303-05A-1 Accessory Drive — 2.5L Duratec-HE (122kW/165PS) - MI4 303-05A-1 SECTION 303-05A Accessory Drive — 2.5L Duratec-HE (122kW/165PS) - MI4 VEHICLE APPLICATION: 2011.50 Ranger CONTENTS PAGE DESCRIPTION AND OPERATION Accessory Drive 303-05A-2 REMOVAL AND INSTALLATION Accessory Drive Belt (21 567 0) Accessory Drive Belt Tensioner (21 569 0) 303-05A-4 303-05A-5 Accessory Drive — 2.5L Duratec-HE (122kW/165PS) - MI4 303-05A-2 303-05A-2 DESCRIPTION AND OPERATION Accessory Drive Vehicles with air conditioning Item Description Item Description Alternator Accessory drive belt Accessory drive belt idler pulley Air conditioning (A/C) compressor Coolant pump pulley Crankshaft pulley Power steering pump pulley Accessory drive belt tensioner pulley 2011.50 Ranger G1272509en Accessory Drive — 2.5L Duratec-HE (122kW/165PS) - MI4 303-05A-3 303-05A-3 DESCRIPTION AND OPERATION Vehicles without air conditioning Item Description Alternator Accessory drive belt idler pulley Coolant pump pulley Power steering pump pulley Accessory drive belt Accessory drive belt idler pulley Crankshaft pulley Accessory drive belt tensioner pulley 2011.50 Ranger G1272509en 303-05A-4 Accessory Drive — 2.5L Duratec-HE (122kW/165PS) - MI4 303-05A-4 REMOVAL AND INSTALLATION Accessory Drive Belt(21 567 0) Special Tool(s) 303-676 Release Tool, Belt Tensioner Installation Removal NOTE: Removal steps in this procedure may contain installation details Refer to: Lifting (100-02 Jacking and Lifting, Description and Operation) To install, reverse the removal procedure Refer to: Accessory Drive (303-05 Accessory Drive - 2.5L Duratec-HE (122kW/165PS) MI4, Description and Operation) Torque: 30 Nm Rotate the accessory drive belt tensioner clockwise and remove the accessory drive belt Remove the Special Tool(s): 303-676 2011.50 Ranger G1272512en 303-05A-5 Accessory Drive — 2.5L Duratec-HE (122kW/165PS) - MI4 303-05A-5 REMOVAL AND INSTALLATION Accessory Drive Belt Tensioner(21 569 0) Removal NOTE: Removal steps in this procedure may contain installation details Refer to: Accessory Drive Belt (303-05 Accessory Drive - 2.5L Duratec-HE (122kW/165PS) - MI4, Removal and Installation) NOTE: The accessory drive belt tensioner must be replaced as a complete unit Torque: 25 Nm Installation To install, reverse the removal procedure 2011.50 Ranger G1272541en