this won’t matter for smaller programs and functions, when the files get to be many hundreds (or thousands or millions) of lines long, it can be very difficult to keep track of all of the global variables and to remember to call all the necessary variables at the start of each function. The great thing about GUIs is that they already have a built-in global structure to deal with all of your global variables: the handles. The handles structure is an input (and therefore accessible) to every function in the GUI, making it perfectly capable doing everything the ‘global’ command can. In fact, you shouldn’t ever have to use ‘global’ command when designing a GUI because the handles structure does the job so well. GUIs and ‘global’ don’t mix kids! METHOD 2: handles.variable As you may have seen from many of the blinkdagger GUI tutorials, the handles structure is an extremely useful method to manipulate GUI boxes/buttons/tools. But the tool data are all just stored variables that can be accessed anywhere within the GUI (aka global variables!). Since we don’t need to edit any ‘property’ of the handles structure (e.g. handles.static_text, ‘String’), we don’t need to use the ‘get’/’set’ commands. Creating the global variable is as easy as saying: handles.x = 42; %And of course, don't forget to update your handles structure: guidata(hObject, handles); handles.x is now an independent variable and note that it has no relation to the local variable x. x = 43; is a completely valid command in the same function that would not overwrite your global variable ‘handles.x’. Remember, these variables can range from constants (e.g. 12) to strings (e.g. ‘Hello World’) to structures, cells, and arrays of constants/strings. Hopefully you can see the usefullness of global variables and will use them (properly!) in your coding adventures. 11 Responses to “MATLAB - Global Variables” 1. on 30 Jun 2009 at 9:02 am 1Andrew Scott When I started using GUIs a couple of years ago I couldn’t get this right, so ended up storing all my global variables via setappdata(gcbf, ’string’, data). I’ve never had a problem with this, although it is more cumbersome than the handles method you describe here. I think I’ll use your method in future. 2. on 30 Jun 2009 at 9:35 am 2 Steve L Zane, In the first method you said “Many hard-core coders prefer to avoid using ‘global’ except for constants. The reason behind this is because it’s generally considered poor form to lock up a variable name.” That’s one reason to avoid using global variables, but a much stronger reason to avoid using global variables is that it can lead to bugs that are very difficult and time consuming to locate, particularly in the context of a GUI. Suppose I write a function that uses a global variable x. function y = myglobalsquare global x if isempty(x) x = 5; end y = x^2; In isolation, this function works perfectly fine. I set the value of the global variable x and then call myglobalsquare, and I get back the value x^2. Now I incorporate this function into a GUI. I set it as the callback for one of my GUI’s uicontrols and have another uicontrol’s callback set the value of the global variable x. I test it and it works, and I go on finishing up the GUI. But suddenly, when I introduce a new object into the GUI and set up its callback, my “Square” button no longer works! What’s going on? I haven’t made any changes to the Square button in hours! The problem, I find out after spending a LOT of time looking at myglobalsquare and the callback that sets the global variable x, is that the callback for the new object I introduced in the GUI _also_ uses the global variable x. Because of that callback function’s manipulation of the global variable, the myglobalsquare function no longer works the way I expect it to. If you think of a function workspace as a house, with the input arguments coming in the front door and the output arguments leaving by the back door, a global variable is an open window that anyone can crawl through and move your furniture around, potentially without you realizing it until you invite a very important guest (the data for the real problem you’re trying to solve, not the data you’ve used to test the function) for a visit. On a side note, I suppose that would make a nested function an apartment in an apartment complex, where the landlord has the right to come in and move stuff around in certain circumstances [mainly maintenance or emergency situations] and the resident doesn’t have the right to do certain things [like paint the walls.] 3. on 30 Jun 2009 at 10:22 am 3 Zane Montgomery I love the analogy. Thanks for the tip Steve! 4. on 01 Jul 2009 at 6:43 am 4 MATLABDoug ARGHH! Globals make me crazy… The handles structure is not global. It is passed around to all the callbacks in a GUI by default, but it is not global. I know this is partially a religious issue, but I see way too many people abusing true global variables because they do not understand scoping of variables and then they end up in a real mess later. Please do not use global variables unless you can explain to your teddy bear (http://sjbdeveloper.blogspot.com/2006/03/teddy-bear-code-reviews.html) why you really need them. My bet is you would be better off without them. See below for alternatives. On to my next religious issue: the handles structure is for handles. It just feels untidy to put data in a structure specifically labeled for handles. I see people putting just tons of data into the handles structure and it becomes a real mess. Is it going to cause as many problems as globals? Not likely. However, I highly recommend the use of GETAPPDATA and SETAPPDATA as shown in this video: http://blogs.mathworks.com/videos/2005/10/03/guide-video-part-two/ To me, this is cleaner. Loren is a fan of nested functions http://blogs.mathworks.com/loren/2008/01/16/nested-functions-and-variable- scope/ Please consider the alternative before using unneeded globals. Globals are often the cause of really tricky errors. Globals are just quicker, easier, more seductive. Use nested functions or appdata, not as clumsy or random as a global. An elegant weapon, for a more civilized age. -Doug  Anonymous Is it ok to use the userdata from the root? like ud=get(0,’userdata’); ud.x=42; set(0,’userdata’,ud);  on 02 Jul 2009 at 2:38 pm 6Anonymous I’m writing GUIs that contain some pretty large data arrays, and don’t want these to be unnecessary duplicated, using up RAM. I’m currently using global variables. Whilst I appreciate the elegance of Method 2, would switching to this effectively double my memory usage (with one copy of the data in the GUI’s handles structure, and the other in the local handles copy)?  on 01 Aug 2009 at 10:43 am 7Dey Hi all I apologize in advance because I don’t have a clue how start a new post… I need a script which does the following.: I have the following directory structures C:/Big/ecm/sDDP/new/level1/level1_1/level1_1_1/*.ext C:/Big/ecm/sDDP/new/level1/level1_1/level1_1_2/*.ext C:/Big/ecm/sDDP/new/level1/level1_1/level1_1_3/*.ext . . . C:/Big/ecm/sDDP/new/level2/level2_1/level2_1_1/*.ext C:/Big/ecm/sDDP/new/level2/level2_1/level2_1_2/*.ext C:/Big/ecm/sDDP/new/level2/level2_1/level2_1_3/*.ext . . . etc. I want to go through the folders levelx_y_z(where x, y, z stands for 1_1_1, 1_1_2 etc.) to get the files *.ext. I don’t want to select these files manually with ‘uigetfile’, because it’s very time consuming. Could anyone help me please. I tried something with ‘fullfile(path, ‘*.ext’)’ but then I still have to specify each path. P.s. The folders levelx/levelx_y/level/x_y_z are named otherwise actually. I just wanted to illustrate the structure  who can everyone help me! i’m unstill about the gui ,i want to show the transfer function iin the Guide ,but how don’t know begin my following topic: for G(S)=(7s^2+16s+10)/(s^4+5s^3+11s^2+16s+10) and have to show : + time set + bulk acceleration +error set in the Guide i hope you can make it help me thank you  on 23 Jan 2011 at 11:45 am 9Ameya Having a Problem trying to plot an imported array, the gui does not except a code from another .m file even though it’s shown in the workspace…Kindly help Dey You can solve your problem in one line with a regular expression: regexp(text, expression) You can get the text input from dir and the expression below should match your files: ‘C:/Big/ecm/sDDP/new/level\d+/level\d+_\d+/level\d+_\d+_\d+/.*\.ext’ It may be a good idea to experiment a bit with regexp to get familiar with it since it can be a bit tricky to get the expressions right. MATLAB GUI Tutorial - UITABLE Part 2, How To Access Table Data Last time, we learned how to display data onto a table. This time, we’re going to learn how to work with table data within a GUI framework. For example, say you wanted to take the contents of the table manipulate the data. This tutorial will explain how to do that, and much more. Contents • Accessing Table Data within GUI Callbacks • Accessing only the Selected Data • Next Time • Links and Downloads Accessing Table Data within GUI Callbacks Let’s say you have the following GUI: For simplicity sake, let’s assume that you would like to create a button that will add 3 to each of the entries of the table when the button is pressed. How would you go about doing this? It’s actually quite straightforward. Let’s take a look at the callback for the add button: function add_pushbutton_Callback(hObject, eventdata, handles) % hObject handle to add_pushbutton (see GCBO) % eventdata reserved - to be defined in a future version of MATLAB % handles structure with handles and user data (see GUIDATA) %get the table data tableData = get(handles.uitable1,'data'); %add 3 to the table tableData = tableData + 3; %update the table set(handles.uitable1,'data',tableData); So now, when I press the “Add 3″ button, it adds 3 to the table! This is just a simple example to show how to extract the data from the UITABLE, and to perform an operation on it. Accessing only the Selected Data Now, let’s up the difficulty level a bit. Let’s say you selected a couple of cells that you want to sum, as shown in the image below (You can hold onto the CTRL button while clicking on individual cells to select multiple cells). How would you go about doing this? Read on and all will be revealed. Enabling CellSelectionCallback The first thing we need to do is to enable the Cell Selection Callback. But first, why are we doing this? Enabling this callback will allow us to keep track of what cells are being selected on the table. You can do this by bringing up the Property Inspector for the UITABLE, and then clicking the following icon as shown in the image below. If you did it correctly, your m-file should have been updated to include the following: % Executes when selected cell(s) is changed in uitable1. function uitable1_CellSelectionCallback(hObject, eventdata, handles) % hObject handle to uitable1 (see GCBO) % eventdata structure with the following fields (see UITABLE) % Indices: row and column indices of the cell(s) currently selecteds % handles structure with handles and user data (see GUIDATA) In addition, the CellSelectionCallback field should now be populated as shown in the image below: [...]... talk about some of the cool features of the UITABLE that we have not yet discussed, including different data types within the UITABLE Links and Downloads Download Source Files The MathWorks Documentation for UITABLE Cool Things You can do with UITABLE Doug’s Video on UITABLE MATLAB GUI Tutorial - UITABLE Part 1, How to Display Data With the release of MATLAB 2008b, you are now able to add tables to a GUI... change And if you are going to apply dynamic labeling, then working from the m-file is going to be much easier Next Time Next time, we’re going to talk about how to work with manipulating the data within the table Links and Downloads Download Source Files The MathWorks Documentation for UITABLE Cool Things You can do with UITABLE Doug’s Video on UITABLE MATLAB GUI - Tool Tips are your Friends! What... in separate m-file and call that m-file in the opening function Download the Source Files and Other Links Download the source files here Yair’s Undocumented Tips on How to Spice up Tooltips Pimp My Gui Part 3: Help Me Help Yourself Blinkdagger proudly presents Pimp My Gui, a series that will provide our readers with tips and tricks on how they can make their GUIs beautiful on both the inside and outside... This can be done by double clicking the UITABLE component Now, if you click on any of the fields in the above picture, it will bring up the Table Property Editor This is where you can add Row and Column labels For example: Make sure you click on the “Rows”, and that you select the “Show names entered below as the row headers” option Finally, you just need to modify the names Similarly, you can do the same... For example, the following image shows how I originally had my m-files organized The main GUI files are Tutor_Commuter_QQ_05.fig and Tutor_Commuter_QQ_05.m The rest of the files are used in creating the help In the following image, you can see how I reorganized the files All the files except the main files are placed in the subfunctions folder Now, all that has to done is to add the path of the subfunctions... fill out the table according to the size of the data matrix that you feed it So if I had done the following instead: myData = rand(100,100); The table would incorporate the use of scroll bars, as shown below Adding Column and Row Labels A good way to spruce up your table is to add row and column labels This helps differentiate your data and makes it easy to identify Within the GUIDE framework, we can... button: • Tool tip for the first input parameter: • Tool tip for the second input parameter: How to Add Tool Tips Within the GUIDE editor, you can add a tool tip by modifying the “TooltipString” property using the Property Inspector Simply double click on the component to bring up the Property Inspector The image below shows that the “TooltipString” property has been modified for the Add! button Adding Tool... you can do the same for the columns Once you’re done with that you should see the following: And once you run your GUI, you can see the final result A well labeled table that displays your data beautifully! Modifying your Table through the m-file Sometimes it’s easier to work from within the m-file framework, rather than the GUIDE framework We could have done exactly what we did above programmatically... have done the following: %store the row headers into a cell array rowHeaders = {'Blink','Dagger','Loves','MATLAB','!!!!!!'}; %set the row labels set(handles.uitable1,'RowName',rowHeaders); %do the same for the column headers columnHeaders = {'Quan','Daniel','Rob','Zane'}; set(handles.uitable1,'ColumnName',columnHeaders); In this example, we assumed that we knew the dimensions of our table If you don’t... you could do the following in the opening function of the GUI: %put this code into the opening function of the GUI set(handles.input1_editText,'TooltipString','This is the first input.') set(handles.input2_editText,'TooltipString','This is the second input.') set(handles.add_pushbutton,'TooltipString','This is a tool tip! Press to add.') If you have a large list of tooltips, you may want to do it in . How do global variables differ from regular (local) variables? Each function in MATLAB contains a set of variables specific to that function. Even in the same .m file, you don’t have. in CAPS to indicate global variables within the functions. The documented example in the MATLAB helps shows this pretty well: function tic global TICTOC %define/incorporate global variable at. many people abusing true global variables because they do not understand scoping of variables and then they end up in a real mess later. Please do not use global variables unless you can explain

Ngày đăng: 01/08/2014, 08:20

Từ khóa liên quan

Mục lục

  • How do global variables differ from regular (local) variables?

  • METHOD 1: global VARIABLE

  • METHOD 2: handles.variable

    • 11 Responses to “MATLAB - Global Variables”

  • MATLAB GUI Tutorial - UITABLE Part 2, How To Access Table Data

  • Contents

  • Accessing Table Data within GUI Callbacks

  • Accessing only the Selected Data

  • Enabling CellSelectionCallback

  • Adding the Necessary Code

  • Adding the Selected Numbers Together

  • Next Time

  • Links and Downloads

  • MATLAB GUI Tutorial - UITABLE Part 1, How to Display Data

  • Contents

  • Adding a Table to Your GUI using GUIDE

  • Displaying Data on the Table

  • Adding Column and Row Labels

  • Modifying your Table through the m-file

  • Next Time

  • Links and Downloads

  • MATLAB GUI - Tool Tips are your Friends!

  • What is a Tool Tip?

  • How to Add Tool Tips

  • Adding Tool Tips Programmatically

  • Download the Source Files and Other Links

  • Pimp My Gui Part 3: Help Me Help Yourself

  • Contents

  • How to use this GUI: Quick User Guide

  • About this GUI

  • Putting it all together

  • Addpath

  • Next Time

Tài liệu cùng người dùng

  • Đang cập nhật ...

Tài liệu liên quan